1 / 51

Chapter 8

Chapter 8 Administering TCP/IP Objectives Understand basic concepts about TCP/IP Configure TCP/IP on Windows Server 2003 Troubleshoot TCP/IP and network connectivity using various utilities Administer Dynamic Host Configuration Protocol (DHCP) in Windows Server 2003 Understanding TCP/IP

Pat_Xavi
Télécharger la présentation

Chapter 8

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 8 Administering TCP/IP

  2. Objectives • Understand basic concepts about TCP/IP • Configure TCP/IP on Windows Server 2003 • Troubleshoot TCP/IP and network connectivity using various utilities • Administer Dynamic Host Configuration Protocol (DHCP) in Windows Server 2003

  3. Understanding TCP/IP • Transmission Control Protocol/Internet Protocol (TCP/IP) • Suite of protocols and utilities used for • Network communication • Troubleshooting on local networks and the Internet

  4. Understanding TCP/IP (Continued) • TCP/IP has become the most popular network protocol in use today, because • It is the protocol suite used for Internet-based communications • It is an open-standard, vendor-independent protocol • In Windows Server 2003 environments, Active Directory depends on TCP/IP and related services to function

  5. Four layers of the TCP/IP model

  6. The TCP/IP Protocol Stack • Transmission Control Protocol (TCP) • Operates at the transport layer • Responsible for the reliable transmission of data on a TCP/IP network • A connection-based protocol • User Datagram Protocol (UDP) • Functions at the transport layer • A connectionless protocol • Provides no guarantee of packet delivery • Provides speed advantages in the form of lower overhead

  7. The TCP/IP Protocol Stack (Continued) • Address Resolution Protocol (ARP) • Works at the Internet layer • Responsible for mapping IP addresses to hardware media access control (MAC) addresses • Every Windows Server 2003 computer has an ARP cache that stores both dynamic and static entries • Internet Control Message Protocol (ICMP) • Operates at the network layer • Used to exchange network status and error information between two hosts

  8. The TCP/IP Protocol Stack (Continued) • Internet Group Management Protocol (IGMP) • Operates at the network layer • Used to manage network and host information when a network application requires the use of multicasts to communicate • Internet Protocol (IP) • Operates at the Internet layer • Responsible for addressing and routing packets so that they are delivered to the correct host • A connectionless protocol

  9. The TCP/IP Protocol Stack (Continued) • IPv4 • The current version of IP • Uses a 32-bit addressing scheme • IP addresses are generally represented using dotted-decimal notation • For example: 192.168.1.1 • A subnet mask • Used to determine which portion of an address represents the network and which portion represents a unique host on that network

  10. Installing TCP/IP • TCP/IP is installed by default if • The network adapter is automatically detected during the installation of Windows Server 2003 • If TCP/IP is not installed during setup, it can be added afterward • Once TCP/IP has been installed, the network administrator can either • Manually configure addressing parameters, or • Implement dynamic addressing using DHCP

  11. Configuring TCP/IP on Windows Server 2003 Computers • All hosts on a TCP/IP network require • An IP address • A subnet mask • Options for configuring IP addresses on workstations and servers • Configure each one manually with a static IP address • Configure computers to obtain an IP address automatically • Requires a DHCP server on the network

  12. Configuring Static IP Addresses • The decision on whether to use a static or dynamic IP-addressing method is often a function of the size of the network • For each network card configured to use TCP/IP, you must configure • An IP address • A subnet mask • TCP/IP Properties dialog box • Can be used to configure an IP address and a subnet mask

  13. Manually Configuring TCP/IP Properties

  14. TCP/IP Options

  15. Configuring IP Addresses Dynamically • Dynamic IP addressing • Possible if there is a server on the network running DHCP • Advantages • Can eliminate some administrative problems associated with configuring static IP addresses, such as • The chance of human error • IP address duplication • A DHCP server is configured with a range of IP addresses that will be assigned to clients on the network

  16. Automatic Private IP Addressing • Automatic private IP addressing (APIPA) • Allows DHCP-enabled clients to assign themselves an IP address and subnet mask in the event that a DHCP server is unavailable • Provides a client with limited functionality on the network

  17. Configuring TCP/IP properties dynamically using DHCP

  18. Troubleshooting TCP/IP and Network Connectivity • TCP/IP comes with several command-line utilities that can be used to • Test network connectivity to make sure that computers can properly communicate over the network • Troubleshoot network connectivity problems

  19. Verifying TCP/IP Configurations • ipconfig command • Can be used to verify the addressing parameters assigned to a host • Several parameters can be used with this command • winipcfg command • Used by Windows 9x machines to display the TCP/IP configuration settings • Very similar to the ipconfig utility used in Windows NT/2000/XP and Windows Server 2003

  20. Ipconfig parameters

  21. Verifying TCP/IP Configurations (Continued) • Information displayed using ipconfig or winipcfg can assist in determining whether the computer is using the correct • IP address • Subnet mask • Default gateway configuration

  22. Verifying Network Connectivity • Windows Server 2003 provides a variety of TCP/IP utilities to troubleshoot connectivity problems • ping command • Tests network connectivity with other hosts on the network by sending ICMP packets to a remote computer and then listening for an echo reply from the remote host

  23. Ping parameters

  24. Verifying Network Connectivity (Continued) • tracert command • Displays all the routers a packet must pass through in the journey to the remote host • Helps a network administrator better understand the true nature of a TCP/IP network communication issue

  25. Verifying Network Connectivity (Continued) • pathping command • Combines the functions of both the ping and tracert commands • Sends echo request messages to each router between a source and destination host • Once complete, it • Computes results based on the packets returned from each router • Displays the degree of packet loss at each router • Can help a network administrator determine which routers are experiencing network problems or congestion

  26. Pathping parameters

  27. Verifying Network Connectivity (Continued) • route command • Used to view or modify the contents of a system’s local routing table

  28. Verifying Network Connectivity (Continued) • netdiag command • Can be used to diagnose and troubleshoot a variety of network connectivity problems • Some of the information provided includes • A list of installed hotfixes • IP address and DNS settings • Domain configuration information

  29. Administering DHCP in Windows Server 2003 • To implement automatic IP addressing for network systems • Install a DHCP service on at least one server on the network • Dynamic Host Configuration Protocol (DHCP) • Used to • Centralize the administration of IP addresses and other options • Eliminate the administrative overhead of statically assigning the information to each network host

  30. Administering DHCP in Windows Server 2003 (Continued) • A DHCP scope • A range of IP addresses configured on a DHCP server that can be handed out to network clients • When a client is configured to use DHCP, it receives • An IP address • A subnet mask • Any other options that may have been configured for the scope

  31. Administering DHCP in Windows Server 2003 (Continued) • A DHCP lease • An IP address that is assigned to a client from a DHCP server • A DHCP client attempts to lease an IP address in one of the following situations: • TCP/IP is installed and started for the first time • The client releases its IP address and attempts to renew another one • The client attempts to release a specific IP address and is denied

  32. Installing a DHCP Server • The DHCP server must be assigned • A static IP address • A subnet mask • A default gateway (if required on the network)

  33. Configuring DHCP Scopes • A DHCP scope • A range of IP addresses and associated settings that can be handed out to network clients configured to use automatic addressing • Configured using the DHCP MMC snap-in

  34. The DHCP MMC snap-in

  35. Configuring DHCP Scopes (Continued) • Guidelines for creating a DHCP scope • Each DHCP scope should include only unique addresses to avoid duplicate IP addresses being handed out on the network • Any IP addresses that have been statically assigned to clients should be excluded from a scope to avoid duplication • DHCP servers can be configured with multiple scopes to assign IP addresses to hosts on different subnets

  36. Configuring DHCP Scopes (Continued) • Scope options • Examples: default gateway, DNS server addresses • Must be configured before activating the scope • Client reservation • Reserves an IP address within the scope for a particular client so it is always reassigned the same address

  37. Configuring DHCP Scopes (Continued) • Superscope • Grouping of scopes created for multiple subnets on a physical network • Usually created to make the administration of multiple scopes easier

  38. Configuring DHCP Scopes (Continued) • Multicasting • Sending a message to a group of clients, but not all clients, using a single destination address • Uses a special range of IP addresses known as the Class D address range • DHCP servers in Windows Server 2003 can assign multicast addresses to clients as well as traditional unicast addresses

  39. Authorizing a DHCP Server • Authorizing a DHCP server in Active Directory • The last step in installing a DHCP server • Designed to increase security and stability on a network • Only those Windows Server 2003 and Windows 2000 DHCP servers that have been authorized by an administrator are permitted to lease IP addresses

  40. Using DHCP Options • Besides an IP address and a subnet mask, a range of DHCP options can be assigned to clients

  41. Using DHCP Options (Continued) • Scope options can be configured at three levels • Server level • Server options apply to all scopes configured on the DHCP server • Scope level • Scope options only apply to a specific scope and the clients that lease an IP address from that scope • Client level • Client options apply to the specified client reservation

  42. Configuring DHCP in a Routed Network • Options for implemented DHCP in a routed network • Install and configure a DHCP server on each subnet • Configure network routers to forward DHCP broadcast traffic

  43. Configuring DHCP in a Routed Network (Continued) • Configure a DHCP relay agent on each of the subnets • The DHCP relay agent included with Windows Server 2003 • Relays DHCP broadcast messages between DHCP clients and DHCP servers across a routed network • Configured using the Routing and Remote Access tool

  44. Routing and Remote Access console

  45. DHCP and DNS Integration • Dynamic DNS (DDNS) • Allows name servers and clients to automatically update the DNS database • Options for DNS registration • Dynamically update DNS A and PTR records only if requested by the DHCP clients • Selected by default • Always dynamically update DNS A and PTR records • Discard A and PTR records when lease is deleted • Dynamically update DNS A and PTR records for DHCP clients that do not request updates

  46. DHCP and DNS integration properties

  47. Maintaining DHCP Services • Ways to monitor DHCP servers • Periodically look at the Event Viewer system log for any DHCP-related events • Use DHCP audit logging • Enabled by default in the DHCP MMC snap-in • Forces the DHCP server to place detailed event logs in the DHCP database directory

  48. DHCP service activity log

  49. Summary (Continued) • TCP/IP consists of a suite of protocols that can be used to configure, manage, and troubleshoot network connectivity • The protocols include TCP, UDP, ARP, IP • All hosts on a TCP/IP network require an IP address and a subnet mask • A default gateway is needed to communicate outside of the local subnet • IP addresses can be assigned to a host • Statically • Dynamically by using a DHCP server

  50. Summary (Continued) • Several utilities, such as ipconfig and ping, can be used to verify and troubleshoot TCP/IP • Once the DHCP service is installed, you must • Create and activate a unique scope • Authorize the DHCP server in Active Directory • You can also add various scope options, such as the IP address of the default gateway

More Related