1 / 5

Dragonfly Sculpture

Dragonfly Sculpture. with Recycled Materials. Dragonfly. Cut out wing templates. Mark out – repeat with template turned over for opposite wings. Tape in place. Apply texture to surface. Punch holes. “Stitch” wire around perimeter to stiffen. . Leave excess length at end to join to body .

Gideon
Télécharger la présentation

Dragonfly Sculpture

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dragonfly Sculpture with Recycled Materials

  2. Dragonfly • Cut out wing templates • Mark out – repeat with template turned over for opposite wings • Tape in place

  3. Apply texture to surface • Punch holes • “Stitch” wire around perimeter to stiffen. • Leave excess length at end to join to body

  4. Body • Bend wire outline and join sides with wire twisted into place • Use frame to mark out head part. Cut, texture & punch a few holes • Bind to outline with soft wire • Use wire ends on wings to bind to body • Cut panel for front of body and bind in place. Weave strips in for rear.

  5. Compare your work with this example…

More Related