1 / 40

Life Cycle Assessment of flax fibre for the reinforcement of composites

Life Cycle Assessment of flax fibre for the reinforcement of composites. Nilmini Dissanayake, John Summerscales, Stephen Grove and Miggy Singh. Fibre-reinforced composites: typical applications. J-boats Poma-Otis mass transit Images from www.tpicomp.com

cheche
Télécharger la présentation

Life Cycle Assessment of flax fibre for the reinforcement of composites

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Life Cycle Assessment of flax fibre for the reinforcement of composites Nilmini Dissanayake,John Summerscales, Stephen Grove and Miggy Singh

  2. Fibre-reinforced composites:typical applications J-boats Poma-Otis mass transit Images from www.tpicomp.com Reitnouer flat bed trailer NABI 30-foot bus

  3. Content • Flax • Life Cycle Assessment (LCA) • goal and scope • system boundaries • Life Cycle Inventory analysis (LCI) • 3 scenarios • energy • Environmental Impact Classification Factors (EICF) • Life Cycle Impact Assessment (LCIA) - results • Conclusions

  4. Flax • Linum usitatissimum • temperate zone plant • flax – grown for fibre linseed – grown for seed oil • sown in March-May in UK • life cycle of the plant 45-60 day vegetative period 15-25 day flowering period 30-40 day maturation period

  5. Why Flax ? • flax is the most agro-chemical intensive bast fibre used as reinforcement • other bast fibres may be “greener”provided yield/hectare andperformance/durability are satisfactory

  6. Growth stages • Life cycle of the flax plant consists of • a 45 to 60 day vegetative period, • a 15 to 25 day flowering period and • a maturation period of 30 to 40 days • From J A Turner “Linseed Law” BASF (UK) Limited, 1987via http://www.flaxcouncil.ca/images UK harvest

  7. Flax grown on campus • 4 x 4 x 2 replicates behind Portland Villas • three fertilisers (N, P, K) or none • 0, 0.5, 1.0 or 2.0 times recommended level •  no significant differences (soil too good ?)

  8. Flax: from plant to fibre • tillage and growth • harvest (combining or pulling) • retting (dew-, wet-, stand- or enzyme-retting) • enzymes (e.g. pectinase digests pectin binder) • decortication/scutching (hammer mill, fluted rollers, willower) • cleaning (removal of shive) • carding (brushing/combing aligns fibres) > sliver • spinning (twisting binds fibres) > yarn/filament

  9. Life Cycle Assessment (LCA) Interpretation Goal and Scope Definition Inventory Analysis Impact Assessment

  10. Goal and Scope • To determine the sustainability of natural fibres as reinforcement in polymer matrix composites (referenced to glass fibres) • Cradle-to-factory gate • agricultural operations (from ploughing to harvest) • fibre extraction operations (retting and decortication) • fibre preparation operations (hackling and carding) • fibre processing operations (spinning or finishing) • The functional unit : “one tonne of flax fibres for reinforcement in polymer matrix composites” (assumes Eflax = 42 GPa  equal specific modulus) • Co-products allocated burdens only for post-separation handling

  11. System Boundaries seed, fertiliser, pesticides, diesel machinery Crop Production Dry, green flax stems Retting diesel, machinery, water Dry, retted flax atmospheric emissions, emissions into water, co-products and waste Scutching electricity Scutched long fibre Hackling electricity SLIVER Wet Spinning electricity, water YARN

  12. Life Cycle Inventory (LCI) Three scenarios linking different tillage and retting methods: • No-till & water retting - minimum impact? 2. Conservation till (chisel) & stand/dew retting - average impact? 3. Conventional till (mouldboard) & bio-retting - maximum impact?

  13. Tillage Methods

  14. Fibre Processing

  15. Mass loss during the production < Sliver

  16. LCI results – energy consumption

  17. Energy consumption - breakdown Scenario 1- Sliver (54 GJ/tonne)

  18. LCI results – energy consumption

  19. Energy consumption - breakdown Scenario 1- Yarn (80GJ/tonne)

  20. Energy consumption

  21. Energy consumption UK: http://www.decc.gov.uk/en/content/cms/statistics/fuel_mix/fuel_mix.aspx France:http://ieepa.org/news/Other/20100917174353200.pdf

  22. Environmental Impact Classification Factors From Adisa Azapagic (and ISO 14047) Acidification Potential (AP) Aquatic Toxicity Potential (ATP) – ecotoxicity Eutrophication Potential (EP) - nitrification Global Warming Potential (GWP) - climate change Human Toxicity Potential (HTP) Non-Renewable/Abiotic Resource Depletion Potential (NRADP) Ozone Depletion Potential (ODP) Photochemical Oxidants Creation Potential (POCP) – smog Draft BS8905 adds “land use”

  23. EICF definitions I • Acidification Potential (AP)consequence of acids (and other compounds which can be transformed into acids)being emitted to the atmosphere and subsequently deposited in  surface soils and water • Aquatic Toxicity Potential (ATP)– ecotoxicitybased on the maximum tolerable concentrations of different toxic substances in water by aquatic organismswhat about insects and birds ? • Eutrophication Potential (EP)– nitrificationthe potential of nutrients to cause over-fertilisation of water and soil which in turn can result in increased growth of biomass • Global Warming Potential (GWP)- climate changecaused by the atmosphere's ability to reflect some of the heat radiated from the earth's surface:reflectivity is increased by the greenhouse gases (GHG) in the atmosphererelatively difficult to quantify climate change

  24. EICF definitions II • Human Toxicity Potential (HTP)persistent chemicals reaching undesirable concentrations in each of the three elements of the environment (air, soil and water) leading to damage to humans, animals and eco-systems • Non-Renewable/Abiotic Resource Depletion Potential (NRADP)depletion of fossil fuels, metals and minerals • Ozone Depletion Potential (ODP)potential for emissions of chlorofluorocarbon (CFC) compounds and other halogenated hydrocarbons to deplete the ozone layer • Photochemical Oxidants Creation Potential (POCP)– summer smogrelated to the potential for VOCs and oxides of nitrogen to generate photochemical or summer smog

  25. Environmental Impact for Flax fibre : See also http://www.netcomposites.com/downloads/03Thurs_Summerscales.pdf - slide 15

  26. Life Cycle Inventory Analysis (LCI)

  27. Life Cycle Impact Assessment – LCIA methodology In the impact assessment interpretation of the LCI data, Environmental impact potential, where: Bjx = burden (release of emission j or consumption of resource j per functional unit) ec1= characterisation factor for emission j continues …

  28. Non-renewable/abiotic resource depletion potential is calculated using : Where: Bj = burden (consumption of resource j per functional unit) ec1= estimated total world reserves of resource j. As defined by Adisa Azapagic et al (2003, 2004) in Polymers, the Environment and Sustainable Development and Sustainable Development in practice –case studies for engineers and scientists

  29. Life Cycle Impact Assessment (LCIA) For the production of flax sliver continues …

  30. Life Cycle Impact Assessment (LCIA) For the production of flax yarn

  31. No-till/water-ret flax vs glass fibres… GF data from Sustainability at Owens Corning – 2008 Summary Progress Report

  32. This study did not address: • sequestration of CO2 • use phase – assumed comparable to glass • disposal – flax could be compostedbut degradation leads to “biogas [which] is typically 60-65% methane, 35% carbon dioxide and a small amount of other impurities” [Jana et al, 2001] S Jana, NR Chakrabarty and SC Sarkar, Removal of Carbon Dioxide from Biogas for Methane Generation, Journal of Energy in Southern Africa, August 2001, 12(3).

  33. A Le Duigou et al, JBMBE, 2011. • environmental impact analysis onFrench flax fibers using different underlying assumptionsto Dissanayake et al for UK fibersconcluded that“without the allocation procedurethe results from the two studieswould be similar.”

  34. Le Duigou vs Dissanayake key differences • UK plants desiccated at mid-point flowering but French plants allowed to set seed • UK yield only 6000 kg/ha but French yield 7500 kg/ha at harvest • UK study excluded photosynthesis and CO2 sequestration • Higher level of nuclear power in the French energy mix • UK study allocated all burdens to fiberFrench study allocated on mass of product and co-products

  35. Conclusions I • no-till and water retting scenario • lowest global warming potential • using bio-retting process • increased global warming • reduced eutrophication, acidification and toxicity • fibre mass as % green flax stems • 5% in bio-retting • 4% in water retting • 2% in dew retting • the embodied energies for flax (no-till agriculture): • 54 GJ/tonne for sliver(55 GJ/tonne for glass mat) • 80 GJ/tonne for yarn(32 GJ/tonne for continuous glass)

  36. However …. • Analysis uses 100% burden to long fibre • Economic apportionment:If long fibre = 10% weight at 90 p/kgand short fibre/dust = 90% at 10p/kg,then burdens on long fibre halved • Mass apportionment (indefensible?), then long fibre burden reduced to 10%

  37. Burdens from … minimum <average < maximum • no till <conservation agriculture<mouldboard plough • organic fertiliser <agro-chemicals • biological control of pests<pesticides • water- <dew- <bio-retting • sliver <spun yarn

  38. Conclusions II • the validity of the “green” case for substitution of glass fibres by natural fibres is dependent on the chosen reinforcement form and associated processes • no-till with water retting is identified as the most environmental friendly option • conservation agriculture, organic fertiliser and biological control of pests will improve environmental credentials of flax

  39. PhD thesis as free download: http://pearl.plymouth.ac.uk/handle/10026.1/483

  40. Thank you for your attention. Any questions? http://www.tech.plym.ac.uk/sme/acmc/lca.htm

More Related