New 1Z0-580 Oracle Study Guide V9.02 | Killtest

2. The safer , easier way to help you pass any IT exams. 1.You have just completed a default oracle solaris 11 installation of a new server system. While testing network connectivity from your desktop to the server, you find that you are not able to communicate with the “sendmail”service from your desktop. Why is this? A. by default,”sendmail” solftware is not installed. B. by default,”sendmail” is not enabled on the system. C. by default,”sendmail” access is blocked by TCP Wrappers. D. by default.”sendmail” responds to local requests only. E. by default.”sendmail” is running on its encrypted port. Answer: D 2.What answer includes three correct methods available to transition oracle solaris 10 environments to oracle solaris 11? A. Solaris Upgrade installation, Live Upgrade, js2ai and Automated Install B. Solaris Flash Arhive Installation, ZFS shadow migration, NFS sharing and pool migration C. Custom JumpStart, Oracle Solaris 10 non-global zones, lu2be Conversion Utility D. NFS file sharing and Pool migration, ZFS shadow migration.JumpStart Migration Utility E. lu2be Conversion Utility, Solaris Flash Archive installation, Puppet Answer: D 3.Your system has two disk devices, c2t0d0 and c2t1d0, and two flash devices, c2t5d0 and c2t8d0. Which command would you use to create a storage pool named “tank”, which mirrors the disks and adds the two flash devices as “cache”? A. zpool create tank mirror c2t0d0 c2t1d0 mirror c2t5d0 c2t8d0 B. zpool create tank mirror c2t0d0 c2t1d0 log mirror c2t5d0 c2t8d0 C. zpool c2t0d0 c2t1d0 cache c2t5d0 c2t8d0 mirror D. zpool create tank mirror c2t0d0 c2t1d0 cache c2t5d0 c2t8d0 E. zpool create tank raidz2 c2t0d0 c2t1d0 c2t5d0 c2t8d0 Answer: D 4.The storage administrator is configuring an iSCSI host to boot from the SAN. Which hardware component is required for the iSCSI host? A. The iSCSIhost can use a NIC card to boot from the SAN. B. The iSCSI host must use a ToEcard to boot from the SAN. C. The iSCSI host must use a NIC card to boot from the SAN. D. The iSCSI host can use a ToE card to boot from the SAN. Answer: D 5.What is the difference between the default configuration for zones and an immutable zone? A. Immutable zones cannot have users. B. Immutable zones cannot be modified from within the zone. C. Immutable zones cannot run DTrace. D. A process in an immutable zone can see processes in other zones. Answer: B 1 / 11

3. The safer , easier way to help you pass any IT exams. 6.Which three ZFS options may be combined to provide zones storage with data security and a minimal storage footprint? A. encryption=on B. security=on C. dedup=on D. compression=on E. zoned=on Answer: ADE 7.Which five steps (dealing with first-boot script creation ) can be omitted when working with provisioning oracle solaris 11 zones and services with appropriate zone context? 1. Create the first-boot script. 2. Create the manifest for an SMF service that runs once at first boot and executes the script. 3. Create an IPS package that contains the service manifest and the script. 4. Add the package to an IPS package repository 5. Install that package during the Automated Installer installation by specifying that package in the AI manifest. A. Step l can be omitted because the first-boot script is already deployed in the Global Zone B. Step 3 can be omitted because zones do…t require IPS packages and can accept SVR4 packages C. None of the steps can be omitted D. Step 5 can be omitted because Zones are not installable using Automated installer, yet. E. Step 2 can be omitted because zones do not have a concept of is booted, the script executes for all Zones. Answer: C 8.Which command would you use, if running tools like vmstat and prstat is resulting in “file not found” errors? A. pkg B. installadm C. boot net:dhcp- install D. format E. fdisk Answer: A 9.A customer has forgotten the root password for one of his oracle solaris 11 x 86 servers. What is the correct method to enable him to recover or change the root password on his system? A. Re-install Oracle Solaris 11 and create a new root password for the system. B. Reboot the system by using the init 6 command, interrupt the boot process, log in as root, and modify the system’s password file by using vi. C. Boot the system from the LiveCD, assume the root, mount the Oracle Solaris instance, and modify the system’s password file. D. Contact Oracle Support to obtain the Master System Password for all x86 systems, they will provide you with an encrypted master password that will allow for root password recovery. 2 / 11

4. The safer , easier way to help you pass any IT exams. E. Reboot the system into single user mode, then change the root password by using vi. Answer: C 10.The storage administrator has installed an Axiom and would like to change the system name and provide a brief description. Which action would the storage administrator need to complete? A. modifying Network Settings B. modifying Asset Information C. modifying System Time D. modifying Security Settings Answer: B 11.You are working on a system that appears to be hanging during the boot process. Which would be the best course of action for determining which step in the boot process is causing the issue? A. Boot the system into single user mode, run ps-ef to determine processes that are not running B. Boot the system into the “none” milestone, enable all services, then run svcs- a to determine the services, as well as check for error messages in/var/svc/log. C. Boot the system, disable all services using the “svcs disable all” command, reboot and bring up each service individually. D. Interrupt the boot process before services are started with Stop-A or<CTRL><ALT><DELETE>. E. Perform an interactive boot, and disable services as they request startup. Answer: B 12.Which two statements are true when configuring and installing zones using automated installer? A. Non-global zones are installed and configured on the first reboot after the global zone is installed. B. When a system is installed using Automated Installer, non-global zones can be installed on that system by using the zone element in the AI manifest. C. When the system first boots after the global zones installation, the zones self-assembly SMF service configures and installs each non-global zone defined in the global zone AI manifest. D. Labeled zones are autobooted if the zone is configured with autoboot=true, irrespective of the global zone. Answer: AC 13.A developer wants to use DTrace in a zone to examine the kernel. What are his options? A. Modify the zone so that he can use DTrace to examine kennel data structures. B. All that’s required is to assume the "root" role. C. By using dtrace_proc and dtrace_user privileges he can examine his own code, but not the kernel. D. By adding ipc_dac_read and ipc_dac_write privileges to the zone. E. Change the zone's file-mac-profile from strict to none to enable the use of DTrace within the zone. Answer: C 14.Which two options do you absolutely need to have in place in order to successfully customize the network installation of an oracle Solaris 11 x86 system? 3 / 11

5. The safer , easier way to help you pass any IT exams. A. two Automated Installer manifests，one for x86 systems and another ore for SPARC systems B. an SMF system configuration profile C. an x80 system running Automated Installer service D. either a SPARC or an x86 system running Automated Installer service E. an Oracle Solaris l l IPS repository hosted in your own data center Answer: BD 15.When upgrading to Oracle Solaris l11 from Oracle Solaris 11 Express or Oracle Solaris 11 Early Adopter, the process suddenly fails． Which command can you rely upon to get you to a good known state where you can still boot the Oracle Solaris 11 Express or Oracle Solaris 11 Early Adopter image, as they were, prior to your upgrade attempt? A. pkg B. beadm C. installadm D. zfs E. ifconfig Answer: B 16.What two entries could compete the following command from the directory listing below? A. inetboot.SUN4U.Solaris_10-1 B. inetboot.SUN4V.Solaris_10-1 C. nbp. D. pxegrub.I86PC. Solaris_10-1 E. sllgrub.i86pc Answer: DE 17.After installing and customizing an oracle Solaris 11 non-global (Solaris brand) zone, you execute these commands： A. This change prevents MAC address spoofing by requiring outbound network packets to have a predefined value. B. This change enables support within the zone for Mac OS X extended file attributes for the zone root file system． C. This change restricts user access to objects in the zone based upon their Oracle Solaris Trusted Extension labels． 4 / 11

6. The safer , easier way to help you pass any IT exams. D. This change prevents the zone from being able to mount any remote file systems once the zone has been booted. E. This change forces the zone root file system into a read-only state where only pares of/var are writable． Answer: E 18.The beadm utility___. A. can create and manage both UFS and ZFS boot environments B. cannot manage boot environment snapshots C. can be used only on Solaris 11 for x86 systems that use GRUB D. can manage boot environments in non-global zones E. cannot create a new boot environment from an inactive boot environment Answer: B 19.What two benefits will oracle and our customers likely realize by utilizing a fully integrated stack architecture? A. They will receive hardware and software designed to work together． B. Maintenance for the overall enterprise will be simplified． C. Technical support will need to come from different vendors and the customer will need to manage separate support contracts. D. Customers will be locked into the Oracle architecture. E. Customers will need to deal with more bugs and patches． Answer: AB 20.What has become the default graphical user interface for oracle Solaris 11 desktop operation? A. CDE (Common Desktop Environment) B. Gnome Desktop C. x-Window System D. Firefox Web Browser E. Java Desktop Answer: B 21.Your installation has completed successfully and the system did not reboot automatically. Which option would cause this? A. Automatic reboots are only allowed when invoked via SMF． B. The client never reboots automatically after the successful installation，staying available for manual verification of the install process． C. The”auto_rebaot”parameter in the Automated Installer manifest has not been set to”true．” D. The “installadm” service needed to be refreshed for the”auto_reboot”setting is to be applied, so all clients being installed from it could reboot． E. Post installation reboots are no longer necessary because the Oracle Solaris 11 Automated Installation installs and activates the system’s services in the desired state such that there is no need for a reboot． Answer: C 5 / 11

7. The safer , easier way to help you pass any IT exams. 22.Assuming that a user called "operator" exists on the system and is configured to use a profile shell, what is the impact of the following sequence of commands? A. The "operator" account will be able to configure NTP properties. B. The "operator" account will be able to restart the NTP service. C. The "operator" account will not be able to log in using SSH. D. The "operator" account will not be impacted by these changes. E. The "operator" account will only be accessible using "su" Answer: A 23.What are the two reasons that network configurations are set using svccfg,ipadm,and nscfg? A. to check for proper syntax before applying a change B. to comply with Sarbane-Oxley and Payment Card Industry specifications C. to hide defaults from casual users D. because the vi (1) text editor is no longer available E. to use SMF Answer: CE 24.The “pkg update” command will__. A. update all packages that have updates available including the kernel B. update all packages that have updates available excluding the kernel C. update only the kernel image D. update the global zone packages and non-global zone packages E. update all packages and the kernel, and then automatically reboot the system Answer: A 25.Which command can be used to determine which apache web server packages are installed? A. pkg list apache B. pkg list *apache* C. pkg list installed apache D. pkg list all apache E. pkg list all web installed Answer: A 26.Name three items that illustrate the business value of an integrated stack approach. A. The integrated stack method of product development optimizes performance． B. Multiple products from multiple vendors add up to an easier support structure and less fingerpointing when issues arise. 6 / 11

8. The safer , easier way to help you pass any IT exams. C. Support and implementation issues are minimized with an integrated stack． D. An integrated stack will help to deliver faster innovation. E. To a smaller customer an integrated stack means that they need to purchase everything from one vendor. Answer: ACD 27.When conducting an installation using Live Media(such as the Live DVD image, for example), the system boots into Console mode because the system’s graphics card is not supported by the contents of the Live Media. In lieu of downloading and using the Text Installer image, you opt to perform a remote installation using a second system. Do both systems have to be on the same subnet in order for this method of installation to succeed? A. Yes, furthermore they also have to be of the same architecture B. No, even though they must be of the same architecture. C. Insufficient information provided with respect to how they are networked D. Yes, they both have to be on the same subnet and moreover, have to be of the same architecture. E. No，they do not have to be on the same subnet, and do not have to be of the same architecture. Answer: E 28.What physical devices will be used in sequence to boot the system, given the following output? A. disk then net B. /pci@780/pci@0/pci@1/network@0 then/pci@780/pci@0/pci@9/scsi@0/disk@0 C. /pci@780/pci@0/pci@9/scsi@0 then/pci@780/pci@0/pci@1/network@0 D. /pci@780/pci@0/pci@9/scsi@0/disk@1 then/pci@780/pci@0/pci@1/network@0,1 E. /pcie780/pcie0/pcie9/scsie0/disk@0 then/tpci@780/pci@0/pci@1/network@0 Answer: B 29.The storage administrator is creating a volume and wants to protect it from a full Brick failure. Identify the protection level needed to accomplish this configuration. A. Standard Redundancy 7 / 11

9. The safer , easier way to help you pass any IT exams. B. RAID10 C. Double Redundancy D. assigning the volume toa Storage Domain Answer: C 30.When configuring zones using automated installer, the following line is found in the manifest: A. the configuration file for the global zone B. the resource groups for the “tree” Server C. the configuration file for the non-global zones D. the required corresponding open-source disclaimer E. the location of the “apple” IPS repo Answer: B 31.Which two actions must be taken to enable IP forwarding on all infterfaces yet disable on a specific interface? A. routeadm-r B. ipadm set-addrprop C. ipadm set-ifprop D. routeadm-e E. dladm set-router Answer: AE 32.Which command would result in safely detaching a disk or disks from a mirrored pool to create another identical pool? A. zfs split tank1 tank2 B. zpool create tank mirror c1t0d0 c2t0d0 C. zpool split tank1 tank2 D. zpool detach tank c1t0d0 E. zpool replace tank c1t1do c2tOd0 Answer: C 33.What two features identify oracle solaris 11 as bing “built for clouds”? A. ability to use SSH to securely connect to Oracle Solaris 11 servers B. first fully virtualized operating system featuring built-in virtualization with Zones C. secure rapid provisioning and lifecycle management D. Oracle Solaris 11 has been designed to provide a robust and easily usable desktop environment for end users E. Oracle Solaris 11 is installable from DVD Media Answer: BD 34.The dladm command manages these: A. NICs 8 / 11

10. The safer , easier way to help you pass any IT exams. B. VNICs C. VLANs D. Bridges E. Routers Answer: BCD 35.Identify two things that happen to the Private Interconnect Topology Manager tool, PITMAN, when a warmstart of the Slammer occurs. A. Private Interconnect Topology Manager terminates its operation when running in manual mode. B. Private Interconnect Topology Manager restarts Its operation when running in manual mode. C. Private Interconnect Topology Manager terminates its operation when running in automatic mode. D. Private Interconnect Topology Manager returns to a monitoring state when running in automatic mode. E. Private Interconnect Topology Manager suspends its operation when running In automatic mode. F. Private Interconnect Topology Manager suspends Its operation when running in manual mode. Answer: A,D 36.Which IPS task requires special privileges? A. Determine if a package is installed or can be updated. B. Identify the group to which a package belongs． C. Determine if a package is in a particular category． D. Determine if a package delivers a specified file. E. Create a copy of an existing IPS package repository． Answer: C 37.The storage administrator is installing a single slammer Axiom with both FC and iSCSI. Identify the number of SAN Fabric ports that the storage administrator will need for the Axiom. A. 2 ISCSI ports B. 4 iSCSI ports C. 2 FC ports D. 4 FC ports Answer: A 38.Best practice for creating local IPS repositories recommends ______. A. avoiding the use of ZFS to host repositories B. creating a separate ZFS file system for each repository C. hosting local repositories on separate servers D. replicating all publishers across all repository servers E. creating one large repository for all required software Answer: B 39.A customer has multiple applications and you believe consolidation using Oracle Solaris Zones will help them. The customer is concerned that consolidating them all on one physical server may cause adverse interactions between them, causing problems with functionality, security, and performance． What are the two benefits of Zones that would explain why Zones would be a good choice? 9 / 11

11. The safer , easier way to help you pass any IT exams. A. better single threaded performance B. better software isolation C. better hardware isolation D. simpler VLAN management E. simple，effective resource controls Answer: BE 40.You are implementing three workloads, one in each of three zones. Which fire factors should you consider when configuring networking? A. Are VLANs in use? B. The quantity of physical NICs in the system. C. The network bandwidth needs of the workloads． D. Which layer 4 protocol family is in use: TCP or UDP? E. The range of IP addresses that each zone can use． F. The amount of processing capacity needed to handle network interrupts for each Zone. Answer: ABCEF 41.When upgrading to oracle solaris 11 from oracle solaris 10,the Live Upgrade utilities are ______. A. enhanced to automatically use js2ai and convert jumpstart rules to AI profiles and criteria B. not available because there is no upgrade method from Oracle Solaris lo to Oracle Solaris 11 C. available in a separate SVR4 package that you have to install onto Oracle Solaris 10 first D. only available to you if you have a support agreement in place with Oracle E. available at no cost from an IPS repository hosted all http://pkg.oracle.com Answer: A 42.Which is the preferred command to manage layer 3 network properties in oracle Solaris 11? A. dladm B. ipadm C. ifconfig D. netstat E. azp Answer: B 43.What is the next step in the network boot operation of this system, given the information below? ****************************************************************************************************** Boot Device Priority * Specifies the boot * * ************************************************************************************************** *1st boot Device [Network：IBA GE SIo ] * available devices．* *2nd Boot Device [RAID: ASR-5805 PCI-]* * *3th Boot Device [USB: TSSTcorp CD/DV]*A device enclosed in * *4th Boot Device [Network: IBA GE Slo] * parenthesis has been * *5th Boot Device [Network: IBA GE Slo] * disabled in the * *6th Boot Device [Network: IBA GE Slo] * corresponding type * **menu* 10 / 11

12. The safer , easier way to help you pass any IT exams. *** Intel(R) Boot Agent GE v1.2.42 Copyright (C) 1997-2006, Intel Corporation Intel(R) Boot Agent PXE Base Code (PXE-2.1 build 085) Copyright (C) 1997-2006, Intel Corporation CLIENT MAC ADDR: 00 1E 68 57 51 4A GUlD: 0B0020FF FFFF FFFF FFFF 001E6857514A CLIENT IP: 10.79.200.235 HASK: 255.255.255.192 DHCP IP: 10.79.200.222 GAWAY IP: 10.79.200.193 TFTP. PXE-T02: Access violation PXE-E3C: TFTP Error- Access Violation A. Contact the secondary tftp server. B. Load the pxegrub file． C. Abandon network boot and hang. D. Boot the internal raid device. E. Boot the CDROM． Answer: C 44.Which line would you remove in the GRUB‘s menu to prevent an automatic installation from commencing when booting from CD or DVD, but without intentions of installing? A. install=default B. install=true C. install=always D. install=yes E. install=now Answer: B 45.To upgrade a system from oracle solaris 10 to oracle solaris 11,it is necessary to___。 A. convert all Oracle Solaris 10 packages to Oracle Solaris 11 packages using IPS B. use IPS and Live Upgrade to install all updated software C. use IPS to replace the Oracle Solaris 10 kernel with the Oracle Solaris 11 kernel D. save user data and perform a flew Oracle Solaris 11 install; there is no upgrade method E. update Oracle Solaris 10 from an Oracle Solaris 11 repository Answer: D 11 / 11