1 / 23

Laser Cleaving of Optical Connectors

Introduction. The ProblemsMechanical cleaving

chi
Télécharger la présentation

Laser Cleaving of Optical Connectors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Laser Cleaving of Optical Connectors Didi Hachnochi VP Engineering & R&D Duane Dinkel President Sagitta Incorporated 655-H Fairview Road Simpsonville, SC 29680 About Sagitta Since 1997 Manufacturer of fiber optic and semi-conductor process equipmentAbout Sagitta Since 1997 Manufacturer of fiber optic and semi-conductor process equipment

    2. Introduction The Problems Mechanical cleaving – operator and tool-dependent quality (hand-scribe, sand-blasting, etc.) Epoxy Bead size – operator and process-dependent quality Polishing – sub-optimal initial conditions (overuse of consumables; costly) Connector/Fiber-specific challenges – MT, Large OD fiber, SMA’s, etc. Compromised First Pass Yield, Throughput, Quality, and Cost! The Solution Laser Cleaving (integrated denubbing and epoxy removal) Results Future Technologies Conclusion

    3. Connector Termination Process

More Related