1 / 25

AP Physics Chapter 3 Motion in Two Dimensions

AP Physics Chapter 3 Motion in Two Dimensions. Chapter 3: Motion in Two Dimensions. 3.1 Components of Motion 3.2 Vector Addition and Subtraction 3.3 Relative Velocity 3.4 Projectile Motion. Learning Objectives for Chapter 3.

benjaminlouis
Télécharger la présentation

AP Physics Chapter 3 Motion in Two Dimensions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AP Physics Chapter 3Motion in Two Dimensions

  2. Chapter 3: Motion in Two Dimensions 3.1 Components of Motion 3.2 Vector Addition and Subtraction 3.3 Relative Velocity 3.4 Projectile Motion

  3. Learning Objectives for Chapter 3 • Students should be able to add, subtract, and resolve displacement and velocity vectors so they can: 1. Determine components of a vector along two specified, mutually perpendicular axes. 2. Determine the net displacement of a particle or the location of a particle relative to another. 3. Determine the change in velocity of a particle or the velocity of one particle relative to another.

  4. Warmup: Read each line aloud without making any mistakes. If you make a mistake you MUST start again without going any further. This is this puzzleThis is is puzzleThis is how puzzleThis is to puzzleThis is keep puzzleThis is a puzzleThis is student puzzleThis is busy puzzleThis is for puzzleThis is forty puzzleThis is seconds! puzzle Now go back and read the THIRD word in each line from the top. http://www.brainbashers.com

  5. 3.1 Components of Motion Vectors are drawn as arrows on the coordinate plane. - the length of the arrow corresponds to the magnitude - the vector points to its direction N Vector A has a magnitude of 3 meters and a direction of 60°above the positive x-axis. W E y 90° A S 3.0 m 3.0 m B Vector B has a magnitude of 3 meters and a direction of β° above the negative x-axis. 60° β x 0° 180° 1.5 m C 270° Vector C has a magnitude of 1.5 meters and a direction of 270°.

  6. 3.1 Components of Motion • To analyze motion, a vector can be broken down into x- and y- components. y Given a vector v with a magnitude of a directed an angle Ө above the horizontal vx = a cos Ө vy = a sin Ө 5 units y- component Ө = 53° x example: Find the components of v if its magnitude is 5 units and Ө = 53°. vx = a cos Ө = 5 cos 53° = 3 units vy = a sin Ө = 5 sin 53° = 4 units x- component Note: The magnitude of the vector v is v = √ vx2 + vy2Why?

  7. 3.1 Components of Motion • Kinematics problems in two-dimensions can be solved by: • resolving the displacement, velocity, and acceleration vectors into their respective components. • using the three constant acceleration equations separately for the x and y directions. • using the Pythagorean theorem to find the magnitude of your resultant vector. • using an inverse trig function to find the angle of your resultant vector

  8. 3.1 Components of Motion Example 1: A boat travels with a speed of 5.0 m/s in a straight path on a still lake. Suddenly, a steady wind pushes the boat perpendicularly to its straight line path with a speed of 3.0 m/s for 5.0 s. Relative to its position just when the wind started to blow, where is the boat at the end of this time? Solution: List givens for x and y directions separately. x-direction y-direction Unknowns: x and y vo = 5.0 m/s vo = 3.0 m/s a = 0 a = 0 Common to both: t = 5.0 s Analysis: Both motions are motion with constant velocity. Choose the straight path of the boat as the x axis and the direction of the wind as the y axis. Sketch: wind y d x Ө boat

  9. x-direction y-direction Unknowns: x and y vo = 5.0 m/s vo = 3.0 m/s a = 0 a = 0 Common to both: t = 5.0 s x-component: (use equation 1) x = vot + ½ at2 = (5.0 m/s)(5.0 s) + 0 = 25 m y-component: (use equation 1) y = vot + ½ at2 = (3.0 m/s)(5.0 s) + 0 = 15 m Now, d = √ x2 + y2 = √ (25 m)2 + (15 m)2 = 29 m And Ө = tan-1 y = 15m = 31° 25 m wind y d x Ө boat

  10. 3.2 Vector Addition and Subtraction vector addition – combining vector quantities by using one of several techniques • geometric methods (triangle, parallelogram, polygon) • vector components and the analytical component method vector subtraction – a special case of vector addition • A - B = A + (-B) • subtracting a vector is the same as adding a negative vector resultant – the overall effect of combining vectors; the vector sum Example: Add vectors A + B + C = R Solution: Use tip-to-tail method

  11. SCALE: 1 cm = 5 m 3.2 Vector Addition and Subtraction • Geometric (Graphical) Methods • use a convenient scale (ex: 1 cm = 10 meters) • To add vectors A and B, draw them tip-to-tail, starting at the origin. • The vector that extends from the tail of A to the tip of B, completing the triangle, is the resultant R = A + B. • When drawn to scale, the magnitude of R can be found by measuring R and using the scale conversion. • Use a protractor to measure the direction of the resultant, ӨR. • You may add on as many vectors as you like; the order doesn’t matter! • Example: Add three vectors graphically. Solution:

  12. SCALE: 1 cm = 5 m 3.2 Vector Addition and Subtraction • Analytical (Trigonometry) Method • When vectors make a right triangle with each other, • use the Pythagorean theorem to find the magnitude of your resultant vector. • use the inverse trig function to find the angle of your resultant vector. A = side adjacent to angle Ө O = side opposite to angle ӨSOH – CAH - TOA H = hypotenuse of triangle sin Ө = O cos Ө = A tan Ө = O A H A Ө = sin-1OӨ = cos-1AӨ = tan-1O A H A H O Ө A

  13. 3.2 Vector Addition and Subtraction Example: Eric leaves the base camp and hikes 11 km, north and then hikes 11 km east. Determine Eric's resulting displacement and express in the magnitude-angle form. Solution: Magnitude of displacement = 16 km

  14. 3.2 Vector Addition and Subtraction

  15. 3.2 Vector Addition and Subtraction

  16. 3.2 Vector Addition and Subtraction • Analytical Component Method • Resolve the vectors to be added into their x and y components. Include directional signs (plus or minus) in the components. • 2. Add, algebraically, all the x- components together and all the y- components together to get the x and y components of the resultant vector. • 3. Express the resulting vector using • The component form using unit vectors , e.g. A = Axx + Ayyor • In the magnitude-angle form, e.g., A = √Ax2 + Ay2, Ө = tan-1Ay • Ax unit vector – has a magnitude of one and no units. It indicates a vector’s direction only. ex: R = (11 km) x + (11 km) y 11 km, E R 11 km, N

  17. Example: Find the resultant velocity of the sum of v1 = 35 m/s 30° N of E, and v2 = 55 m/s 45° N of W Solution: 1. Resolve the vectors to be added into their x and y components. v1x = v1 cos 30°= (35 m/s) cos 30°= 30.3 m/s v1y = (35 m/s) sin 30°= 17.5 m/s v2x = -v2 cos 45°= (55 m/s) cos 45°= -38.9 m/s, (-x direction) v2y = (55 m/s) sin 45°= 38.9 m/s 2. Add components: vx = v1x + v2x = 30.3 m/s + (-38.9 m/s) = -8.6 m/s vy = v1y + v2y= 17.5 m/s + 38.9 m/s = 56.4 m/s 3. Express the resultant vector. In component form: v = -8.6 m/s x + 56 m/s y In magnitude-angle form: v = √vx2 + vy2, = √(-8.6 m/s)2 + (56.4 m/s)2 = 57 m/s and Ө = tan-1vy = tan-156.4 m/s = 81° N of W vx -8.6 m/s N v2 v1 45° 30° E W N v 56.4 m/s 81° E W -8.6 m/s

  18. Check for Understanding • Fill in the blanks using the word bank. • magnitude-angle component tip-to-tail trigonometry kinematic components • To analyze motion in two dimension, quantities are usually resolved into rectangular _________________. • Once displacement, velocity, and acceleration vectors are resolved into their respective components, we can apply ___________________equations. • Vectors may be added graphically using the ___________________method. • If your vectors are at right angles, you may use the _____________ method. • After breaking vectors down into their components, you may perform vector addition by using the analytical __________________method. • Two ways to express the resultant vector is the _______________ form and the component form.

  19. Check for Understanding • Fill in the blanks using the word bank. • magnitude-angle component tip-to-tail trigonometry kinematic components • To analyze motion in two dimension, quantities are usually resolved into rectangular components. • Once displacement, velocity, and acceleration vectors are resolved into their respective components, we can apply kinematic equations. • Vectors may be added graphically using the tip-to-tail method. • If your vectors are at right angles, you may use the trigonometry method. • After breaking vectors down into their components, you may perform vector addition by using the analytical component method. • Two ways to express the resultant vector is the magnitude-angle formand the component form.

  20. Warmup: Decipher each language equation. • 1. 1 = E on C • One Eye on a Cyclops • 2. 1 = G. L. for M. • One Giant Leap for Mankind • 3. 1 = K.K on the E.S.B • One King Kong on the Empire State Building • 4. 1 = S.C. in D.P. • One Single Calorie in Diet Pepsi • 5. 1 = S. S. • One Singular Sensation • 6. 1 = T. that O.K • One Time that Opportunity Knocks • 7. 1 = W. on a U. • Wheel on a Unicycle • 8. 1 = if by L. • One if by Land

  21. 3.3 Relative Velocity • “Everything is relative…” • Physical phenomena can be observed from different frames of reference. ex: The velocity of a ball tossed by a passenger in a moving car will be measured differently by a passenger on the car than by an observer on Earth. • Your reference is the origin, or zero point, of your coordinate system. • Any velocity we measure is relative. ex: The velocity of a moving car is measured relative to the ground. ex: The revolving motion of the Earth around the Sun is relative to the Sun. ex: moving sidewalk in an airport • Relative velocity can be determined with vector addition or subtraction. • Standard symbols are used to represent relative velocity. ex: vcg (where c stands for car and g stand for ground) means the velocity of a car relative to the ground.

  22. 3.3 Relative Velocity • • When velocities are along a straight line in the same or opposite direction and all have the same reference, we can find relative velocities by vector subtraction. • vAB = vA– vB • vAB = - vBA • vAC = vAB+ vBC • Ex: A student walks on a treadmill moving at 4.0 m/s and remains at the same place in the gym. • What is the student’s velocity relative to the gym floor? • zero • b) What is the student’s speed relative to the treadmill? • s = student, t = treadmill, and g = ground • Unknown: vst. Knowns: vsg = 0, vtg = -4.0 m/s. • vsg = vst + vtg→ vst = vsg – vtg = 0 – (-4.0 m/s) = 4.0 m/s • c) What is the treadmill’s speed relative to the student? • vts = - vst = -4.0 m/s

  23. Example: A river has a current with a velocity of 1.0 m/s south. A boat, whose speed in still water is 5.0 m/s, is directed east across the 100 m wide river. • How long does it take the boat to reach the opposite shore? • How far downstream will the boat land? • What is the velocity of the boat relative to the shore? • Solution: • Use the subscripts: r = river, b = boat, s = shore • Given: vrs = 1.0 m/s vbr = 5.0 m/s x = 100 m • Unknowns: a) t b) y c) vbs y vbr = 5.0 m/s x Ө vrs = 1.0 m/s vbs

  24. Use kinematics equation 2: x = xo + vot +1/2 at2 , where a = 0, xo = 0, vo = vbr, and x = 100 m x= vot → solve for t t = x = 100 m = 20 s vo 5.0 m/s b) Use kinematics equation 2: y = yo + vot +1/2 at2 , where a = 0, yo = 0, vo = vrs y = vot = (1.0 m/s)(20 s) = 20 m c) The velocity of the boat relative to shore is the vector sum of the velocity of the boat relative to the river and the velocity of the river relative to the shore (current) vbs = vbr + vrs *Hint: the pattern of subscripts are helpful in problem solving. On the right side of the equation, the two inner subscripts are the same (r). The outer subscripts (b and s) are sequentially the same as those for the relative velocity on the left side of the equation. *** vbs = √vbr2+ vrs2 = √(5.0 m/s)2 + (1.0 m/s)2 = 5.1 m/s Ө = tan-15.0 m/s = 79° measured from the shoreline. 1.0 m/s

  25. Example: If the person on the boat in the previous example wants to travel directly across river, • What angle upstream must the boat be directed? • With what speed will the boat cross the river? • How long will it take the boat to reach the opposite shore? • Solution: • To travel directly across the river, the velocity of the boat relative to the shore must be directly across the river. The vector form of the relative velocity equation • vbs = vbr + vrsis still valid. • Ө = sin -1 vrs = sin-11.0 m/s = 12° • vbr5.0 m/s • b) From the triangle in the diagram, • vbs2+ vrs2 = vbr2 so, • vbs= √ vbr2 - vrs2 • vbs = √ (5.0 m/s)2 – (1.0 m/s)2 = 4.9 m/s • c) The time is then t = y = 100 m = 20 s • vbs 4.9 m/s y x vbr = 5.0 m/s vrs = 1.0 m/s Ө vbs

More Related