4 Tips for Preventing a Rusting Water Heater

1. 4 TIPS FOR PREVENTING A RUSTING WATER HEATER INSTALL A CORROSION-RESISTANT ANODE ROD An anode rod is a sacrificial component that attracts corrosive elements in the water, preventing them from attacking the tank. Magnesium or aluminum anode rods are commonly used for this purpose. Regularly inspect and replace the anode rod as needed, typically every 2-5 years, depending on the water quality. FLUSH THE TANK ANNUALLY Sediment buildup in the bottom of the tank can accelerate corrosion. Regularly flush the tank to remove sediment and prevent it from settling. Follow the manufacturer's guidelines for flushing, which typically involves attaching a hose to the drain valve and allowing water to flow through until it runs clear. USE A WATER SOFTENER Hard water, which contains high levels of minerals like calcium and magnesium, can contribute to corrosion. Consider installing a water softener to reduce the hardness of the water entering the heater. This can help prevent mineral buildup and decrease the likelihood of rusting. Contact us at - 647-952-6629 for affordable water heaters in Fergus. MAINTAIN A CONSISTENT TEMPERATURE Drastic temperature changes within the tank can contribute to the development of condensation, which can lead to corrosion. Keep the water heater at a consistent temperature, typically around 120°F (49°C). Avoid setting the temperature too high, as it can not only contribute to corrosion but also increase energy consumption.