1 / 12

Campaign integrated dust and erosion – EAST

ASIPP. EAST. Campaign integrated dust and erosion – EAST. J.S Hu, J.G Li and EAST team hujs@ipp.ac.cn Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031, China. Sept. 15-18, 11 th ITPA-SOL/DIV meeting, N agasaki , Japan. ASIPP. EAST. Outline. Introduction

autumn-tate
Télécharger la présentation

Campaign integrated dust and erosion – EAST

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ASIPP EAST Campaign integrated dust and erosion – EAST J.S Hu, J.G Li and EAST team hujs@ipp.ac.cn Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031, China Sept. 15-18, 11th ITPA-SOL/DIV meeting, Nagasaki, Japan

  2. ASIPP EAST Outline • Introduction • Erosions/Depositions • Dust • summary

  3. ASIPP EAST Plasma operation in 2008 campaign • New carbon Plasma facing components • Shots number:#5132-9382, total 4250 shots; • Configurations: Limiter & Divertor with single/Double null; • Main parameters of plasma: • Bt~8.0KA; • Max. LHCD power: 800kW; • max. ICRF power: 260kW; • Max. Plasma current: 600kA; • Normal Plasma density: 1~4x1019/cm3. • Long plasmas • ~20S, 250kA, ne~0.8x1019/cm3, 400kW(LHCD) • ~10S, 400kA, ne~1.5x1019/cm3, 400kW(LHCD)

  4. Full C PFC (-2010) 2 MW/m2 W/Cu diverter(-2014), 10MW/m2 Full W PFC (-2016) RF wall conditioning techniques in divertor devices (cleaning, isotopic control, boronization). Develop Tritium removal techniques that could be applicable to ITER. Steady-state erosion, redeposition and dust formation. In-situ control of T-codeposition and inventory by surface temperature control. EAST ASIPP Main PSI issues for near futureProviding Useful Information for ITER

  5. ASIPP EAST Dust during plasma discharges • In many shots, dusts were observed by CCD camera due to unfavorable position control. #7097 #6599 #5674

  6. ASIPP EAST Erosion/Deposits on walls deposition on some tiles erosion on some tiles

  7. ASIPP EAST Dust location • SOL zones at low field side • Both side of movable limiters • Near GDC anodes • On/near ICRF antenna for wall conditioning • On/near coils box for fast control • …… • Window tubes • In the gaps

  8. ASIPP EAST Dust on/near ICRF antenna

  9. ASIPP EAST Dust on both sides of movable limiters

  10. ASIPP EAST Dust near GDC anodes Dust

  11. ASIPP EAST Dust on/near coil box

  12. ASIPP EAST Dust integration and summary • Erosion seemed on the wall at high field side and movable limiters due to the lose of position control. • Most dust in tile gaps, SOL zones at low field sides, windows tubes… • Total collected dust was 4.05g. • ~1mg/shot.

More Related