1 / 18

Continuity Equation and Midterm Review

Continuity Equation and Midterm Review. From fluid statics to fluid dynamics. Fluid statics – the study of stationary fluids (pressure of a static column of fluid, buoyancy). Fluid dynamics – the study of fluids in motion (flow of water through a pipe system, airflow). Let ’ s flow!.

bibbs
Télécharger la présentation

Continuity Equation and Midterm Review

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Continuity Equation and Midterm Review

  2. From fluid statics to fluid dynamics Fluid statics– the study of stationary fluids (pressure of a static column of fluid, buoyancy) Fluid dynamics– the study of fluids in motion (flow of water through a pipe system, airflow) Let’s flow!

  3. One crucial assumption Water, oil, and almost all other liquids are incompressible. No matter how much pressure is exerted on them, the total volume of a liquid will remain constant. This is not true for gases (which can be compressed), but it is true for liquids for up to one part per billion. What does this mean?

  4. Water is incompressible No matter how hard you push on the piston, the volume of the water will not decrease! (this is not exactly true of course, but it is true to a very close approximation) Water and other liquids have a fixed volume, and this will factor in very strongly when analyzing the following scenario. piston F H2O

  5. Flow must be steady and continuous This means that when water flows through a pipe, the same amount of water crosses any plane of the pipe in a given interval of time. flow The same amount of water crosses this plane per second… …as this one!

  6. Flow Continuity No build-up or lack of water will exist when the liquid reaches a steady, sustainable flow. This leads us to a very interesting conclusion! A B flow Volume that crosses plane A per unit time Volume that crosses plane B per unit time

  7. The same concept applies to pipes that have a changing cross-sectional area! A1 flow A2 Volume that crosses plane A1 per unit time Volume that crosses plane A2 per unit time

  8. A1 flow A2 In order to have a stable flow of liquid through the pipe, the same amount of volume per unit time must pass through any cross-section of the pipe! This is called flow continuity, and applies to all incompressible fluids (pretty much all liquids) However, this does not say anything about the speed of the fluid through each section…

  9. Whiteboard: Explain your childhood! Why does this happen?

  10. v1 A1 v2 A2 But, section 1 has a larger area, and can fit more water in it at any given moment! How could it be possible for the same amount of water to pass through each section per unit time? Answer: The water in the smaller section must have a greater speed!

  11. A1 ΔV2 ΔV1 A2 Δx2 Δx1 The same volume of water per unit time must pass through both sections for continuous flow to occur.

  12. Δx1 A1 ΔV1 flow

  13. Volume Rate of Flow When a fluid passes through a pipe, the amount of volume per unit time that passes any point on the pipe is called the volume rate of flow. By using some simple geometry and kinematics, we can also express the volume rate of flow in terms of cross-sectional area and fluid speed. Volume rate of flow

  14. Flow Continuity When an incompressible fluid passes through a pipe, the amount of volume per unit time that passes any point on the pipe must be the same. Using the earlier expression for volume rate of flow, we can state this mathematically as the continuity equation. v1 v2 A1 A2

  15. Super Soaker Whiteboard In the nozzle of a super soaker, water flows from a tube of radius 2R to a tube of radius R. If the speed of the water as it flows through the wider portion is v, what is the speed of the water as it shoots out the end?

  16. Radius is not area! If you divide the radius by two, you divide the area by four. This will cause the smaller segment to have four times the fluid speed.

  17. Area x Velocity = Constant Area and velocity are inversely proportional A

More Related