1 / 15

Focus

Focus. Presented by Deris Jeannette, CEO/designer at ClearDome Solar Thermal, LLC San Diego, CA, www.cleardomesolar.com . Building Integrated Solar Forced Air Heater (BISFA). Solar Forced Air Heating. First commercial panels made in 1960’s

Lucy
Télécharger la présentation

Focus

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Focus

  2. Presented by Deris Jeannette, CEO/designer atClearDome Solar Thermal, LLCSan Diego, CA, www.cleardomesolar.com Building Integrated Solar Forced Air Heater (BISFA)

  3. Solar Forced Air Heating • First commercial panels made in 1960’s • Highest efficiency (75-80%) of all domestic solar energy products • The most affordable active solar energy products per usable watt • The most economical and practical way to reduce annual utility bills by 50-75%

  4. Roof mount 8’ BISFA panel comes in 3 sizes: 4’, 6’, 8’ x 16” BISFA panels fit 16” standing seam metal roofs or install on sunlit south facing walls or roofs

  5. Awnings work just as well 8’ BISFA panel20w PV Can use fresh air outside air In warmer climates

  6. Always safe to use • No fuel to leak or cause fires • Non toxic-no air pollution • Reduces greenhouse gas

  7. ClearDome BISFA panels generate over 100 watts of heat energy per linear foot • Equals over 300 BTU per foot • 8’ panel generates 800+ peak watts or 2500 BTU per hour with little or no cost

  8. Extremely durable in all weather Custom formed 16 gauge aluminum frame Unbreakable 1/8” polycarbonate glazing 95% absorption, .05 emissive Ultra Black internal solar heat absorber

  9. 100 CFM fan sends air through panel • Two backside 4” vents • Cold in/hot out • Standard 12 volt, .6 amp, optional 110 volt fan • Optional 12 volt PV for off grid use

  10. $1 per BISFA watt vs $9 per PV watt Installed price • $980 for one 8’, 800 watt BISFA panel • $7,200 for an 800 watt PV array

  11. Number of panels per square feet • Each 8’ long BISFA panel heats 500 sq. ft • Assumes south facing, sunlit mount • 8’ ceilings, normal insulation • Designed for close proximity installation • For more space and heat, add more panels • Also heats RV’s mobile homes, boats

  12. Free solar heat outputTypical conventional heat reduction is 50-75% Incoming Cold Air Peak temperature rise • 4’ panel = +40 degrees F • 6’ panel = +50 degrees • 8’ panel = +60 degrees • Cloudy day heating less 80% 12 volt fan costs less than 20 cents per month

  13. Solar Thermal Storage • Insulated home interiors are ideal for storing daytime solar heating • All day heating is stored in walls & floor • Then released after sundown • Conventional heat only needed late at night,early morning • 3-5 deg. loss of 10-15 deg. gain by bedtime

  14. See our many other unique solar thermal products at www.cleardomesolar.com Contact Deris Jeannette 619/990-7977

More Related