1 / 16

GTR-Development for H2- and FC-Vehicles a TÜV SÜD - opinion

SGS 4 - 09. GTR-Development for H2- and FC-Vehicles a TÜV SÜD - opinion. Some Thoughts on 1. Approval 2. GTR-Development. 1. Approval. One of the most important Rules in Safety Technology:. Prevention is better than cure.

cher
Télécharger la présentation

GTR-Development for H2- and FC-Vehicles a TÜV SÜD - opinion

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SGS 4 - 09 GTR-Development for H2- and FC-Vehiclesa TÜV SÜD - opinion

  2. Some Thoughts on1. Approval2. GTR-Development

  3. 1. Approval

  4. One of the most important Rules in Safety Technology: Prevention is better than cure Abteilung:

  5. Someexperiences in the last 5 yearswith CNG- and LPG-vehicles in Europe: • - 6 burstincidents (Saarland-CNG, Recklinghausen-LPG, Emmendingen-LPG, Speyer-LPG, Brescia-CNG, France-CNG) • - reasons: positionof PRD, LPG-tank was filledat a CNG-station, missing PRD, failingsolenoidvalve, toosmallorificeof PRD-ventline • 3 crashincidentswith LPG-vehicles (Rinteln, Dülmen, Thalwil-CH) • Noburstofcontainers Abteilung:

  6. IV Design, Characteristics, Compatibility, Durability (Pressure, Temperature, Media, Acceleration, Ambient Conditions…) III Component II I System Abteilung:

  7. IV Component Safety III Components II I System Safety System Abteilung:

  8. IV Component Testing III Design, Characteristics, Compatibility, Durability (Pressure, Temperature, Media, Acceleration, Ambient Conditions…) Components II I System Inspection System Safety, System Abteilung:

  9. AccidentPrevention IV Design, Characteristics, Compatibility, Durability (Pressure, Temperature, Media, Acceleration, Ambient Conditions…) III Components II I Limitation of Consequences System Abteilung:

  10. Accident Prevention Limitation of Consequences Component Safety Component Testing Components II I System Safety IV System System Inspection III Abteilung:

  11. 2. GTR-Development

  12. DRAFT STRUCTURE of HFCV-GTR, SGS 3-10, dated 2008-05-15 I. Storage system provisions II. Vehicle fuel system integrity provisions III. Electric safety Abteilung:

  13. components and system requirements? Questions arised during GTR-Discussions: I. Storage system provisions 1. Scope and Purpose 2. Application 3. Definitions 4. General Requirements 5. Performance Requirements 6. Test conditions and procedures 7. Annexes  Which components? Container, valve, PRD, filling device? Functional safety/quality of ECUs? protection against overpressure Potential ignition sources Mechanical protection, … Part I or II? Who is adressed? Component manufacturer or vehicle/system manufacturer? … Documentation? Burst ratios, fire protection, …

  14. Proposal: Part I: basic requirements for accident prevention for system and components I. Storage system provisions 1. Scope and Purpose 2. Application 3. Definitions 4. General Requirements 5. Performance Requirements 6. Test conditions and procedures 7. Annexes  System and component requirements CGH2 and LH2 H2-system excluding propulsion s. or other consumers System, e.g. mechanical, electrical, functional r. Components, e.g. P, T, Material, Media, function, etc. System, e.g. overpressure/temperature, leakage, ignition sources, single failure, monitoring, vehicle integration, shut off strategy Components (container, valve, PRD, filling device) Documentation system Documentation components Abteilung:

  15. Proposal: Part II: requirements and test procedures for limitation of consequences II. Vehicle fuel system integrity provisions 1. Scope and Purpose 2. Application 3. Definitions 4. General Requirements 5. Requirements and test procedures - in-use 5.1. Performance requirements 5.2. Test conditions and procedures 6. Requirements and test procedures - post crash 6.1. Performance requirements 6.2. Test conditions and procedures 7. Annexes OICA-Proposal? Further requirements, e.g. Visible inspection Tightness test Abteilung:

  16. III. Electric safety 1. Scope and Purpose 2. Application 3. Definitions 4. General Requirements 5. Requirements and test procedures - in-use 5.1. Performance requirements 5.2. Test conditions and procedures 6. Requirements and test procedures - post crash 6.1. Performance requirements 6.2. Test conditions and procedures 7. Annexes ELSA Abteilung:

More Related