1 / 10

1.2 Measurements in Experiments

1.2 Measurements in Experiments. Chapter 1 Section 2 Part 2 – Accuracy, Precision & Significant Figures. Accuracy. Accuracy – The extent to w hich a reported measurement approaches the true value of the quantity measured.

aimon
Télécharger la présentation

1.2 Measurements in Experiments

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 1.2 Measurements in Experiments Chapter 1 Section 2 Part 2 – Accuracy, Precision & Significant Figures

  2. Accuracy • Accuracy – The extent to which a reported measurement approaches the true value of the quantity measured. • Closer to the middle of the bulls eye, the more accurate the measurement.

  3. Precision • Precision – The degree of exactness or refinement of a measurement. • How close are the measurements together.

  4. Accurate and Precise • It is possible for objects to be both accurate and precise of none. Accurate and Precise Not Accurate or Precise

  5. Significant Figures • Significant Figures – Those digits in a measurement that are know with certainty plus the first digit that is uncertain. • The measurement can not be more precise then the measuring device. • Example: I can not measure inches using the odometer in a car, even though an odometer measures length.

  6. Rules of Zeros for Sig Figs • Zeros between other nonzero digits are significant. • Example: 50.3 seconds (3 sig figs) • Zeros in front of nonzero digits are not significant. • Example: 0.0032 (2 sig figs) • Zeros that are at the end of a number and also to the right of the decimal are significant. • Example: 34.100 (5 sig figs)

  7. Rules (cont.) 4. Zeros at the end of a number but to the left of a decimal are significant if they have been measured or are the first estimated digit; otherwise, they are not significant. • Example: 1000 m (1 sig figs) 1000. m (4 sig figs)

  8. Addition and Subtraction Rule • The final answer should have the same number of digits to the right of the decimal as the measurement with the smallest number of digits to the right of the decimal. 97.3 + 5.85 103.15 → round off → 103.2

  9. Multiplication and Division Rule • The final answer has the same number of significant figures as the measurement having the smallest number of significant figures. 123 x 5.35 658.05 → round off → 658

  10. Practice Problems List how many significant figures are in each number. • 23.56 m • 20.044 sec • 0.0076 hz • 1000 kg • 1.00000 g • 10.40 m/s

More Related