1 / 5

Prediction lever screw and axle. By Chris and Brodie

Making a mechanical digger. Prediction lever screw and axle. By Chris and Brodie. Materials. Card scissors A card board box 20cm long Paper fasteners 4 card board circles glue. steps. Cut out a rectangle of card Cut out 20cm long and 2cm wide and fold 5cm of it

celeste-aguirre
Télécharger la présentation

Prediction lever screw and axle. By Chris and Brodie

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Making a mechanical digger Prediction lever screw and axle. By Chris and Brodie

  2. Materials • Card • scissors • A card board box 20cm long • Paper fasteners • 4 card board circles • glue

  3. steps • Cut out a rectangle of card • Cut out 20cm long and 2cm wide and fold 5cm of it • Make a 27cm long 2cm wide strips of card. • Cut out a 12cm long 2cm wide. • Put the 12cm long card on the back of the digger. • Join the 27cm long card to the 12cm card and to the scoop and do it again on the other side • Make a 27cm long card and join to it. • Draw four circles four wheels.

  4. results • Our digger works because of a lever. • It works by pulling a card at the back of the digger. • The part of the lever where the paper fasteners are is a fulcrum. • The wheels on the digger helps the digger move.

  5. conclusion • Our prediction was correct because there are wheels and a lever.

More Related