1 / 43

Solutions

Solutions. We carry out many reactions in solutions Remember that in the liquid state molecules move much easier than in the solid, hence the mixing of reactants occurs faster. Solute is the substance which we dissolve Solvent is the substance in which we dissolve the solute

artemas
Télécharger la présentation

Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Solutions • We carry out many reactions in solutions • Remember that in the liquid state molecules move much easier than in the solid, hence the mixing of reactants occurs faster • Solute is the substance which we dissolve • Solvent is the substance in which we dissolve the solute • In aqueous solutions, the solvent is water

  2. Concentration of Solutions • The concentration of a solution defines the amount of solute dissolved in the solvent • We will express the concentration of a solution in one of the two most common ways: • percent by mass • molarity

  3. Percent by mass of solute • What does it tell us? • The mass of solute in 100 mass units of solution • usually expressed as “% w/w”

  4. Example 1 • What is the concentration of the solution obtained by dissolving 25 g of NaOH in 300.0 mL of water?

  5. Example 2 • What mass of NaOH is required to prepare 250.0 g of solution that is 8.00% w/w NaOH?

  6. Example 3 • Calculate the mass of 8.00% w/w NaOH solution that contains 32.0 g of NaOH.

  7. Example 4 • What volume of 12.0% KOH contains 40.0 g of KOH? The density of the solution is 1.11 g/mL.

  8. Molarity, or Molar Concentration • Always divide the number of moles of the solute by the volume of the solution, not by the volume of the solvent

  9. Example 5 • Calculate the molarity of a solution that contains 12.5 g of sulfuric acid in 1.75 L of solution.

  10. Example 6 • Determine the mass of calcium nitrate required to prepare 3.50 L of 0.800 M Ca(NO3)2. • We first find the number of moles of Ca(NO3)2 dissolved in the solution:

  11. Example 6 • Now we calculate the molar mass of Ca(NO3)2 and find its mass in grams necessary for preparation of the solution:

  12. Dilution of Solutions • Solution 1: concentration = M1 volume = V1 • We add more solvent (dilute the solution) concentration = M2 volume = V2 • The amount of solute remains the same (we didn’t add any solute to the solution)

  13. Dilution of Solutions • If we know any 3 of these 4 quantities, we can calculate the other one • The relationship is appropriate for dilutions but not for chemical reactions

  14. Example 7 • If 10.0 mL of 12.0 M HCl is added to enough water to give 100. mL of solution, what is the concentration of the solution?

  15. Example 8 • What volume of 18.0 M sulfuric acid is required to make 2.50 L of a 2.40 M sulfuric acid solution? • V1 = ? • M1 = 18.0 M • V2 = 2.50 L • M2 = 2.40 M V1 18.0 M = 2.50 L  2.40 M V1 = 0.333 L

  16. Using Solutions in Chemical Reactions • Combine the concepts of molarity and stoichiometry to determine the amounts of reactants and products involved in reactions in solution.

  17. Example 9 • What volume of 0.500 M BaCl2 is required to completely react with 4.32 g of Na2SO4?

  18. Example 10 • What volume of 0.200 M NaOH will react with 50.0 mL of 0.200 M aluminum nitrate, Al(NO3)3? What mass of Al(OH)3 will precipitate? 3NaOH + Al(NO3)3 3NaNO3 + Al(OH)3 • First we calculate the number of moles of Al(NO3)3 (remember to convert mL to L):

  19. Example 10 (continued) • From the equation we see that each mole of Al(NO3)3 reacts with 3 moles of NaOH. Therefore, we multiply the number of moles of Al(NO3)3 by 3 to find the number of moles of NaOH required for the reaction: # moles (NaOH) = 0.0300 mol • Now we again use the formula for the molarity to find the volume of the NaOH solution reacting: V(solution) = 0.150 L = 150 mL

  20. Example 10 (continued) • Each mole of Al(NO3)3 produces 1 mole of Al(OH)3. Since the reacting solution contains 0.0100 mole of Al(NO3)3, 0.0100 mole of Al(OH)3 will be formed: m(Al(OH)3) = #moles(Al(OH)3)  Mr(Al(OH)3) m(Al(OH)3) = 0.0100 mol  78.00 g/mol = 0.780 g V(solution) = 0.150 L = 150 mL

  21. Example 11 • What is the molarity of a KOH solution if 38.7 mL of the KOH solution is required to react with 43.2 mL of 0.223 M HCl? KOH + HCl  KCl + H2O • First we calculate the number of moles of HCl in the solution (remember to convert mL to L):

  22. Example 11 (continued) KOH + HCl  KCl + H2O • From the equation we see that each mole of HCl reacts with 1 mole of KOH. Therefore, 9.63·10-3 mole of HCl will react with 9.63·10-3 mole of KOH. • Now we can use the formula for the molarity:

  23. Example 12 • What is the molarity of a barium hydroxide solution if 44.1 mL of 0.103 M HCl is required to react with 38.3 mL of the Ba(OH)2 solution?

  24. Stair step function on periodic table separates metals from nonmetals. Metals are to the left of the stair step Nonmetals are to the right of the stair step Metals and Nonmetals

  25. Metals and Nonmetals • Periodic trends in metallic character

  26. Metals tend to form cations Li1+, Ca2+, Ni2+, Al3+ Nonmetals tend to form anions or oxoanions Cl1-, O2-, P3- ClO41-, NO31-, CO32-, SO42-, PO43- Important exceptions: H1+, NH41+ Metals and Nonmetals

  27. Aqueous Solutions • Classification of solutes: • Electrolytes – solutes whose aqueous solutions conduct electricity • Nonelectrolytes – solutes whose aqueous solutions do not conduct electricity

  28. Nonelectrolytes • Exist in solution in form of electroneutral molecules • No species present which could conduct electricity • Some examples: • H2O, C2H5OH, CH3COOH

  29. Electrolytes • Exist in solution as charged ions (both positive and negative) • Ions move in the electric field and the solution conducts electricity Electrolytes Acids Salts Bases

  30. Electrolytes • Acids • Form H+ cations in aqueous solution • HCl, H2SO4, H3PO4 • Bases • Form OH- anions in aqueous solution • NaOH, Ca(OH)2 • Salts: • Form ions other than H+ or OH- in aqueous solution • NaCl, MgBr2, Zn(NO3)2

  31. Electrolytes • Dissociation • The process in which a solid ionic compound separates into its ions in solution NaCl(s)  Na+(aq) + Cl-(ag) • Ionization • The process in which a molecular compound separates to form ions in solution HCl(g)  H+(aq) + Cl-(ag) H2O H2O

  32. Strong Electrolytes • Strong electrolytes • Dissociate completely in aqueous solution • Good electric conductors in solution • Examples: • Strong acids (Table 4-5) HCl, HNO3, H2SO4 • Strong bases (Table 4-7) KOH, Ba(OH)2 • Soluble ionic salts (Solubility Chart) KI, Pb(NO3)2, Na3PO4

  33. Weak Electrolytes • Weak electrolytes • Dissociate partially in aqueous solution • Poor electric conductors in solution • Examples: • Weak acids (Table 4-6) HF, CH3COOH, H2CO3, H3PO4 • Weak bases NH3, CH3NH2 • Dissociation of weak electrolytes is reversible

  34. Reversible Reactions • All weak acids and bases ionize reversibly in aqueous solution • This is why they ionize less than 100% • CH3COOH – acetic acid CH3COOH CH3COO-(aq) + H+(aq) • NH3 – ammonia NH3 + H2O NH4+(aq) + OH-(aq) H2O

  35. How to Write Ionic Equations • Write the formula unit equation: Pb(NO3)2 + 2KI  PbI2 + 2KNO3 • Show dissociation for every strong electrolyte (total ionic equation): [Pb2+(aq) + 2NO3-(aq)] + [2K+(aq) + 2I-(aq)]   PbI2(s) + [2K+(aq) + 2NO3-(aq)] • To obtain tne net ionic equation, get rid of spectator ions: Pb2+(aq) + 2I-(aq)  PbI2(s)

  36. Ionic Equations: Examples • Zn + CuSO4 ZnSO4 + Cu • NaOH + CH3COOH  CH3COONa + H2O

  37. Combination Reactions • One or more substances react to form one new substance (compound) • Element + Element  Compound 2Na(s) + Br2(l)  2NaBr(s) P4(s) + 10Cl2(g)  4PCl5(s) • Compound + Element  Compound C2H4(g) + Cl2(g)  C2H4Cl2(l) • Compound + Compound  Compound CaO(s) + CO2(g)  CaCO3(s)

  38. Decomposition Reactions • A compound decomposes to produce two or more substances • Compound  Element + Element 2HgO(s)  2Hg(l) + O2(g) 2H2O(l)  2H2(g) + O2(g) • Compound  Compound + Element 2KClO3(s)  2KCl(s) + 3O2(g) • Compound  Compound + Compound Mg(OH)2(s)  MgO(s) + H2O(g) heat electrolysis heat heat

  39. Displacement Reactions • One element displaces another from a compound • Zn(s) + CuSO4(aq)  ZnSO4(aq) + Cu(s) • Zn(s) + H2SO4(aq)  ZnSO4(aq) + H2(g) • 2K(s) + 2H2O(l)  2KOH(aq) + H2(g)

  40. Metathesis Reactions • Exchange of ions between two compounds • General equation: • AX + BY AY + BX • Need a driving force in order to proceed • Such driving force should act to remove ions from the solution

  41. Metathesis Reactions • Formation of a nonelectrolyte • Acid-Base neutralization – most typical NaOH(aq) + HCl(aq)  NaCl(aq) + H2O(l) • Formation of an insoluble compound • Precipitation Pb(NO3)2(aq) + 2KI(aq)  PbI2(s) + 2KNO3(aq) • Gas evolution CaCO3(aq) + 2HCl(aq)  CaCl2(aq) + H2O(l) + CO2(g)

  42. Reading Assignment • Read Sections 4-1 through 4-3 and 4-8 through 4-11 • Get familiar with information presented in Sections 4-5 and 4-6 • Take a look at Lecture 6 notes (will be posted on the web 9/14) • Read Sections 5-1 through 5-13

  43. Homework #2 • Required: OWL Homework Problems based on Chapters 3 & 4 due by 9/26/05, 9:00 p.m. • Optional: OWL Tutors and Exercises Textbook problems (see course website)

More Related