1 / 9

Quench thresholds for the MB and MQ using the code QP3 Arjan Verweij, TE-MPE

Quench thresholds for the MB and MQ using the code QP3 Arjan Verweij, TE-MPE. Modeling the geometry.

arlene
Télécharger la présentation

Quench thresholds for the MB and MQ using the code QP3 Arjan Verweij, TE-MPE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Quench thresholds for the MB and MQ using the code QP3 Arjan Verweij, TE-MPE Verweij, TE-MPE. 26 Nov 2010, MPP meeting

  2. Modeling the geometry Considering the high contact resistance between the strands in a Rutherford cable, the response of the superconductor due to a beam loss stretching over several meters can be modeled by a single strand with a length of half the cable transposition pitch, and symmetry lines at both ends. 15.1 mm Half pitch, LP/2 Verweij, TE-MPE. 26 Nov 2010, MPP meeting

  3. MB, midplane, inner layer Variations over the cable width Verweij, TE-MPE. 26 Nov 2010, MPP meeting

  4. Results Calculations performed for: - beam dissipation distribution taken from note 422. - the midplane inner layer cable of the MB and MQ magnets. - 18 pulse lengths, from 10 ms to 84 s, including the 12 integration times used for the BLM’s. - 5 currents, corresponding to 0.45, 2, 3.5, 5, 7 TeV. Results given for: - Energy vs pulse duration - Power vs pulse duration both averaged over the width of the conductor. Verweij, TE-MPE. 26 Nov 2010, MPP meeting

  5. Verweij, TE-MPE. 26 Nov 2010, MPP meeting

  6. Verweij, TE-MPE. 26 Nov 2010, MPP meeting

  7. Verweij, TE-MPE. 26 Nov 2010, MPP meeting

  8. Verweij, TE-MPE. 26 Nov 2010, MPP meeting

  9. Next magnets: D3 & D4: do we have realistic beam loss distribution or do we use the same as MB and MQ ? and/or: MB and MQ with different beam loss distribution Verweij, TE-MPE. 26 Nov 2010, MPP meeting

More Related