1 / 2

CONCLUSION ON CABLES FOR 280 MBITS/S

CONCLUSION ON CABLES FOR 280 MBITS/S. SPD cables: 24-25 m length: receiver side simple termination. Compensation on driver side (R+L) Use of 3.3->3.6 Volts +/or pull up current to increase signal margin (165mv-> 200 mv)

babu
Télécharger la présentation

CONCLUSION ON CABLES FOR 280 MBITS/S

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CONCLUSION ON CABLES FOR 280 MBITS/S SPD cables: 24-25 m length: receiver side simple termination. Compensation on driver side (R+L) Use of 3.3->3.6 Volts +/or pull up current to increase signal margin (165mv-> 200 mv) To control skew : first choice, Cat5 rigid; 100 m cut in 4 “identical 25m cables”. Or cat 6 cut in middle but problems at the end-> add short patch cables (8 euros each?). Anyhow problem on FE side Drawing of solution needed=> Orsay? (information sent from Orsay to David on 13/12/03 ) Upper SPD cables shorter => Annecy defines minimum length? If possible is it better to make them shorter by exactly 50ns?(about 11meter) Smaller compensation but still skew problem=> 4 cables identical or cut each cable in half and cross. Jacques Lefrancois

  2. Trigger cables: Between crates of one rack: length 1-2 meter => use standard patch cables Cat 5 may have too much skew => characterize cat6 commercial patch cables. (Orsay+ Barcelona or Clermont?) Between two racks; calculate length (<4m?) Is cat 6 patch cables OK ? Between HCAL and ECAL about 10 meters probably some “small” compensation receiver side (validation card) Skew compensation by cutting and reconnecting cable probably needed Jacques Lefrancois

More Related