1 / 27

Simbol-X Focal Plane: Preliminary Architecture Scheme

This presentation discusses the preliminary architecture scheme of the Simbol-X Focal Plane, including optics, multilayer coating technique, and the focal detector assembly.

cgroom
Télécharger la présentation

Simbol-X Focal Plane: Preliminary Architecture Scheme

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 1 The Simbol-X Focal Plane Preliminary Architecture Scheme (Phase A Studies) Andrea Goldwurm AstroParticule et Cosmologie – Paris Service d’Astrophysique / CEA – Saclay France Based on a set of presentations by Ph. Ferrando (SAp/CEA & APC), O. Limousin (SAp/CEA), L. Struder (MPE), et. al.

  2. Participating laboratories Short history A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 2 F : CEA/Saclay, CESR/Toulouse, APC/Paris, LAOG/Grenoble, Obs.Paris/Meudon It : (INAF :) O.A.Brera, Roma, Palermo, IASF Milano, Bologna D : MPE Garching, I.A.A.Tübingen • End ‘01 : First ideas & discussions CEA/Saclay & O.A.Brera • End ‘03 : CNES call for scientific ideas using formation flight • Mid ‘04 : Selection of 4 missions for assessment phase (ph 0) • End ‘05 : Simbol-X recommended for phase A (alone)

  3. Simbol-X scientific requirements Continuum sensitivity [1 Ms, 3 ] : 10-14 erg/cm2/s [20-40 keV] (1mCrab) Line sensitivity : 10-7 ph/cm2/s @ 68 keV A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 3 Energy band : ~ 0.5 to > 80 keV DE : < 150 eV @ 6 keV (Fe Ka) < 1.3 keV @ 68 keV (44Ti) Dq (HPD) : goal 15 arcsec (< 20) FOV : goal 13 arcmin (> 9) Attitude reconst. : ± 2 arcsec Dt : < 100 microsecondes  Large effective area, excellent angular resolution, very low background

  4. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 4 The only way to go : focusing How ? Extend to the hard X-rays the successful “soft X-rays” technics, with very long focal length possible thanks to formation flight 20 to 30 m Grazing incidence : Emax 1/qFocal Length

  5. On behalf of the Simbol-X collaboration Simbol-X a new generation hard X–ray telescope 0.5 – 80 keV formation flight

  6. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 6 The Simbol-X challenges • Optics : - image quality (15” HPD) with large FOV - high throughput (500-1000 cm2 @ 30 keV) - with “low” mass ! • Focal plane : - very low background - wide energy response with high spectroscopic performances • Formation flight - onboard systems - operations management

  7. Optics : effective area and FOV optimization (in progress) Mirror parameters to be optimized in phase A Focal length : range 20 - 30 m Shell diameters : 30 to max 70 cm Shell thickness : 0.1 to 0.3 mm ? Number of shells : ~ 100 A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 7 Multilayer coating technique

  8. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 8 The focal detector assembly : principle (CEA/SAp, APC, CESR, MPE-IAAT) The needs • Spectro-imaging system, with pixel size with good oversampling of the PSF (~ 500 mm) and full coverage of field of view (~ 8 cm) • Very low background (10-4 cts/cm2/s/keV) • Operation at “room” temperature • Low energy response down a few 100’s eV • Good spectral resolution for Iron and Ti lines Door Cal.S. General design of the focal plane assembly

  9. < 17 keV > 17 keV MPD CdZnTe Active anticoincidence Optical filter (0.1 mm Al) Low energy detector (450 mm Silicium) High energy detector (2 mm Cd(Zn)Te) A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 9 The focal detector assembly : principle (CEA/SAp, APC, CESR, MPE-IAAT) The needs • Spectro-imaging system, with pixel size with good oversampling of the PSF (~ 500 mm) and full coverage of field of view (~ 8 cm) • Very low background (10-4 cts/cm2/s/keV) • Operation at “room” temperature • Low energy response down a few 100’s eV • Good spectral resolution for Iron and Ti lines General design of the focal plane detector unit

  10. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 10 SIMBOL-X Detectors Requirements • The detectors must : • Sample the PSF over a 12 arcmin field of view • 500 x 500 µm² pixels • Limited dead areas (useful from construction anyway !) • 16384 pixels, i.e. ~ 64 cm² • Cover the energy range from 0.5 up to 80 keV • Have excellent spectral response • Have timing performances (physics and background rejection) • Compliant with space constraints and launch • Two superimposed detector arrays • LED (Low Energy Detector) - Si 0.5 keV to 20 keV • HED (High Energy Detector) - CdTe 8 keV to 80 keV • Detector arrays are independent • Surrounded by an active shielding against background

  11. The focal detector assembly : current design A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 11 Low energy detector (450 mm Silicon) ~ 500 mm size pixels High energy detector (2 mm Cd(Zn)Te) Active anticoincidence shield Current study parametres • Spectro-imaging system 0.5-100 keV • Pixel size ~ 500 mm • Size 8x8 cm2, 128x128 pixels • Operational temperature ~ -40°/ -30°C • Anticoincidence for Cd(Zn)Te ensured, for Si to be worked out

  12. The Low Energy Detector A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 12

  13. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 13

  14. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 14

  15. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 15 One DEPFET pixel spectral response

  16. Low energy detector A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 16 Read-out and spectroscopic predictions • 4 quadrants in parallel • read-out : 4 s per row • Full frame in 256 s • Window mode possible

  17. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 17 High energy detector

  18. High energy detector : Basic element A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 18 256 pixels CZT assembly: principle Segmented anode Detector Platform ASIC: 256 readout channels

  19. Sector 2×4 modules HED plane 2×4 sectors = 8 sectors = 16384 pix A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 19 High Energy Focal Plane CALISTE Module Cd(Zn)Te 10×10×2 mm²16×16 = 256 pix of 500×500 μm² E range ~ 5–100 keV E ~ 1 keV @ 60 keV (-40°C) Dead zones: 2 pix between modules 3 pix between sectors

  20. High Energy Detector (CEA/Saclay) • Tests of pixellated Cd(Zn)Te matrices 256 pixels CZT array, 6 mm thick (eV-Products) 256 pixels Schottky arrays, 0.5 mm thick (ACRORAD) • Hybridization •ASICs development (IDeF-X Vx.x) A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 20 Arrays of Cd(Zn)Te pixellated crystals, with front-end ASICs

  21. -11° / 500V / CZT 2 mm / 64 pixels 1.48 keV FWHM -18° / 400V /CdTe Schottky 1 mm / 64 pix 1.0 keV FWHM A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 21 High energy detector Current results… CdTe Detector Thermal and vacuum chamber IDeF-X V1.0 Analog read-out level 1

  22. ISGRI : CdTe Pt/Pt 4x4x2 mm3 / 120V / 0°C R&T IDeF-X V1.0 : CdTe In/Pt 2x2x0.5 mm3 / 340V / 24°C 5.6 keV FWHM 1.1 keV FWHM (0.9 keV right side) 2005 0.73 keV FWHM at 13.9 keV A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 22 Since ISGRI … 2001 à 2005 2001

  23. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 23 Example of characterization of a CdTe detector array CdTe / Schottky /1 mm / 64 pixels / 400 V -18°C

  24. Background issues (1) baffling against diffuse emission A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 24 Sizes: interdependent, and also dependent on formation flight accuracy (tilt and shift) Typical numbers Baffle : 3 m diameter Collimator : ~ 1.5 m long ~ 13 cm diameter Current design : complete overall sky shielding (outside mirror F.O.V) Composition : graded shield Ta/Sn/Cu/Al/C

  25. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 25 Background issues (2) rejecting particle induced background Implementation of active shielding coupled to inner passive graded shield CR ~ 5000 ct/s AW ~ 1 μs => < 1% dt

  26. LEDA HEDA DPDPA Collimator Door Calibration Wheel Anti-Coincidence LEDE HEDE ACDE Protective Enclosure DPPSA Passive Radiator Heat Pipes A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 26 The focal detector assembly : overview Current allocation (with margins) 90 kg, 75 W

  27. A. Goldwurm The Simbol-X Focal Plane, Simbol-X Meeting, OAB, Milano, 17 / 10 / 2006 27 Grazie per l’attenzione !

More Related