1 / 19

P10511: Miniaturization of Xerography

P10511: Miniaturization of Xerography. Derek Meinke (ME, PM) Matthew Liff (ME) Tony Zhang (EE) Zaw Htoo (ISE). BOM (EE&ISE). High-Voltage Supplies. Outputs: Coronode: 5-8kV (constant current) Grid: -300 to -800V (constant voltage) Substrate: 0 to -800V (sweeped to specified value).

cira
Télécharger la présentation

P10511: Miniaturization of Xerography

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. P10511: Miniaturization of Xerography Derek Meinke (ME, PM) Matthew Liff (ME) Tony Zhang (EE) Zaw Htoo (ISE)

  2. BOM (EE&ISE)

  3. High-Voltage Supplies • Outputs: • Coronode: 5-8kV (constant current) • Grid: -300 to -800V (constant voltage) • Substrate: 0 to -800V (sweeped to specified value)

  4. Motor Controller • Two 68-Pin Connectors • Digital I/O for driving Voltage Supplies • Motion I/O to Motor Drive • Provides DAQ functionality • PCI connection • Requires Driver Software: NI Motion

  5. Motor Drive • Connects to 68-pin Motion I/O connector on the Controller via an internally-mapped cable • Default setting of 10 microsteps/step (2000 steps/rev for a 1.8⁰ resolution motor) • Motor connections are wired in parallel for higher speed, lower torque

  6. Stepper Motors • S83-93 for Photoreceptor Drive • Continuous spinning requires Limits disabled • S57-51 for ESV Drive • Limits will confine ESV to cover the range of a P/R length • 200 steps/rev (1.8⁰ resolution)

  7. EE Wiring Schematic • Link to Wiring Schematic

  8. User Interface

  9. ESV Readings ESV Resolution ESV Readings Per P/R Length

  10. System Flow Diagram

  11. System Logic • Running the System • User will have to input all the data • The system will run in default values • System will run once and stop • Emergency Stop

  12. PR Motor Revolution LabView Calculation Formula ESV Motor Revolution

  13. LabVIEW Block (Uniformity)

  14. Uniformity Result Summary (Excel)

  15. LabVIEW Block (I-V Slope)

  16. I-V Slope Result Summary (Excel)

  17. Feasibility Analysis

  18. Action Items • Further follow-up with Rob Kraynik on concept feasibility. • Obtain wireless PCI card from John Wellin • Finish CAD parts (charger, ESV guide, PR shaft) • Create CAD drawings • Create ME Bill of Materials • Further review Risk Assessment

  19. Further Questions?

More Related