1 / 32

FLAP MAKERS

FLAP MAKERS. A Comparison of Flap Makers. Microkeratomes (Flap Makers). Flap makers have been around for 35+ years, previously used in ALK – Automated Lamellar Keratoplasty When they were used to produce a flap for LASIK, it was considered “off label” use of the Excimer.

alyn
Télécharger la présentation

FLAP MAKERS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FLAP MAKERS A Comparison of Flap Makers

  2. Microkeratomes(Flap Makers) • Flap makers have been around for 35+ years, previously used in ALK – Automated Lamellar Keratoplasty • When they were used to produce a flap for LASIK, it was considered “off label” use of the Excimer. • Now, LASIK has become the procedure of choice for most patients and surgeons. • The following slides will show how a flap makers produces a plano flap and the different flap makers you may encounter.

  3. What to look for in a Flap Maker • It should be easy to place onto the eye with no interference from the speculum • It should be easy to dissemble, clean, sterilize, and reassemble. • It should give consistent flap thickness results with low risk of : no partial flaps from motor failure no loss of suction • It should be easy to test- manually run the head back and forth, easily heard motors, etc.

  4. TYPES OF FLAPMAKERS • Movement Type- • Linear – Flap maker travels in the temporal to nasal direction. Hinge located nasally • Rotational – Flap maker travels in a circular direction. Superior hinge location most common, some small profile rings can have the hinge location anywhere. • Manual – Flap maker is driven across the cornea by pressure from the surgeon’s hand • Automated – Flap maker is driven by a motor, cable or gears • Femtosecond – Laser Produced Flap

  5. Most Commonly Used Flap Makers • Bausch & Lomb • Hansatome • AMO – Amadeus • Intralase • Femtosecond Laser • Moria • CB • CB Single Use • M2 • ONE use • LSK

  6. Other Commonly Used Flap Makers • Nidek • MK-2000 • BD Ophthalmic Systems • BD K-3000 • LaserSight – • Ultrashaper • ADM (Disposable)

  7. Mechanical Flap Makers The keratome flattens the cornea & the oscillating blade cuts a circular flap of tissue Produces X microns in flap = varies with each unit and with each plate thickness used. Flap thickness is determined by the gap between the blade & the footplate

  8. How to Determine What the Thickness Really Is? • If you have a mechanical flap maker and you want to determine the “real” thickness of the flap- you must measure pre op Pachymetry AND • Intra-operative Pachymetry – that means you take a Pachymetry reading in the bed before ablation… • Steps: • Measure Pre op Pachymetry • Measure after the flap is made – before ablation – bed Pachymetry • The difference is in the flap.. • Several measures should be made, then you can rely on that plate to cut systematically after that point.

  9. TYPES OF MICROKERATOMES

  10. Bausch and Lomb Hansatome → ← Bausch and Lomb ACS

  11. BAUSCH AND LOMB HANSATOME AND ACS • Hansatome - Automated, gear driven • Rotational travel, superior hinge • Z16, Z18 and Z20 depth plates • 8.5 mm or 9.5 mm ring and micro ring choices, flap diameter determined by K readings • ACS - automated, gear driven (no longer is production) • Linear travel, nasal hinge • Variable flap thickness, 130, 160 180 • These are getting harder and harder to find- they are becoming obsolete with time, but still considered a great flap maker

  12. Moria CBMoria OneUseMoria LSK

  13. Moria Microkeratomes • LSK One – nasal hinge, linear travel, manually driven, non-disposable • LSK One Use – nasal hinge, linear travel, manually driven, disposable head • CB Manual – superior hinge, rotational travel, manually driven, non-disposable • M2 Automated – Superior hinge, rotational travel, dual motor drive, non-disposable

  14. MORIA • Single power box runs most Moria Keratomes • Power source - Auto-electric, Gas Turbine • Flap Diameter - 8-11 mm determined by vacuum rings and K readings

  15. AMO- Amadeus Microkeratome

  16. AMO Amadeus • Automated, linear movement, nasal hinge • 140, 160 and 180 Depth Plates. • 8.5mm, 9.0mm and 9.5mm ring sizes, flap diameter determined by K readings. • LCD Touch Screen • No on eye assembly- One-handed. • Two motors for separate control of blade oscillation and movement across the cornea.

  17. Nidek

  18. NIDEK MK2000 • Linear travel, nasal hinge • Flap diameter 8.5mm, 9.5mm, 10.5mm • Flap thickness -130 um, 160um, 180um • Dual motors: • one controls blade oscillation speed 9000rpm • 2.0mm p/sec advancement

  19. EPITHELIAL FLAPMAKERS

  20. EPI FLAPMAKERS Creates a flap the thickness Of the Epithelium by cleaving Or separating the corneal layers To expose the Stroma

  21. Epi Flap Makers - Upside • Biomechanical flap risks of LASIK such as ectasia, striae, and dryness may not be amenable to further improvement • Biochemical healing risks of surface ablation are improving and may be more easily controlled • Scarring and irregular collagen formation improving with smoother laser treatments and more viable epithelial flap

  22. Epi Flap Makers - Downside • Thin and delicate flap is easily damaged if mis-handled • Metal cannula allows for flap positioning without adhering to the flap as an ocular sponge • Slow and wet technique seems to provide the most viable epithelium

  23. Epi Flap Maker Complications • Motor failure or mechanical interference- lashes in the way, speculum stopped the unit prematurely • Partial flaps • Loss or Decrease in Suction/Pressure: • Thin flaps • Button Hole flaps • Partial flaps • Caps

  24. Femtosecond Laser:Intralase

  25. Indications of Use (FDA) The INTRALASE® FS Laser is an ophthalmic surgical laser which produces resection of the cornea for the following indications : “creates flaps of user-selected diameter, thickness, hinge position and hinge width”.

  26. Femtosecond Laser • Surgical effect is achieved through “Photo disruption” at a molecular level • No thermal or shock wave transmission to surrounding tissues • Laser pulses focused to precise intrastromal locations (+ 5 microns) • Computer controlled optical delivery system places thousands of pulses next to each other creating flap incisions, lamellar resections, keratectomy

  27. Clinical Indications and Benefits of Femtosecond over Mechanical Keratectomy • High powers • Thin corneas (c less than 300 µ beds) • Variable corneal thickness • Anterior basement membrane disorders • Very small or large corneal diameters • Steep (over 47) or flat (under 42) corneas • Patient “fears” of blade or cutting

  28. IntraLASIK™ Instrumentation The disposable applanation cone is attached to the laser aperture.

  29. The disposable docking suction ring is positioned on the eye & suction applied IntraLASIK™ Patient Preparation

  30. The applanation cone is centered over the patients eye & ‘docked’ with suction ring IntraLASIK™ Patient Preparation

  31. IntraLase • Precision • Uniform flap thickness • ± 5 Microns (per Intralase Company) • Adjustable, precise flap diameters • Custom hinge location & width • Precise edge architecture • Adjustable angle • “Manhole cover”

  32. The End

More Related