1 / 4

TMB firmware to try out this week

TMB firmware to try out this week. Version used at CERN: 11 Oct. 2007. New version = 1 May 2008. At 904, have checked that “basic” things work Can be loaded with CERN software TMB “self-check” stuff works (some things needed to be fixed…) Changes still needed for CERN software:

ardith
Télécharger la présentation

TMB firmware to try out this week

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TMB firmware to try out this week Version used at CERN: 11 Oct. 2007. New version = 1 May 2008 • At 904, have checked that “basic” things work • Can be loaded with CERN software • TMB “self-check” stuff works (some things needed to be fixed…) • Changes still needed for CERN software: • TMB Counters (have example code for counter readout) • Many VME registers have updated bits… need to update decoding and printout • New features  new xml parameters • clct_flush_delay • clct_write_continuous_enable • RPC readout timing fifo parameters (as for clct) • ALCT and CLCT bx0 delays • adjacent_cfeb_distance • CLCT throttle • change default of “clct_blanking” to 1. To set to 0, it requires alct-only or l1a-notmb mode enabled… (need to make software smart to not allow this…) • To be done in conjunction with a DMB firmware update… G. Rakness (UCLA)

  2. “Team A” for minus side: talk to stuff Thursday 8 May: Cooling + Low Voltage available • VCC (crate controllers) firmware updated on ALL peripheral crates to version 4.31. To make this happen… • Fiber module swaps • TMB replacement: • VME2/4, slot 20 (3872) • DMB replacement: • VME3/3, slot 21 (3873) • VCC replacements: • VME2/3 • VME2/6 • VME3/3 • VME4/1 G. Rakness (UCLA)

  3. “Team A”: Download firmware Focus has been on ME2, ME3, and ME4. Shift to ME1 tomorrow, since this is where we have gas and hard to access chambers/collaborators • “Team A” stuff (continued)… • Download TMB, ALCT, and RAT firmware (3881) • TMB broadcast within crate • ALCT serially with internal database check • No connection to ALCT ME3/1/18 (3896) • RAT broadcast firmware • RAT replacement: VME4/4 slot 4 • CFEB broadcast firmware software bug fixed (3899) • CFEB firmware broadcast to ME2, 3, and 4 (3907) • loose cables found and fixed… efficacy of fixes to be established… (3908) G. Rakness (UCLA)

  4. “Team A”: Next • To be done for minus side: • Change focus to ME1 • Load MPC and CCB firmware • Find communication phases • Gas, HV and Sector Processor working, then find L1As and DAVs G. Rakness (UCLA)

More Related