1 / 8

Steps To Be Taken For Repairing Concrete Floors

There are many reasons a concrete floor would need repair such as: cracks made by expansion, the contraction of the floor etc. Repair Specialists from Direct Concrete Remedials can help you with any kinds of Concrete Floor Repairs.

DirectConcreteRemedi
Télécharger la présentation

Steps To Be Taken For Repairing Concrete Floors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Steps To Be Taken For Repairing Concrete Floors CALL US ON 01454 324 236 www.directconcreteremedials.co.uk

  2. STEPS TO CONSIDER FOR CONCRETE FLOOR REPAIRING STEP-1:-Determine the scope of the problem STEP-2:-Use a ruler to determine the length and width of the area to be repaired if the condition does not define itself.  STEP-3:-Chip the surface of the concrete to remove any high material, and to create a rough surface for the repair cement mixture to bond to. STEP-4:-Clean the dust and debris from the area you have chipped. 

  3. STEPS TO CONSIDER FOR CONCRETE FLOOR REPAIRING STEP 5:-Mix the cement/sand material you will use to fill in the area you have chipped out.  STEP-6:-Add a latex or polymerized liquid bonding agent to the dry sand/cement mixture, using enough to thoroughly wet the material and bring it to a stiff, plastic consistency.  STEP-7:-Wet the area where the patch is to be applied with clean, fresh water.

  4. STEPS TO CONSIDER FOR CONCRETE FLOOR REPAIRING STEP-8:-Scoop some of your cement mixture out of your mixing container with a bull-nosed pointing trowel (or other suitable tool). STEP-9:-Level the surface of the wet cement with the trowel, leaving it slightly higher than the adjacent edges, to allow for settling and shrinkage. STEP-10:-Trowel the area with a steel finishing trowel when the patch material has become stiff.

  5. STEPS TO CONSIDER FOR CONCRETE FLOOR REPAIRING STEP-11:-Give the area another hour or two so that it sets up, or becomes hard, then finish trowel ling it. STEP-12:-Clean your tools, and remove any excess material. By following these 12 steps you will definitely get the best result.

  6. Concrete Repair Specialists If your concrete surface is cracked and worn, you need to repair it immediately. Hire Concrete Repair Specialists from Direct Concrete Remedials for affordable repairs of residential and commercial concrete surfaces.

  7. ABOUT US We are based in the south west of the UK. We are specialized in concrete repair, bollards installation, concrete floor repairs, structural and cosmetic repairs. Our management team will go through your requirements by visiting your site properly. We provide risk and method statements and equipment and COSHH Assessments for every project by following the safest cost effective procedure.

  8. CONTACT US • Our management team will thoroughly go through your site to find out the problems before commencing any project. • You can contact us on our number 01454 324 236 • Our team will give you feedback as soon as possible. • Keep visiting on our site for more information. www.directconcreteremedials.co.uk

More Related