1 / 7

5 Common Symptoms of Spa Pump Failure

When you find spa pump failure, you should consider buying spa replacement pumps from Cedar Tubs Direct. For more information, feel free to give us a call now at 1-800-759-8990 OR You can visit https://www.cedartubsdirect.com/hot-tub-pumps-c-4.html

cedartubsdirect
Télécharger la présentation

5 Common Symptoms of Spa Pump Failure

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 5 Common Symptoms of Spa Pump Failure 5 Common Symptoms of Spa Pump Failure There are so many reasons behind the failure of spa pumps and some of the best symptoms are discussed below: 1. Leakage If the frames are loose, they may cause water to escape and propel through the pump. It’s suggested to check the frames and o-rings to make sure that they are fully secure and tight. Leakage causes when there’s a faulty pump seal. You should change the pump seal to make sure that your pump gets a tight and leak-free fit.

  2. 2. Pressure Low Water If the water pressure is low, it may be due to some sorts obstructions. They may prevent the from turning on. Check the impeller and remove any debris if present to prevent blocking further. of impeller

  3. 3. Unnecessary Noise If the bearings are worn, they can produce humming sound and prevent the motor from functioning properly. You need to check the bearings for dirt or corrosion and replace them if you find them worn. Don’t forget to check the motor coupling, brackets and other connected parts. Make sure that all the screws, nuts and bolts are perfectly connected and fully secure.

  4. 4. Overheating However, you can keep your hand on a spa pump safely under regular conditions. When it produces more heat with the increase in temperature, it releases unnecessary energy. Therefore, overheating can occur, especially when there’s not sufficient clean air flowing through the motor. If it’s the case, it can be due to the motor. Therefore, you should place your spa pump in an area without any dirt and leaves.

  5. 5. Defective Motor If your motor is not functioning properly, you should check whether the power switch is one. If it is and still not working, check whether there are any failed relays, burned out wires or a blown fuse. Inspect all connections like copper bonding wire and pump power cable and identify any possible signs of damage.

  6. Bottom Line – When you find any above-discussed signs of spa pump failure, you should consider buying spa replacement pumps from Cedar Tubs Direct. For more information, feel free to give us a call now at 1-800-759-8990.

  7. Contact Us Address: Northern Lights Cedar Tubs & Saunas 305 Mckay Ave. Unit #20 Winnipeg, Manitoba, Canada, R2G 0N5 Ph: 800 759 8990

More Related