1 / 6

Back-end overview (both analog and digital) for VLBI2010

Back-end overview (both analog and digital) for VLBI2010. East Coast Geodetic VLBI Meeting 23-24 Feb, 2011, Haystack Observatory Bill Petrachenko. Goals for the VLBI2010 back-end system. Handle VLBI2010 mode of observation 4 bands each using both linear polarizations

aldona
Télécharger la présentation

Back-end overview (both analog and digital) for VLBI2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Back-end overview (both analog and digital) for VLBI2010 East Coast Geodetic VLBI Meeting 23-24 Feb, 2011, Haystack Observatory Bill Petrachenko

  2. Goals for the VLBI2010 back-end system • Handle VLBI2010 mode of observation • 4 bands each using both linear polarizations • 1-GHz bandwidth per band • 2-14 GHz input frequency range • Achieve Optimum use of on-source time and record capability • Burst mode • Switch for routing to recorders • Handle multiple inputs, e.g. • More than one VLBI antenna on-site • Holography antenna • Reference antenna for antenna deformations and site ties

  3. VLBI2010 Back-end signal path block diagram Antenna inputs UV_512 V UH_512 UDC (2-14 GHz) RDBE Holography Reference Holography Reference LV_512 Ant1 Ant2 Ant1 Ant2 H LH_512 UV_512 V Burst Mode & Switch Recorder UH_512 1 2 3 4 1 2 3 4 UDC (2-14 GHz) RDBE H-switch V-switch LV_512 Recorder H LH_512 Recorder UV_512 V UH_512 UDC (2-14 GHz) RDBE Recorder LV_512 H LH_512 UV_512 V UH_512 UDC (2-14 GHz) RDBE To external processing e.g. GPS LV_512 H LH_512

  4. Notes on back-end features (1 of 2) • 4-to-1 switches on H- and V-inputs to allow automatic switching between, for example: • Two antennas (Ant1 and ant2) of a 2-antenna site where the antennas are never scheduled to observe simultaneously. • Reference antenna for determining antenna deformations and site ties • Holography antenna for measuring antenna surface. • Extra splitter outputs • For external processing, e.g. GPS. • Enhancements to UDC • 2-14 GHz frequency range • 2x anti-alias filtered V-output @ 512-MHz • 2x anti-alias filtered H-output @ 512-MHz

  5. Notes on back-end features (2 of 2) • Enhancements to RDBE • 2x V-input @ 512-MHz • 2x H-input @ 512-MHz • No gain-control? (already in UDC) • Burst mode processor and switch (needed to avoid inefficient use of media (see attached plot) • Max 32-Gbps input bandwidth, 8-Gbps from each RDBE • Max 16(32?)-Gbps output bandwidth, 4(8?)-Gbps to each of up to 4 record systems • Up to 30(?)-s record capacity at 32-Gbps input rate. • Simultaneous read and write capability

More Related