1 / 13

Mole balance for chemical reaction engineering (Design Equations for reactors)

Mole balance for chemical reaction engineering (Design Equations for reactors). Lec 4 week 5. Recall General Mole Balance. Batch reactor mole balance. Batch reactor. Batch Reactor. Continuous Stirred Tank Reactor (CSTR). CSTR. Tubular Reactor (Plug Flow Reactor) (PFR).

adair
Télécharger la présentation

Mole balance for chemical reaction engineering (Design Equations for reactors)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mole balance for chemical reaction engineering(Design Equations for reactors) Lec4 week 5

  2. Recall General Mole Balance

  3. Batch reactor mole balance

  4. Batch reactor

  5. Batch Reactor

  6. Continuous Stirred Tank Reactor (CSTR)

  7. CSTR

  8. Tubular Reactor (Plug Flow Reactor) (PFR) • In addition to the CSTR and batch reactors, another type of reactor commonly used in industry is the tubular reactor. It consists of a cylindrical pipe and is normally operated at steady state. • In the tubular reactor, the reactants are continually consumed as they flow down the length of the reactor. • In modeling the tubular reactor. We assume that the concentration varies continuously in the axial direction through the reactor.

  9. Tubular Reactor (Plug Flow Reactor) (PFR)

  10. Tubular Reactor (Plug Flow Reactor) (PFR)

  11. Tubular Reactor (Plug Flow Reactor) (PFR)

  12. Plug Flow Reactor Mole Balance PFR: The integral form is: This is the volume necessary to reduce the entering molar flow rate (mol/s) from FA0 to the exit molar flow rate of FA.

  13. Packed Bed Reactor PBR The integral form to find the catalyst weight is:

More Related