1 / 5

MERCURY CONTROL DURING NATURAL GAS PROCESSING SHEQ problems and solutions Zdravko Špirić

MERCURY CONTROL DURING NATURAL GAS PROCESSING SHEQ problems and solutions Zdravko Špirić INA-Naftaplin, Zagreb, Croatia e-mail: zdravko.spiric@ina.hr. Boston , May 2, 200 2. INA-Naftaplin implemented a comprehensive technical approach to the control of mercury

albina
Télécharger la présentation

MERCURY CONTROL DURING NATURAL GAS PROCESSING SHEQ problems and solutions Zdravko Špirić

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MERCURY CONTROL DURING NATURAL GAS PROCESSING SHEQ problems and solutions Zdravko Špirić INA-Naftaplin, Zagreb, Croatia e-mail: zdravko.spiric@ina.hr Boston, May 2, 2002.

  2. INA-Naftaplin implemented a comprehensive technical approach to the control of mercury at Gas treatment processing plant (GTP) Molve. The program includes both fully effectivetechnologies for mercury removal from natural gas and the accurate measurement of mercury in the processes and environment within and surrounding the plant. IJS (Slovenia) GKSS – Galab (Germany) ERI (Sweden) St.Petersburg Univ. (FSU)

  3. THERE’S NEED FOR: • High-quality, useful and reliable equipment and accurate methods for liquidhydrocarbon samples collection pre-treatment, preservation, storage. • Simple, accurate and reliable test methods and instruments for on-line identification and precise (quantitative plus quantitative) determination of the mercury content in process streams and in the surrounding atmosphere. • CA & CQ protocols and procedures, calibration standards and certified reference materials. • Efficient and safe technological, environmental and commercial procedures to reduce mercury emissions (mercury removal, recycling, storage and handling). • A program for investigation and evaluation of contaminated regions and their decontamination. • Human health effects (mercury exposure and health impacts, toxicology, risk assessment). • Technological process, materials and equipment resistant to aggressive (corrosive) impact of mercury. Efficient and safe technological, environmental and commercial procedures to reduce mercury emissions (mercury detection, measurements, removal, recycling, storage and handling). This approach is critical to our understanding, control and optimization of existing processes, but also to planning strategies and decision making for further operations in the petroleum industry.

  4. WASTE GTP Molve III – block sheme • "ECOLOGICAL" paradox • concentration limits, - the allowable content in process plants amount to max. of 0.01 g/m3 (due to corrosion danger). • This is 5000 times more stringent than the maximum allowable limit for the working environment (50 g/m3).

  5. Our current interest is : • the determination of Hg in liquid hydrocarbons • (condensate - - crude oil) and its subsequent removal • 2) mercury contaminated adsorbent (sulfur impregnated • activated carbon) treatment/disposal • 3) EHSQ mercury problems • We would like: • to discus our experience and needs • To promote and establish further cooperation

More Related