4 DIY Methods To Get Rid Of A Car Dent Without Harming The Paint

1. 4 DIY Methods To Get Rid Of A Car Dent Without Harming The Paint Cars today are turning into magnets for dents! Whether it’s a minor bump in the parking lot or getting scratched by other vehicles during peak traffic hours, dings and dents are inevitable. So, in case, you’ve recently got a dent on your car, it’s best to run to the nearest car body shop and get it a fix. However, if you’re in need of a quick fix then before you find the reliable automobile body shop, there are few DIY tips to get rid of your car dent without hindering paint. Note: Not all of the given methods may work with your vehicle; so, in case, you’re determined to do a DIY Paintless dent removal take the assistance of a car technical expert to prevent further damage to your car. 1: Boiling Water Works One of the easiest ways to fix a car dent is reversing it back; however, for your bumpers made of plastic, it is normally difficult to pop the dent back as the plastic is stiff. To solve this issue, pour boiling water on the dented part, and soon after try and pop the dent back in. The heated water will loosen the plastic and make the endeavor simpler; nonetheless, ensure that you don’t put excess pressure on the dent to damage its original shape. For a better finish, take it to a trusted car body shop and make the car look brand new. 2: Dry Ice for Minor Dents Imagine this scenario, your brand-new sedan was hit by a careless shopping cart, and now it has a little dent. Not to worry, the little dents can easily be fixed using dry ice. Wear a pair of protective gloves and rub dry ice over the little dent as many times as required. For better results, heat up the dent with a hair dryer and rub dry ice over it until you hear the dent popping back. 3: Wooden Dowels, Hot Glue, and a Few Screws Another interesting way to get rid of dents is using a wooden dowel, screws and enough hot glue. Take the screws and attach them into the side of the dowels. Now, place the hot glue at the bottom of the dowels and fix them over the dented area of your car. Wait for a while and as then pull out the dowels from the car until the dent is gone. To remove residue glue from the car use heat with a little alcohol and clean it up. Now, this method is safe and doesn’t leave many chances of damage to the car. 4: Compressed Air and Hairdryer Works Too Another safe and easy way to eliminate minor dents without hindering car paint is using a dryer and compacted air. First, switch the hair dryer to the highest temperature and heat

2. the plastic of the car dent. Now, place the compressed air can above the dent and heat that specified area once more. The cold air will result in the plastic contracting and thereby, the dent will pop out. Well, there you go, 4 easy DIY ways to get your car dent removed without demolishing the paint. Nevertheless, if the methods seem complicated then you can always run to your trusted car body shop to get your Paintless Dent Repair service.