1 / 45

Math 3C

Math 3C. Practice Word Problems. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB.

chaim
Télécharger la présentation

Math 3C

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Math 3C Practice Word Problems Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  2. 1) A dangerous substance known as Chemical X is lethal if its concentration in the air is 100 parts per million by volume (ppmv). The half-life of chemical X is known to be 7 hours. If I accidentally release a quantity of chemical X in my secret underground lab such that its initial concentration is 1500 ppmv, how long do I have to wait before I can enter the lab again? Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  3. 1) A dangerous substance known as Chemical X is lethal if its concentration in the air is 100 parts per million by volume (ppmv). The half-life of chemical X is known to be 7 hours. If I accidentally release a quantity of chemical X in my secret underground lab such that its initial concentration is 1500 ppmv, how long do I have to wait before I can enter the lab again? We are given the half-life, so we can assume exponential decay. We know the general formula will be something like Where y(t)=concentration after t hours, and y(0)=1500 Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  4. 1) A dangerous substance known as Chemical X is lethal if its concentration in the air is 100 parts per million by volume (ppmv). The half-life of chemical X is known to be 7 hours. If I accidentally release a quantity of chemical X in my secret underground lab such that its initial concentration is 1500 ppmv, how long do I have to wait before I can enter the lab again? We are given the half-life, so we can assume exponential decay. We know the general formula will be something like Where y(t)=concentration after t hours, and y(0)=1500 The half-life is given, so we can find the value for k (it will be negative) Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  5. If a half-life is given, the value of k is always If a doubling time is given, k is always 1) A dangerous substance known as Chemical X is lethal if its concentration in the air is 100 parts per million by volume (ppmv). The half-life of chemical X is known to be 7 hours. If I accidentally release a quantity of chemical X in my secret underground lab such that its initial concentration is 1500 ppmv, how long do I have to wait before I can enter the lab again? We are given the half-life, so we can assume exponential decay. We know the general formula will be something like Where y(t)=concentration after t hours, and y(0)=1500 The half-life is given, so we can find the value for k (it will be negative) Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  6. 1) A dangerous substance known as Chemical X is lethal if its concentration in the air is 100 parts per million by volume (ppmv). The half-life of chemical X is known to be 7 hours. If I accidentally release a quantity of chemical X in my secret underground lab such that its initial concentration is 1500 ppmv, how long do I have to wait before I can enter the lab again? We are given the half-life, so we can assume exponential decay. We know the general formula will be something like Where y(t)=concentration after t hours, and y(0)=1500 The half-life is given, so we can find the value for k (it will be negative) So our formula is: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  7. 1) A dangerous substance known as Chemical X is lethal if its concentration in the air is 100 parts per million by volume (ppmv). The half-life of chemical X is known to be 7 hours. If I accidentally release a quantity of chemical X in my secret underground lab such that its initial concentration is 1500 ppmv, how long do I have to wait before I can enter the lab again? We are given the half-life, so we can assume exponential decay. We know the general formula will be something like Where y(t)=concentration after t hours, and y(0)=1500 The half-life is given, so we can find the value for k (it will be negative) So our formula is: When is the concentration 100? Set y=100 and solve for t. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  8. 1) A dangerous substance known as Chemical X is lethal if its concentration in the air is 100 parts per million by volume (ppmv). The half-life of chemical X is known to be 7 hours. If I accidentally release a quantity of chemical X in my secret underground lab such that its initial concentration is 1500 ppmv, how long do I have to wait before I can enter the lab again? We are given the half-life, so we can assume exponential decay. We know the general formula will be something like Where y(t)=concentration after t hours, and y(0)=1500 The half-life is given, so we can find the value for k (it will be negative) So our formula is: When is the concentration 100? Set y=100 and solve for t. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  9. 2) Sally is saving for the down payment on a house. She already has $10,000 in her savings account, and figures that she will need $50,000 for the down payment. Assuming she earns a 4% annual interest rate (compounded continuously), how much should she deposit in her account each year (again, continuously) to end up with enough money for the down payment after 5 years? Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  10. with initial value 2) Sally is saving for the down payment on a house. She already has $10,000 in her savings account, and figures that she will need $50,000 for the down payment. Assuming she earns a 4% annual interest rate (compounded continuously), how much should she deposit in her account each year (again, continuously) to end up with enough money for the down payment after 5 years? We can set up a DE for the account balance. If y(t)=$ in the account after t years, then Here d is the annual deposit amount. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  11. with initial value 2) Sally is saving for the down payment on a house. She already has $10,000 in her savings account, and figures that she will need $50,000 for the down payment. Assuming she earns a 4% annual interest rate (compounded continuously), how much should she deposit in her account each year (again, continuously) to end up with enough money for the down payment after 5 years? We can set up a DE for the account balance. If y(t)=$ in the account after t years, then Here d is the annual deposit amount. This DE is first-order, linear, and separable. So we have lots of options for solving it. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  12. with initial value 2) Sally is saving for the down payment on a house. She already has $10,000 in her savings account, and figures that she will need $50,000 for the down payment. Assuming she earns a 4% annual interest rate (compounded continuously), how much should she deposit in her account each year (again, continuously) to end up with enough money for the down payment after 5 years? We can set up a DE for the account balance. If y(t)=$ in the account after t years, then Here d is the annual deposit amount. This DE is first-order, linear, and separable. So we have lots of options for solving it. Let’s use an integrating factor. We need to rewrite the equation in standard form: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  13. with initial value 2) Sally is saving for the down payment on a house. She already has $10,000 in her savings account, and figures that she will need $50,000 for the down payment. Assuming she earns a 4% annual interest rate (compounded continuously), how much should she deposit in her account each year (again, continuously) to end up with enough money for the down payment after 5 years? We can set up a DE for the account balance. If y(t)=$ in the account after t years, then Here d is the annual deposit amount. This DE is first-order, linear, and separable. So we have lots of options for solving it. Let’s use an integrating factor. We need to rewrite the equation in standard form: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  14. with initial value 2) Sally is saving for the down payment on a house. She already has $10,000 in her savings account, and figures that she will need $50,000 for the down payment. Assuming she earns a 4% annual interest rate (compounded continuously), how much should she deposit in her account each year (again, continuously) to end up with enough money for the down payment after 5 years? We can set up a DE for the account balance. If y(t)=$ in the account after t years, then Here d is the annual deposit amount. This DE is first-order, linear, and separable. So we have lots of options for solving it. Let’s use an integrating factor. We need to rewrite the equation in standard form: Multiply through by µ, then integrate and solve for y: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  15. with initial value 2) Sally is saving for the down payment on a house. She already has $10,000 in her savings account, and figures that she will need $50,000 for the down payment. Assuming she earns a 4% annual interest rate (compounded continuously), how much should she deposit in her account each year (again, continuously) to end up with enough money for the down payment after 5 years? We can set up a DE for the account balance. If y(t)=$ in the account after t years, then Here d is the annual deposit amount. This DE is first-order, linear, and separable. So we have lots of options for solving it. Let’s use an integrating factor. We need to rewrite the equation in standard form: Use the initial value to find C: Multiply through by µ, then integrate and solve for y: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  16. with initial value 2) Sally is saving for the down payment on a house. She already has $10,000 in her savings account, and figures that she will need $50,000 for the down payment. Assuming she earns a 4% annual interest rate (compounded continuously), how much should she deposit in her account each year (again, continuously) to end up with enough money for the down payment after 5 years? We can set up a DE for the account balance. If y(t)=$ in the account after t years, then Here d is the annual deposit amount. This DE is first-order, linear, and separable. So we have lots of options for solving it. Let’s use an integrating factor. We need to rewrite the equation in standard form: Use the initial value to find C: Multiply through by µ, then integrate and solve for y: So our solution becomes: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  17. with initial value 2) Sally is saving for the down payment on a house. She already has $10,000 in her savings account, and figures that she will need $50,000 for the down payment. Assuming she earns a 4% annual interest rate (compounded continuously), how much should she deposit in her account each year (again, continuously) to end up with enough money for the down payment after 5 years? We can set up a DE for the account balance. If y(t)=$ in the account after t years, then Here d is the annual deposit amount. This DE is first-order, linear, and separable. So we have lots of options for solving it. Let’s use an integrating factor. We need to rewrite the equation in standard form: Use the initial value to find C: Multiply through by µ, then integrate and solve for y: So our solution becomes: Now we need to find the d that will give $50,000 at t=5. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  18. 3) My cup of coffee this morning was initially 90 degrees celsius, and after 15 minutes it was 70 degrees Celsius. If the room temperature is 20 degrees Celsius, how long will I have to wait until my coffee is at my ideal drinking temperature of 60 degrees Celsius? Assume that the coffee cools according to Newton’s law of cooling. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  19. 3) My cup of coffee this morning was initially 90 degrees celsius, and after 15 minutes it was 70 degrees Celsius. If the room temperature is 20 degrees Celsius, how long will I have to wait until my coffee is at my ideal drinking temperature of 60 degrees Celsius? Assume that the coffee cools according to Newton’s law of cooling. T(t)=temperature at time t M=ambient (constant)temperature For heating or cooling the DE is Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  20. 3) My cup of coffee this morning was initially 90 degrees celsius, and after 15 minutes it was 70 degrees Celsius. If the room temperature is 20 degrees Celsius, how long will I have to wait until my coffee is at my ideal drinking temperature of 60 degrees Celsius? Assume that the coffee cools according to Newton’s law of cooling. T(t)=temperature at time t M=ambient (constant)temperature For heating or cooling the DE is In our problem M=20 and we also know two values for T: T(0)=90 and T(15)=70 Time in minutes Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  21. 3) My cup of coffee this morning was initially 90 degrees celsius, and after 15 minutes it was 70 degrees Celsius. If the room temperature is 20 degrees Celsius, how long will I have to wait until my coffee is at my ideal drinking temperature of 60 degrees Celsius? Assume that the coffee cools according to Newton’s law of cooling. T(t)=temperature at time t M=ambient (constant)temperature For heating or cooling the DE is In our problem M=20 and we also know two values for T: T(0)=90 and T(15)=70 Time in minutes Note that our DE is first-order, linear and separable, so we have lots of options. Let’s try separation this time. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  22. 3) My cup of coffee this morning was initially 90 degrees celsius, and after 15 minutes it was 70 degrees Celsius. If the room temperature is 20 degrees Celsius, how long will I have to wait until my coffee is at my ideal drinking temperature of 60 degrees Celsius? Assume that the coffee cools according to Newton’s law of cooling. T(t)=temperature at time t M=ambient (constant)temperature For heating or cooling the DE is In our problem M=20 and we also know two values for T: T(0)=90 and T(15)=70 Time in minutes Note that our DE is first-order, linear and separable, so we have lots of options. Let’s try separation this time. Note that the constant C in the last line will not be the same number as in the previous lines, but since it is arbitrary, we can still just call it C. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  23. 3) My cup of coffee this morning was initially 90 degrees celsius, and after 15 minutes it was 70 degrees Celsius. If the room temperature is 20 degrees Celsius, how long will I have to wait until my coffee is at my ideal drinking temperature of 60 degrees Celsius? Assume that the coffee cools according to Newton’s law of cooling. T(t)=temperature at time t M=ambient (constant)temperature For heating or cooling the DE is In our problem M=20 and we also know two values for T: T(0)=90 and T(15)=70 Time in minutes Note that our DE is first-order, linear and separable, so we have lots of options. Let’s try separation this time. We can use the initial value to find C. Now our solution is Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  24. 3) My cup of coffee this morning was initially 90 degrees celsius, and after 15 minutes it was 70 degrees Celsius. If the room temperature is 20 degrees Celsius, how long will I have to wait until my coffee is at my ideal drinking temperature of 60 degrees Celsius? Assume that the coffee cools according to Newton’s law of cooling. T(t)=temperature at time t M=ambient (constant)temperature For heating or cooling the DE is In our problem M=20 and we also know two values for T: T(0)=90 and T(15)=70 Time in minutes Note that our DE is first-order, linear and separable, so we have lots of options. Let’s try separation this time. Using T(15)=70 we can find k We can use the initial value to find C. Now our solution is Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  25. 3) My cup of coffee this morning was initially 90 degrees celsius, and after 15 minutes it was 70 degrees Celsius. If the room temperature is 20 degrees Celsius, how long will I have to wait until my coffee is at my ideal drinking temperature of 60 degrees Celsius? Assume that the coffee cools according to Newton’s law of cooling. T(t)=temperature at time t M=ambient (constant)temperature For heating or cooling the DE is In our problem M=20 and we also know two values for T: T(0)=90 and T(15)=70 Time in minutes Note that our DE is first-order, linear and separable, so we have lots of options. Let’s try separation this time. Using T(15)=70 we can find k Our final formula is thus We can use the initial value to find C. Now our solution is Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  26. 3) My cup of coffee this morning was initially 90 degrees celsius, and after 15 minutes it was 70 degrees Celsius. If the room temperature is 20 degrees Celsius, how long will I have to wait until my coffee is at my ideal drinking temperature of 60 degrees Celsius? Assume that the coffee cools according to Newton’s law of cooling. T(t)=temperature at time t M=ambient (constant)temperature For heating or cooling the DE is In our problem M=20 and we also know two values for T: T(0)=90 and T(15)=70 Time in minutes Note that our DE is first-order, linear and separable, so we have lots of options. Let’s try separation this time. Using T(15)=70 we can find k Our final formula is thus We can use the initial value to find C. Finally we can answer our question – set T=60 and solve Now our solution is Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  27. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  28. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? Mixing problems will always have the same basic form for their DE: Total Rate = (Rate In) – (Rate Out) saltwater input saltwater output Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  29. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? Mixing problems will always have the same basic form for their DE: Total Rate = (Rate In) – (Rate Out) saltwater input The input and output rates will typically be calculated as (concentration) x (flow rate) saltwater output Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  30. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? Mixing problems will always have the same basic form for their DE: Total Rate = (Rate In) – (Rate Out) saltwater input The input and output rates will typically be calculated as (concentration) x (flow rate) In this case we are keeping track of grams of salt, so concentration should have units of grams/liter. saltwater output Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  31. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? Mixing problems will always have the same basic form for their DE: Total Rate = (Rate In) – (Rate Out) saltwater input The input and output rates will typically be calculated as (concentration) x (flow rate) In this case we are keeping track of grams of salt, so concentration should have units of grams/liter. saltwater output The input is straightforward: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  32. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? Mixing problems will always have the same basic form for their DE: Total Rate = (Rate In) – (Rate Out) The input and output rates will typically be calculated as (concentration) x (flow rate) In this case we are keeping track of grams of salt, so concentration should have units of grams/liter. saltwater output The input is straightforward: Output is trickier, because the concentration is not constant. As more saltwater is poured in, the concentration increases. Also, the volume of water in the tank is not constant. Before we can find the output rate we need to define our variables. Define x(t)=grams of salt in tank after t minutes The water in the tank starts at 100 liters, but then increases by 5 liters each minute (10L in, 5L out) So the amount of water in the tank is 100+5t Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  33. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? Mixing problems will always have the same basic form for their DE: Total Rate = (Rate In) – (Rate Out) The input and output rates will typically be calculated as (concentration) x (flow rate) In this case we are keeping track of grams of salt, so concentration should have units of grams/liter. saltwater output The input is straightforward: Now we can write down the output rate: Output is trickier, because the concentration is not constant. As more saltwater is poured in, the concentration increases. Also, the volume of water in the tank is not constant. Before we can find the output rate we need to define our variables. Define x(t)=grams of salt in tank after t minutes The water in the tank starts at 100 liters, but then increases by 5 liters each minute (10L in, 5L out) So the amount of water in the tank is 100+5t Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  34. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? Mixing problems will always have the same basic form for their DE: Total Rate = (Rate In) – (Rate Out) The input and output rates will typically be calculated as (concentration) x (flow rate) In this case we are keeping track of grams of salt, so concentration should have units of grams/liter. The input is straightforward: Now we can write down the output rate: Output is trickier, because the concentration is not constant. As more saltwater is poured in, the concentration increases. Also, the volume of water in the tank is not constant. Before we can find the output rate we need to define our variables. Define x(t)=grams of salt in tank after t minutes Now we have the DE: The water in the tank starts at 100 liters, but then increases by 5 liters each minute (10L in, 5L out) So the amount of water in the tank is 100+5t Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  35. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? This is first-order and linear, so we have a couple of options for solving. Let’s try variation of parameters this time: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  36. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? This is first-order and linear, so we have a couple of options for solving. Let’s try variation of parameters this time: Start with the homogeneous equation. Skipped a couple steps here – let me know if you want more details Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  37. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? This is first-order and linear, so we have a couple of options for solving. Let’s try variation of parameters this time: Start with the homogeneous equation. Skipped a couple steps here – let me know if you want more details Now we get the particular solution by modifying the homogeneous solution Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  38. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? This is first-order and linear, so we have a couple of options for solving. Let’s try variation of parameters this time: Start with the homogeneous equation. Skipped a couple steps here – let me know if you want more details Now we get the particular solution by modifying the homogeneous solution quotient rule Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  39. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? This is first-order and linear, so we have a couple of options for solving. Let’s try variation of parameters this time: Start with the homogeneous equation. Plug these in to the DE: Skipped a couple steps here – let me know if you want more details Solve for v Now we get the particular solution by modifying the homogeneous solution quotient rule Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  40. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? This is first-order and linear, so we have a couple of options for solving. Let’s try variation of parameters this time: Start with the homogeneous equation. Plug these in to the DE: Skipped a couple steps here – let me know if you want more details Solve for v Now we get the particular solution by modifying the homogeneous solution quotient rule Now we have our general solution: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  41. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? We need to find a value for C. Use the initial value – x(0)=0 because we start with fresh water. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  42. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? We need to find a value for C. Use the initial value – x(0)=0 because we start with fresh water. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  43. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? We need to find a value for C. Use the initial value – x(0)=0 because we start with fresh water. Here is our final formula for the amount of salt in the tank. Now we can answer the question – all we need now is to figure out when the tank is full, then plug that in for t. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  44. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? We need to find a value for C. Use the initial value – x(0)=0 because we start with fresh water. Here is our final formula for the amount of salt in the tank. Now we can answer the question – all we need now is to figure out when the tank is full, then plug that in for t. Recall our formula for the amount of water in the tank, and set it to 1000 liters: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

  45. 4) A tank with capacity 1000 liters is initially filled with 100 liters of fresh water. Salt water with a concentration of 6 grams of salt per liter is poured into the tank at a rate of 10 liters per minute. The well stirred mixture flows out of the tank at a rate of 5 liters per minute. Note that the volume of water in the tank will be increasing until the tank is full. What will the concentration of salt be at the moment the tank is full? We need to find a value for C. Use the initial value – x(0)=0 because we start with fresh water. Here is our final formula for the amount of salt in the tank. Now we can answer the question – all we need now is to figure out when the tank is full, then plug that in for t. Recall our formula for the amount of water in the tank, and set it to 1000 liters: To get the concentration, divide by 1000 liters: Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB

More Related