1 / 49

Construction Technology-1

Construction Technology-1. STAIRS & STAIRCASES (SECTION II). Text & Ref Book. Building Construction by A.S. Kotadia Building Construction by B.C. Punmia. 1. Definition

cheng
Télécharger la présentation

Construction Technology-1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Construction Technology-1 STAIRS & STAIRCASES (SECTION II)

  2. Text & Ref Book • Building Construction by A.S. Kotadia • Building Construction by B.C. Punmia

  3. 1. Definition A stair is a set (series) of steps, leading from one floor to the other, provided to afford the various floors of a building.

  4. 2. Technical terms • 1. Tread- Upper horizontal portion of a step upon which the foot is placed, while ascending or descending. • 2. Riser- Vertical portion of a step providing a support to the tread. • 3. Landing- Level platform at the top or bottom of a flight between the floors. • 4. Flight- An unbroken series of steps b/w landings.

  5. Technical terms (cont.,) • 5. Rise- Vertical distance b/w two successive tread faces. • 6. Going- Horizontal distance b/w two successive riser faces. • 7. Nosing- Outer projecting part of a tread beyond the face of the riser • 8. Scotia- Moulding provided under the nosing to improve the elevation of the step & strength to nosing.

  6. Technical terms (cont.,) • 9. Pitch/Slope- the angle made by the line of nosing of the stair with the horizontal. • 10. Strings/Stringers- Sloping members of wood/metal which support the steps in a stair. They run along the slope of the stair. • 11. Newel post- Vertical member of wood/metal, supporting the hand rail. • 12. Baluster- Vertical member of wood/metal supporting the handrail.

  7. Technical terms (cont.,) • 13. Handrail- Rounded/moulded member of wood/metal, generally parallel to the nosing line and fixed on the top of balusters. • 14. Head room- Min clear vertical distance b/w the tread of a step and the soffit of the flight immediately above it. • 15. Run- Total length of stairs in a horizontal plane.

  8. 3. Requirements of a GOOD Stair • 1. Location - Provide easy access to the users of the building. - Well lighted & ventilated. - Approaches convenient & spacious • 2. Width of Stair - Domestic/ residential building = 900 mm. - Public building = 1500-1800 mm • 3. Length of flight - No. of steps should not more than 12 nos. should not less than 3 nos.

  9. Requirements of a GOOD Stair (cont.,) • 4. Pitch/ Slope of Stair - should not more than 40◦ - should not less than 20◦ • 5. Headroom - vertical distance b/w the tread and soffit of the flight immediately above it, should not less than 2100-2300mm • 6. Balustrade - Open well stair should always provided with this for safety - A wide stair should have a handrail on both the sides

  10. Requirements of a GOOD Stair (cont.,) • 7. Step Dimensions - Width of landing should not less than width of stairs. • 8. Materials of Construction - Materials should provide a sufficient strength, fire resistance.

  11. 4. Fixing of ‘Going’ and ‘Rise’ of a Step Or Dimensions of a Step • 1. The design of steps should be carefully worked out, so as not to make either too wide or short. • 2. Thumb rules a. (Rise + Going) = 400- 450mm b. (2Rise + Going) = 600mm • 3. Combinations of Rise x Going 140 x 300 mm, 150 x 280mm, 160 x 260mm, 170 x 240mm • 4. For Residential building-size of steps= 160 x 260mm • 5. For hospital, public buildings- size of steps= 100 x 300mm

  12. 5. Types of STEPS • 1. Flier- ordinary step of uniform width and rectangular shape in plan. Newel Post Wall Newel Post UP

  13. Newel Post • 2. Bull nose step- Starting step near the newel forms the quadrant of a circle. Wall Newel Post Quadrant of a circle UP

  14. Newel Post • 3. Round ended step- similar to bull nose except that it has a semi-circular end which projects out from the stringer. Wall Newel Post Semi-circle UP

  15. Newel Post • 4. Splayed step- beginning of the flight, with its end, near the newel post, splayed like in fig below Wall Newel Post Splayed edge UP

  16. Newel Post • 5. Commode step- has curved tread and riser Wall Newel Post Curved edge UP

  17. Landing • 6. Dancing step- which do not radiate from a common centre Dancing Step UP

  18. Winders • 7. Winder- Winders are tapering steps, such as those radiate from a point usually situated at the centre of a newel. UP

  19. 6. Classification of STAIRS • Straight flight stairs • Turning stairs • Quarter turn stairs • Half turn stairs • Dog-legged stairs • Open-well stairs • Three quarter turn stairs • Bifurcated stairs • Geometrical stairs • Circular stairs • Spiral stairs • Helical stairs

  20. 1. Straight flight stairs- running continuous throughout their entire length in one direction only. • Used for small houses where long but narrow space is available.

  21. 2. Turning stairs- a) Quarter turn stairs • The direction of flight changes at right angles to the left/right. There are two types 1. With quarter space landing 2. With winders

  22. 2. Turning stairs- b) Half turn stairs- turned by 180◦ • i. Dog-legged stairs • Used when the length of the staircase is restricted and width is such that only two flights can be accommodated. • There is no space b/w the two flights.

  23. 2. Turning stairs- b) Half turn stairs • ii. Open-well stairs • Open space b/w the outer string of the flights • Needs additional space b/w The flights • Space= 150-1000 mm

  24. 2. Turning stairs- c) Three quarter turn stairs • The direction of the flight is changed 3 times. • Used when the length and breadth of the stair room is limited • Also the vertical distance b/w two floors quite large.

  25. 2. Turning stairs- d) Bifurcated stairs • Used in public buildings at their entrance hall & in palaces. • The stair has a wider flight at the bottom, which bifurcates into two narrow flights, one turning to the left and the other to the right

  26. 3. Geometrical stairs- a) Circular stairs • In this type, stringers as well as handrails are both continuous w/o any newel post and landing. • Commonly provided at the inner & backside of the building for providing entry to its various floors for service purposes.

  27. 3. Geometrical stairs- b) Spiral stairs • Used, where space available is too small and the traffic is less. • Used, as a emergency stairs and are provided at the backside of the building. • Usually made either of RCC or metal. • All the steps are winders, joined centrally with the vertical newel post/ column.

  28. 3. Geometrical stairs- c) Helical stairs • The stair looks fine but its structural design and construction is very complicated. • It is made of RCC/metal in which large quantities of steel is required to resist bending, shear and torsion.

  29. 7. Vertical Transportation Systems Peoples and various objects must be moved vertically in multi-level buildings, often required the use of special equipments such as 1. Elevators (lifts), 2. Escalators.

  30. 7.1. Elevators (Lifts) • Used for moving both people and materials in buildings having more than 4 storey's. • People movers are described as Passenger lifts. • The lifts used for moving materials are called Freight lifts. • For powering of the vertical movements-two basic systems • Overhead counter weighted suspension system using steel cables and electrically powered motors and wheels. • Large hydraulic piston provided in a chamber beneath the elevator cab.

  31. 7. The elevator shaft must be vertically aligned and the elevator cabs move along vertical guide rails. • 8. The mechanical operation of the moving cabs, the entry doors and the operating equipment for moving the cab must be properly provided. • The dimensional requirements for lifts may depends upon the cab size and the total no. of elevators used in the system. • For a small two or three storey building with a single lift, the space required be small vice versa for tall buildings.

  32. Overhead suspended Lift Vs Hydraulic Lift Relatively rapid travel and 1. Operate slowly quicker operation. Suitable for tall buildings 2. Used for few stories only Need, considerable height 3. Space reqd at bottom level above the highest point of entry of the cab. Both the systems require considerable excavation and construction below the level of the lowest entry point of the cab.

  33. 7.2. Escalators • An escalator is a power driven, continuous moving stairway designed to transport passengers up and down short vertical distances (inclined). • Escalators are used in shopping centres, hotels and public buildings. • Escalators move at approx. 0.3– 0.6 m/s. • Max angle of inclination of an escalator 30◦

  34. 7.2. Escalators- Components • Top & bottom landing platforms • Curved sections of the tracks, as well as gears and motors that drive the stairs. • The top platform contains the motor assembly and the main drive gear. • Whereas, the bottom holds the step return idler. • The platforms contain a floor plate and a comb plate. • Floor plate- provides a place for the passengers to stand before they step onto the moving stairs. • Comb plate- the piece b/w the stationary floor plate and the moving step.

  35. 2. The truss • It is a hollow metal structure that bridges the lower and upper landings. • It is composed of two side sections joined together with cross braces across the bottom and just below the top. • The ends of the truss are attached to the top and bottom landing platforms via steel/ concrete supports. • The truss carries all the straight track sections connecting the upper and lower sections.

  36. 3. The tracks • The track system is built into the truss to guide the step chain, which continuously pulls the steps from the bottom platform and back to the top in an endless loop. • There are two tracks-one for the front wheels of the steps (called the step wheel track)- another for the back wheels of the steps (the trailer-wheel track) • The tracks carry the steps down along the underside of the truss until they reach the bottom landing, where they pass through another curved section track before existing the bottom landing.

  37. 4. The steps • The steps are solid, one-piece, aluminum. • Rubber mats affixed to their surface to reduce slippage, and yellow lines added to indicate their edges. • The steps are linked by a continuous metal chain so they form a closed loop with each step. • The position of the track controls the orientation of the steps.

  38. 5. The railing • It provides a convenient handhold for passengers. • 4-distinct sections • Slider- allow the railing to move smoothly along its track. • Tension member- consists of steel cable, which provides the handrail with the necessary tensile strength and flexibility.

  39. Treated rubber- on top of tension member are the inner construction components, which are made of chemically treated rubber designed to prevent the layers from separating. • The outer layer- only part actually passengers see, is the rubber cover. This cover designed to resist degradation from environmental conditions, mechanical wear and tear, and human vandalism.

  40. Stair- Planning- Numerical Problem • 1. Plan a staircase for a residential building in which the vertical distance b/w each floor is 3.96 m. The size of stair hall is limited to 4.64 x 3.24 m. • (Tread, Rise, Width of stair , Width of Landing, width of passage) • Solution:- 300 mm 4.64 m 3.24 m

  41. Let us take Width of the stair/flight = 1.20 m • Space b/w two flights = 3.24 – 2(1.2) = 0.84 m • this suggests can provide “Open Well Type Stair” • Let the height of Riser = 180 mm = 0.18 m • No. of risers/flight = (1/2)*(3.96/0.18) = 11 nos. • i.e., No. of treads/flight = 11-1 = 10 nos. • Keeping width of tread = 280 mm and • width of landing = width of stair = 1.20 m • Horizontal distance reqd to accommodate 10 nos. of treads • = (0.28 x 10) + (1.2) = 4 m • i.e, Width of passage= 4.64 – 4 = 0.64 m (Not sufficient)

  42. We can accommodate 3 treads, each of 280 mm., which is equal to the width of Well. • So provide 8 treads in each flight. • i.e., Total treads= 8+3+8= 19 nos. • The stair will be a quarter space landing. • Total no. of risers= 19 + 3 = 22 nos. • i.e., ht of rise = 3.96/22 = 180 mm • TREAD = 280 mm • RISE = 180 mm

  43. Horizontal space reqd for 8 treads= 8 x 0.28 = 2.24 m • i.e., width of passage hall = 4.64- (2.24 +1.2) = 1.20 m (OK) • Final Plan

  44. Assignment Questions Submit- class notes Last date of Sub: 07.09.2013 (Saturday) @ 2 p.m.

More Related