1 / 46

Models for Predicting Bed-Related CFB Performance Parameters

Models for Predicting Bed-Related CFB Performance Parameters. Pete Rozelle U.S. Department of Energy ARIPPA, May 23, 2006. Some CFB Plant Issues Related to Solids Characteristics and Flows. Undersized Bottom Ash Equipment. Some CFB Plant Issues Related to Solids Characteristics and Flows.

brigit
Télécharger la présentation

Models for Predicting Bed-Related CFB Performance Parameters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Models for Predicting Bed-Related CFB Performance Parameters Pete Rozelle U.S. Department of Energy ARIPPA, May 23, 2006

  2. Some CFB Plant Issues Related to Solids Characteristics and Flows Undersized Bottom Ash Equipment

  3. Some CFB Plant Issues Related to Solids Characteristics and Flows Excessive Upper Combustor Temperature (Delta P Too Low) Undersized Bottom Ash Equipment

  4. Some CFB Plant Issues Related to Solids Characteristics and Flows Excessive Limestone Consumption Excessive Upper Combustor Temperature (Delta P Too Low) Undersized Bottom Ash Equipment

  5. Two Items to be Covered Today • Bottom Ash Flow Rate • Based on Readily Measured Fuel Properties • Limestone Consumption • Based on Ash and Limestone properties • Both of the Above • Based on Boiler Operating Parameters (DCS Data) • Boiler Solids Partition Function

  6. Solids Flows in Mineral Processing Physical Separation Equipment Product Stream Separation Stimulus Feed Stream Tailings Stream

  7. Quantifying the Separation by a Coal Preparation Circuit: the Partition Function k(y) is the mass fraction of particles of specific gravity y that reports to the coal stream The sum of each gravity interval times k(y) is the clean coal yield.

  8. Applying the Partition Function to a CFB Boiler kd(x) is the mass fraction of particles of ash size interval x that reports to bottom ash stream The sum of each size interval times kd(x) is the bottom ash flow rate.

  9. Example of a Generic Partition Function

  10. What is Needed to Develop a Partition Function for a Boiler • Flyash and Bottom Ash Size Analyses • Flyash and Bottom Ash Flow Rates • Major and Minor Oxide Analyses for Flyash, Bottom Ash, Limestone, and Fuel Ash • Flyash and Bottom Ash Flow Rates can be Calculated from a System of Simultaneous Material Balances (see Next Slide) • Composite Ash Flow (by Particle Size) Calculated from Flyash and Bottom Ash Flow Rates and Size Analyses • Partition Function Calculated from Composite Ash Flow (by Size) and Bottom Ash Flow (by Size)

  11. Calculating Ash Flow Rates from Simultaneous Material Balances CaO and SiO2 Material Balances: Lab Analyses: CaOf: Fuel CaO Content CaOs: Limestone CaO Content CaOba: Bottom Ash CaO Content CaOfa: Flyash CaO Content SiO2f: Fuel SiO2 Content SiO2s: Limestone SiO2 Content SiO2ba: Bottom Ash SiO2 Content SiO2fa: Flyash SiO2 Content DCS Quantities: Ff: Fuel Feed Rate Fs: Limestone Feed Rate Unknowns Fba: Bottom Ash Flow Rate Ffa: Flyash Flow Rate

  12. Calculating Ash Flow Rates from Simultaneous Material Balances CaO and SiO2 Material Balances: Lab Analyses: CaOf: Fuel CaO Content CaOs: Limestone CaO Content CaOba: Bottom Ash CaO Content CaOfa: Flyash CaO Content SiO2f: Fuel SiO2 Content SiO2s: Limestone SiO2 Content SiO2ba: Bottom Ash SiO2 Content SiO2fa: Flyash SiO2 Content 2 Equations and 2 Unknowns DCS Quantities: Ff: Fuel Feed Rate Fs: Limestone Feed Rate Unknowns Fba: Bottom Ash Flow Rate Ffa: Flyash Flow Rate

  13. Calculating the Composite Ash Flow Rate by Size- 1 Calculate the Flow Rate of Each Size with Each Ash Stream- Example: Bottom Ash Flow Rate = 35,000 pph, 12% of Bottom Ash is 80 Mesh by 100 Mesh, Flow Rate of 80 by 100 Mesh Size with Bottom Ash= 0.12 X 35,000 pph = 4,200 pph

  14. Calculating the Composite Ash Flow Rate by Size- 2 Flyash Ash Flow Rate = 45,000 pph, 7% of Flyash Ash is 80 Mesh by 100 Mesh, Flow Rate of 80 by 100 Mesh Size with Flyash Ash= 0.07 X 45,000 pph = 3,150 pph

  15. Calculating the Composite Ash Flow Rate by Size- 3 Flow Rate of 80 by 100 Mesh Size with Bottom Ash = 4,200 pph Flow rate of 80 by 100 Mesh Size with Flyash = 3,150 pph Flow Rate of 80 by 100 Mesh Size with Composite Ash = 4,200 pph + 3,150 pph = 7,350 pph

  16. Calculating the Partition Function Values fba(x) is the flow rate of size interval x with the bottom ash (calculated) fca(x) is the flow rate of size interval x with the composite ash (calculated)

  17. Calculating the Partition Function Values From our Example: kd(x) for x = 80 by 100 mesh is: (4,200 pph)/(7,350 pph) = 0.57

  18. Example of a Partition Function for a CFB Boiler

  19. Calculating Ash Flow Rates and the Partition Function • Using Simultaneous Material Balances can reduce Effort Required for Measuring the Ash Split • The Partition Function can be a Useful Determinant of Cyclone Performance.

  20. Prediction of Bottom Ash Flow Rate What is Needed: • Partition Function • DCS Data: • Solids, Air, and Main Steam Flow Rates • Solids Analyses • Short Prox for Fuel • Major and Minor Oxides for Fuel and Limestone • Float Sinks for Fuel

  21. The Significance of Float Sink Analyses They Split the Fuel up by Specific Gravity and Ash Content.

  22. The Significance of Float Sink Analyses Combustion Behavior Low Ash Fuel Particle High Ash Fuel Particle

  23. The Attrition Index The Fraction of a Particle Originally Large enough to make Bottom Ash that Reports to the Flyash Stream Low Ash Fuel Particle= 1 High Ash Fuel Particle=0

  24. And Now Some Model Results:Quantifying Bottom Ash Flow in Terms of Fuel and Limestone Properties

  25. Laboratory Combustor Partition Curve

  26. The Bottom Ash Model: The Fuel Contribution kd(x): The partition function calculated from boiler data Kf(y) the fuel attrition index based on particle specific gravity (i.e. ash content) The Result: Fba,f: The flow rate of bottom ash derived from the fuel From DCS: Ff: The Fuel Feed Rate From Float Sink Table: Mf(x,y): The Mass Fraction of Fuel with in Size and Specific Gravity Increment x,y A(x,y): The Ash Content of the Above Fuel Increment

  27. Float Sink Analyses A(x,y) Mf(x,y)

  28. The Bottom Ash Model: The Limestone Contribution kd(x): The partition function calculated from boiler data Ks,a the limestone attrition index The Result: Fba,s: The flow rate of bottom ash derived from the Limestone From DCS: Fs: The Limestone Feed Rate From a Lab Analysis: Ms(x): The Mass Fraction of Limestone in Size Increment x Ls: The Limestone LOI S: fractional SO3 Content of Limestone in Bottom Ash

  29. The Bottom Ash Model: The Result

  30. The Bottom Ash Model: some Test Results Analyses of Fuels Tested

  31. The Bottom Ash Model: some Test Results

  32. The Bottom Ash Model: some Test Results Conditions Used for Combustion Tests

  33. The Bottom Ash Model: some Test Results

  34. The Bottom Ash Model • Reducing the Presence of Coarse, High Ash Content Fuel Particles in the Feed can Bias the Ash Split Toward Flyash • Identifying the Species that Create Bottom Ash can Narrow the Search for Fuel Constituents that can Cause Ash Cooler Problems • Updated Version is Being Developed

  35. Prediction of Limestone Consumption What is Needed: • Partition Function • DCS Data: • Solids, Air, and Main Steam Flow Rates • Solids Analyses • Short Prox for Fuel • Major and Minor Oxides for Fuel and Limestone • Float Sinks for Fuel • Limestone Attrition Index • Limestone Sulfation Levels in Ash Streams

  36. The Limestone Model The Result: fba: The Fraction of Limestone CaO that will report to the Bottom Ash Stream Ms(x) is the mass fraction of limestone of size x Is,a is a CaO Attrition Index A word on Limestone and Attrition: Sparry Stones Attrit a Lot more than Micritic Stones

  37. Limestone Attrition Products Sparry Stone Micritic Stone

  38. The Limestone Model ffa: The Fraction of Limestone CaO that will report to the Flyash Stream

  39. The Limestone Model Ff: Fuel Feed rate Sf: Sulfur Content of Fuel s: Fractional Sulfur Capture Rba: Sulfation Level Characteristic of Bottom Ash Rfa: Sulfation Level Characteristic of Flyash MWCaO: The Molecular Weight of CaO MWS: The Molecular Weight of Sulfur Cas: CaO Content of Limestone The Result: F’s: The Predicted Limestone Consumption by the Boiler

  40. The Limestone Model: Comparison with Boiler Test Results Chemical Analyses of Sorbents Examined

  41. The Limestone Model: Comparison with Boiler Test Results Particle Size Distributions of Sorbents Tested in the Boiler

  42. The Limestone Model: Comparison with Boiler Test Results

  43. Uses for the Limestone Model • Predicting Limestone Consumption Based on Boiler Parameters and Limestone Lab Analyses • Helping to Select the Lowest Cost Stone • Whether Changes to a Grinding Circuit can Lower Costs

  44. What is required to use these Models • Lab Analyses of Solids • DCS Data • Inexpensive Software • MathCad • Excel

  45. A Word on Limestone

  46. A Word on Limestone • Limestones under Boiler Conditions have been shown to still Absorb SO2 1-2 hours after introduction to the System. • The Mean Bed Residence Time in a Rock Burner is Determined by Fuel Ash and Sulfur Content and Delta P. It may be less than an Hour. • Reducing Ash and Sulfur Content can Increase Mean Bed Residence Time

More Related