1 / 18

Soft Phone Installation and Registration

Soft Phone Installation and Registration. Step by Step Instructions By Prof. Yousif @ Valencia Community College. Installing Cisco IP Communicator. Network Requirements.

cara-vasquez
Télécharger la présentation

Soft Phone Installation and Registration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Soft Phone Installation and Registration Step by Step Instructions By Prof. Yousif @ Valencia Community College

  2. Installing Cisco IP Communicator

  3. Network Requirements • For Cisco IP Communicator to successfully operate as an endpoint in your network, your network must meet the following requirements: • Voice over IP (VoIP) configured on your Cisco routers and gateways • Cisco CallManager Release 3.3(3) SR 3 or higher installed in your network and configured to handle call processing • If you want Cisco IP Communicator to auto-locate its TFTP server, you also need an IP network that supports DHCP with Cisco Option 150 configured with the address of your TFTP servers.

  4. Client PC Requirements • Windows 2000 Professional with service pack 3 or later • Windows XP Professional with service pack 1 or later • Minimum connection bandwidth of 128 Kbps

  5. Configuring CIPC Set up manually if the PC where CIPC is installed was configured with a static IP Address The TFTP Server address is the same as your CallManager address

  6. CIPC Registration Your CIPC will get a local Directory Number (LDN) Automatically just like your 7960 Phone when Auto-Registration is enabled.

  7. Computer Telephony Integration (CTI) in Windows From the Control Panel….

  8. Computer Telephony Integration (CTI) in Windows

  9. Verifying the CIPC Registration • Devices Phones Find Button • CIPC gets a Local Directory Number Using Auto Registration Just like Cisco 7960 IP Phone

  10. Manual Registration Option Devices Phones  Add a New Phone

  11. Adding a User

  12. Assigning a Device to a User“Device Association” Scroll down and click on “update selected”

  13. Confirm Association

  14. Restarting the CIPC

  15. Changing Internal Caller ID • Scroll Up and Click Update • You will have to restart the phone afterwards. From the same page click on “Reset Device”/

  16. Installing CIPC Admin Tool on CallManager What the admin Tool Does for You.

  17. Integrating Directories and Dialing Rules in CIPC Click Next then Choose Auto-Detect after verifying the values

  18. Integrating Directories and Dialing Rules in CIPC

More Related