1 / 19

CMOS Manufacturing Process

CMOS Manufacturing Process. CMOS Process. Circuit Under Design. This two-inverter circuit (of Figure 3.25 in the text) will be. manufactured in a twin-well process. Circuit Layout. Process Flow. These slides only present only a couple of snapshots of the .

ansel
Télécharger la présentation

CMOS Manufacturing Process

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CMOSManufacturingProcess

  2. CMOS Process

  3. Circuit Under Design This two-inverter circuit (of Figure 3.25 in the text) will be manufactured in a twin-well process.

  4. Circuit Layout

  5. Process Flow These slides only present only a couple of snapshots of the manufacturing process for the circuits presented in the textbook. For a complete overview of all 62 steps, please refer to: http://tanqueray.eecs.berkeley.edu/~ehab/inv.html. Credits for these pictures go to Ehab Hakeem, Prof. Andrew Neureuther and the Simpl program.

  6. Starting wafer: n-type with doping level = 10 13 3 /cm Start Material A A’ * Cross-sections will be shown along vertical line A-A’

  7. N-well Construction (1) Oxidize wafer (2) Deposit silicon nitride (3) Deposit photoresist

  8. N-well Construction (4) Expose resist using n-well mask

  9. N-well Construction (5) Develop resist (6) Etch nitride and (7) Grow thick oxide

  10. N-well Construction (8) Implant n-dopants (phosphorus) m (up to 1.5 m deep)

  11. P-well Construction Repeat previous steps

  12. Grow Gate Oxide 0.055 mm thin

  13. Grow Thick Field Oxide 0.9 mm thick Uses Active Area mask Is followed by threshold-adjusting implants

  14. Polysilicon layer

  15. Source-Drain Implants

  16. Source-Drain Implants

  17. Contact-Hole Definition (1) Deposit inter-level dielectric (SiO2) — 0.75 mm (2) Define contact opening using contact mask

  18. Aluminum-1 Layer Aluminum evaporated (0.8 mm thick) followed by other metal layers and glass

  19. Advanced Metalization

More Related