1 / 26

ie433 cad

2. IE433-CAD/CAM. CAD/CAM = Computer Aided Design and Computer Aided Manufacturing. It is the technology concerned with the use of computers to perform design and manufacturing functions.. 3. CAD can be defined as the use of computer systems to perform certain functions in the design process.CAM is the use of computer systems to plan, manage and control the operations of manufacturing plant through either direct or indirect computer interface with the plant's production resources..

bernad
Télécharger la présentation

ie433 cad

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. 1 IE433 CAD/CAM Computer Aided Design and Computer Aided Manufacturing Part-1 Introduction to CAD/CAM Industrial Engineering Program King Saud University

    2. 2

    3. 3 CAD can be defined as the use of computer systems to perform certain functions in the design process. CAM is the use of computer systems to plan, manage and control the operations of manufacturing plant through either direct or indirect computer interface with the plants production resources.

    4. 4 From CAM definition, the application of CAM falls into two broad categories: Computer monitoring and control .

    5. 5 Manufacturing support application .

    6. 6 The Product Cycle and CAD/CAM In order to establish the scope and definition of CAD/CAM in an engineering environment and identify existing and future related tools, a study of a typical product cycle is necessary. The following Figure shows a flowchart of such a cycle.

    7. 7

    8. 8 The product begins with a need which is identified based on customers' and markets' demands. The product goes through two main processes from the idea conceptualization to the finished product: The design process. The manufacturing process. The main sub-processes that constitute the design process are: Synthesis. Analysis.

    9. 9 Implementation of a Typical CAD Process on a CAD/CAM system

    10. 10 CAD Tools Required to Support the Design Process

    11. 11 Implementation of a Typical CAM Process on a CAD/CAM system

    12. 12

    13. 13 Definitions of CAD Tools Based on Their Constituents

    14. 14 Definition of CAD Tools Based on Their Implementation in a Design Environment

    15. 15 Definitions of CAM Tools Based on Their Constituents

    16. 16

    17. 17

    18. 18

    19. 19

    20. 20 Automation and CAD/CAM Automation can be defined as the technology concerned with the application of complex mechanical, electronic, and computer-based systems in the operation and control of manufacturing systems.

    21. 21

    22. 22

    23. 23

    24. 24

    25. 25

    26. 26

    27. 27 Advantages of CAD/CAM systems Greater flexibility. Reduced lead times. Reduced inventories. Increased Productivity. Improved customer service. Improved quality. Improved communications with suppliers.

More Related