1 / 44

by W.H. Müller , C. Liebold ICMS-workshop | Edinburgh | June 17-21, 2013

Are higher gradient theories of elasticity amenable to experiments? - A state-of-the-art review. by W.H. Müller , C. Liebold ICMS-workshop | Edinburgh | June 17-21, 2013. LKM. Technische Universität Berlin Institut für Mechanik - LKM Einsteinufer 5 D-10587 Berlin.

bevis
Télécharger la présentation

by W.H. Müller , C. Liebold ICMS-workshop | Edinburgh | June 17-21, 2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Are higher gradient theories of elasticityamenable to experiments? - A state-of-the-art review byW.H. Müller, C. Liebold ICMS-workshop | Edinburgh |June 17-21, 2013 LKM Technische Universität Berlin Institut für Mechanik - LKM Einsteinufer 5 D-10587 Berlin Supported by:

  2. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  3. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  4. Applications in micro-mechanics I A MEMS application: Micro 3D - gyroscope A MEMS application: Micro-sensors and black box in automotive technology

  5. Applications in micro-mechanics II • Objective:Stress and deflection measurements in micro beams subject to bending A MEMS application: An acceleration sensor in the automotive industry Raman peak position along the thickness of a deflected silicon beam; Srikar et al. (2003):

  6. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  7. The size effect (experiments from literature) • The term “size effect”refers a stiffer (elastic) material behavior on the sub-micronscale. • Strain gradient theories can be used to model the size effect of micro-size structures, e.g., for simple beam bending or torsion of small wires. • A material length scale parameter called l is of importance in non-local theories, such as the couple stress theory used, e.g., by Yang et al. (2002). Left: Torsion of small copper wires performed by Chong et al. (2001) revealed:l = 3µm. Right: Simple beam bending experiments on epoxy by Gao and Park (2007) revealed:l =17.6µm. • Objective: Determination of the material length scale parameter l (additional stiffness parameter)of silicon and silicon nitride using atomic force microscopy and Raman spectroscopy.

  8. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  9. Non-local theories (overview) local - non-local theory CS Couple Stress theory MSG Modified Strain Gradient theory SG Strain Gradient theory class. theory stored energy density: stress and strain measures: (isotropic) balance law: nr. of parameters: in use for finite element method by various authors published derivations: analytical displacement field:

  10. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  11. Couple stress theory for beam bending I Derivation of the deflection curve, the strain and the bending rigidity. • The Euler-Bernoulli displacement field: • Components of the strain tensor: • Components of the stress tensor: • New: Components of the rotation gradient tensor:

  12. Couple stress theory for beam bending II • The principle of virtual work: • The differential equation: • The governing boundary conditions: • Integration of the differential equation: • Using the boundary conditions for a clamped beam the solution for deflection and strain reads:

  13. Couple stress theory for beam bending III • Derivation of the bending rigidity for x=L, ν=0: inverse quadratic function in h Figure: Simple beam bending experiments on epoxy by Gao and Park (2007) revealed: l=17,6µm. • Conclusion: - If l=0 the couple stress bending rigidity results in the conventional one. - The formula of the couple stress theory predicts a size effect.

  14. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  15. The AFM tool I • The experiments for measuring w and ε: A Raman spectroscope integrated in an AFM used for the bending of µm beams The central equation of the AFM tool for determining the beam deflection reads: PSD LASER Raman laser Raman Laser AFM Laser observation variables: AFM laser

  16. The AFM tool II • 1st. The non-linear behavior of the PSD (Photo Sensitive Diodes): 2 1 AFM Laser cylindrical AFM probe Wheatstone bridge range of linearity 3 4 „signal=voltage“ non-linear behavior

  17. The AFM tool III • 2nd. Calibration of the tip deflection Δs: top view of piezosturning the feed table The Δx feed motion was produced by a calibrated screw thread driven by piezo-elements. Tapping the AFM probe against a rigid surface projected the Δx-input onto the voltage signal of the PSD. analysis points U [mV] U [mV] m 0 xmax x [nm] -single experiment - rescaled feed motion curves - slopes increase linearly! This gave rise to a quadratic relationship of the form:

  18. The AFM tool IV • 3rd. The AFM probe against a micro beam (separating both deflections): arig, nrig … values of the regression line of the rigid surface U [mV] a, n … values of the regression line with the micro beam in between x [nm] s…defl. of the tip wbeam … defl. of the beam • Conclusion: This approach compensated the non-linearity of the AFM tool.

  19. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  20. Performing the experiments I • The force calibration of the AFM probe against a calibrated cantilever: • The AFM cantilever was calibrated at the PtB (Physikalisch Technische Bundesanstalt, Braunschweig, Germany) by a nano-compensational weight bridge for the force data in combination with a capacitive read out for the deflection data. • It revealed a spring constant of the cantilever of about: F=kPtBwPtB , kPtB=4.868 N/m Transfer of the spring constant

  21. Performing the experiments II • SEM analysis for determining the dimensions of the tested micro-beams: L=200±0.2 µm b=39±0.2 µm t=0.98±0.075 µm • Pictures via the optical microscope of some specimens: force application point SiN SiN SiN SiN SiN cSi

  22. Performing the experiments III • A video recording of the loading- unloading sequence via the optical microscope: (0) (1) (2) (3) (4)

  23. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  24. The Raman effect for strain measurement I • The setup of our Raman spectrometer:

  25. The Raman effect for strain measurement II • The optical path of the laser beam: 1: live cam 2: beam splitter 3: polarizer (scattered) 4: aperture (slit) 5: notch filter 6: optical grating 7: CCD camera 8: filters for laser power 9: shutter 10: beam expander 11: polarizer (incident) 12: sample stage 13: optical lenses 14: shutter 15&16: laser source

  26. The Raman effect for strain measurement III • Inside the CCD camera (qualitatively): Si Raman peak @ ω 520 cm-1 A typical spectral distribution of silicon. I. DeWolf (1998)

  27. The Raman effect for strain measurement IV Some theoretical relationships • With the idea of effective force constants in the directions of the generalized coordinates of the phonons, we obtain the secular equation without presence of strain: Si Raman peak @ ω  98,5 THz 520 cm-1

  28. The Raman effect for strain measurement V Some theoretical relationships • Acc. to the so-called morphic effect, the strains εklenter the secular equation as follows: we can rewrite the secular equation: the secular equation under presence of strain • Consider pure tensionin x-direction:

  29. The Raman effect for strain measurement VI Some theoretical relationships • A separation of the three eigenvalues is possible by polarization of the incoming and scattered laser light (Raman selection rules), so that the strain-shift relationship reads: this holds for silicon in the present configuration Experimental procedure • Taking spectra in loaded and unloaded configuration at different points around the fixture: • numerical analysis for spectral position: Gauss / Lorentz mixture -reference- -loaded-

  30. The Raman effect for strain measurement VII Experimental application to silicon Raman @ 190 µN Raman @ 81 µN Euler Bernoulli-Theorie FEM @ 190 µN F x=0 strain εxx 

  31. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  32. The problem of penetration depth of the laser I • Theoretical penetration depth of an extended laser beam in silicon (De Wolf*, 1996): with Aspnes* (1983): I0 F D I ε dp x • Specification for the choice of d: • 0.1 chosen a = absorption coefficient measured for Si at different wavelengths *De Wolf, I. (1996). Micro-Raman spectroscopy to study local mechanical stress in silicon integrated circuits. Semicond. Sci. Technol. 11, pp.139–154. *Aspnes, D. E., Studna, A. A. (1983). Dielectric functions and optical parameters of Si, Ge, GaP, GaAs, GaSb, InP, InAs, and InSb from 1.5 to 6.0 eV. Am. Phys. Society. 27(2), pp. 985-1009.

  33. The problem of penetration depth of the laser II • Because the used beam thicknesses are 7000 nm, 3000 nm and 1000 nm a correction factor ffor the strains can be introduced as follows: εmax I0 calculated by conventional theory ε=0 x 0 dp increase of uncertainties f exp.

  34. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  35. Results I • Corrected strain values for silicon micro beams measured using the Raman spectroscope: t=7µm, L=175µm measurement at different points around the fixture corr factor: f=1.19 measurement at different points along the beam length t=3µm, L=90µm t=3µm, L=130µm corr corr factor: f=1.71 factor: f=1.78

  36. Results II • No strain values for silicon nitride, due to a thin metallic layer. • The corresponding Raman signal is smeared out.

  37. Results III • The deflections of silicon micro beams measured via the AFM tool: t=1µm, L=130µm t=7µm, L=175µm t=1µm, L=50µm t=3µm, L=130µm

  38. Results IV • The deflections of silicon nitride micro beams measured via the AFM tool: t=0,8µm, L=170µm t=0,8µm, L=120µm t=0,8µm, L=80µm t=0,2µm, L=29µm t=0,6µm, L=80µm t=0,6µm, L=170µm … otherwise large bending angle

  39. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  40. Conclusions about the length scale parameter I • The bending rigidities of silicon micro beams measured via the AFM tool: Bending rigidity vs. thickness of Epoxy 1 2 3 4 5 6 7 8 • Conclusion: The material length scale parameter of single crystalline silicon is smaller than l < 200 nm.

  41. Conclusions about the length scale parameter II • The bending rigidities of silicon nitride micro beams measured via the AFM tool: Bending rigidity vs. thickness of Silicon Nitride 0,1 0,2 0,3 0,6 0,8 1 • Conclusion: The material length scale parameter of silicon nitride is smaller than l < 50 nm.

  42. Outline • Introduction and motivation: • Applications in micro-mechanics • The size effect (experiments from literature) • Overview on non-local continuum theories • Beam bending in couple stress theory • The AFM tool for deflection measurement • Performing the experiments: • Force calibration of the AFM • The beams • The Raman effect for strain measurement: • General remarks • Discussion of the penetration depth of the laser • Results for Si and SiN • Conclusions about the length scale parameter of Si and SiN • Improvements / discussion

  43. Improvements / Discussion • Raman / Silicon: • A minimization of the penetration depth of the Raman laser can be achieved either by an UV laser source in combination with a UV spectrometer or by an independently moveable AFM-TERS probe. • For detecting a size effect even smaller micro beam geometries (particularly smaller thicknesses) are needed. • Raman / Silicon-Nitride: • For detecting a Raman signal the metallic layer should be removed (e.g., by etching). • Size Effect: • In order to detect a more pronounced size effect materials with a more complex micro-structure should be tested.

  44. Thank you for your patience and endurance when listening to (experimental) mechanics presentations!

More Related