1 / 31

CRE Reactor Design Project

CRE Reactor Design Project. Team #2: Kyle Lynch David Teicher Shu Xu. The Partial Oxidation of Propylene to Generate Acrolein. Overview. Project Objective Process Background Material Balance Simple Kinetics and Rate Expressions Pressure Drop and Reactor Configuration Multiple Reactions

Jims
Télécharger la présentation

CRE Reactor Design Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CRE Reactor Design Project Team #2: Kyle Lynch David Teicher Shu Xu The Partial Oxidation of Propylene to Generate Acrolein

  2. Overview • Project Objective • Process Background • Material Balance • Simple Kinetics and Rate Expressions • Pressure Drop and Reactor Configuration • Multiple Reactions • Energy Balance • Optimization and Conclusions

  3. Project Objectives • Design a Fixed Bed Reactor (FBR) for the production of acrolein by the partial oxidation of propylene • Produce 75,000 metric tons acrolein per year • Optimize the reactor design to minimize cost

  4. Project Objectives • Literature Review • Research information on raw materials and products • Investigate catalysts and reaction kinetics • Reactor Design • Develop mole balances for multiple reactions • Implement pressure drop & energy balance equations • Optimize reactor

  5. Background Information • Acrolein • Raw material used for the production of pyridine, β-picoline, and some essential amino acids1 • Used for cleaning irrigation ditches, and other derivatives can be made into rubbers, glues, and polymers2 • Anti-microbial behavior • Biocide in oil well to suppress the growth of bacteria2 • 100-500 million pounds produced in the U.S. in 20022 CH2=CH-CHO

  6. Current Industry Processes and Conditions • Industry produces acrolein by the partial oxidation of propylene using oxygen and steam • The reaction is carried out in a catalytic FBR ranging between 350-450 °C1 • Gaseous products leave and are quenched by cold water, then enter absorption column for product recovery3 CH2=CH-CH3 + O2 CH2=CH-CHO + H2O

  7. Design Development • Design 1-Preliminary mass and energy balance • Design 2-Reactor volume using simple reaction rate expression • Design 3-Pressure drop and reactor configuration • Design 4-Multiple reactions • Design 5-Energy balance on multiple reactions • Final Design-Optimization

  8. Design 1 Assumptions • A total of two weeks each year are allotted for scheduled shutdowns • All reactants and products are vapors • Air is used as an oxygen source • A 1:11 ratio of propylene:oxygen is outside the flammability limits4 • The inlet pressure is 1 atm5 • Negligible kinetic and potential energy losses • Isothermal, T=623.15 K5

  9. Design 1: Material Balance • Material balance for annual production rate of 75,000 metric tons CH2=CH-CH3 + O2 CH2=CH-CHO + H2O *Design specification for acrolein production rate is 0.04412 kmol/s

  10. Design 2 Assumptions • All Design 1 assumptions • A conversion of 0.85 will be achieved3 • 1000 kg/m3 is Catalyst bulk density6 • Reactor is at steady state • Ideal gas law applies • Simple kinetics6

  11. Design 2: Reactor Volume with Simple Kinetics • To simulate the FBR being designed, a Polymath® model was developed. • The Polymath® reactor was created as a function of catalyst weight • Aspen Plus® used to examine the relationships between temperature, reactor volume, and conversion

  12. Design 2: Reactor Volume and Simple Kinetics • Developed an isothermal reactor model as function of catalyst weight using Polymath® and ASPEN ® * Higher temperatures require smaller reactors for same conversion V= 167,000 m3

  13. Design 3 Assumptions • All Design 2 assumptions – Inlet pressure is 3 atm6 • Catalyst void fraction of 0.46 • Particle diameter of 5 mm7 • Inlet viscosity is that of pure steam4 • Schedule 40 pipe used for multi-tube reactors8

  14. Design 3: Isothermal Reactor with Pressure Drop • Implemented Ergun pressure drop equation into design • Optimized reactor so pressure drop is less than 10%

  15. Conversion with and without Pressure Drop V= 8,643 m3

  16. Conversion with and without 10% Pressure Drop * Pressure drop decreases conversion

  17. Reaction Network • Reactions are carried out in a catalytic FBR with temperatures ranging between 350-390°C • Acrolein is desired product • Major by-products9 • Water • CO and CO2 • Acetadehyde C3H6+ O2 C2H4O + H2O

  18. Rate Expressions

  19. Design 4 Assumptions • All Design 3 assumptions – 2830 kg/m3 is catalyst particle density10 • Tan et al. reaction kinetics representative9 • CO2 reaction rate independent of temperature

  20. Design 4: Multiple Reactions Reactor • Modified the reactor to include multiple reactions • Used approved reaction kinetics to calculate species flow rates V= 287.5 m3

  21. *Selectivity of acrolein increases with temperature

  22. Design 5 Assumptions • All Design 4 assumptions • 227 W/m2-K is heat transfer coefficient6 • Heat capacities are constant • Heats of reactions are constant • Coolant temperature is constant at 618.15 K6

  23. Design 5: Non-Isothermal Reactor with Energy Balances An energy balance across the reactor was introduced to further validate the model as a suitable representation of the actual reactor

  24. Design 5: Non-Isothermal Reactor with Energy Balance • Incorporated energy balance into reactor design • Compared isothermal reactor and reactor with constant coolant temperature The Effect of Coolant Temperature on Temperature Profile *Coolant temperature effects severity of hotspot V= 281.3 m3

  25. Reactor Gain • “Gain” measures the dynamic stability of the reactor • A “Gain”< 2 is desired

  26. Final Design Assumptions • The catalyst void fraction is 0.46 • Catalyst bulk density is 1698 kg/m3 for α-Bi2Mo3O1210 • The inlet pressure is 3 atm6 • The inlet temperature is 663.15 K9 • The coolant temperature is constant at 658.15 K6

  27. Final Design Specifications

  28. Temperature Profile of the Reactor

  29. Conclusions

  30. References • 1John J. McKetta. “Acrolein and Derivatives” Encyclopedia of Chemical Processing and Design. • 2Toxicological Profile for Acrolein, U.S. Department of Health and Human Service, Agency for Toxic Substance and Disease Registry (August 2007). • 3“Acrylic Acid and Derivatives.” Kirk-Othmer Encyclopedia of Chemical Technology. 4th Edition. • 4Chemical Database Property Constants. DIPPR Database [Online]. Available from Rowan Hall 3rd Floor Computer Lab. (Accessed on 1/26/08). • 5L. D. Krenzke and G. W. Keulks, The Catalytic Oxidation of Propylene: VIII. An Investigation of the Kinetics over Bi2Mo3O12,Bi2MoO6, and Bi3FeMo2O12. The Journal of Catalysis Volume 64 (1980) p. 295-302. • 6Dr. Concetta LaMarca • 7“Reaction Technology.” Kirk-Othmer Encyclopedia of Chemical Technology. 4th Edition. • 8Perry, Robert. Perry's Chemical Engineers' Handbook. 7th. New York: McGraw-Hill, 1997. • 9H.S. Tan, J. Downie, and D.W. Bacon, The Reaction Network for the Oxidation of Propylene Over a Bismuth Molybdate Catalyst, The Canadian Journal of Chemical Engineering Volume 67 (1989) p. 412-417. • 10Cerac Incorporated. “MSDS Search” 25 March 1994. Accessed: 8 April 2008. <http://asp.cerac.com/CatalogNet/default.aspx?p=msdsFile&msds=m000443.htm>

  31. Questions?

More Related