1 / 18

Flexible Manufacturing Systems

Flexible Manufacturing Systems. Tom Foster Boise State University. Flexible Manufacturing Systems (FMS).

clemance
Télécharger la présentation

Flexible Manufacturing Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Flexible Manufacturing Systems Tom Foster Boise State University

  2. Flexible Manufacturing Systems (FMS) • An FMS is a “reprogrammable” manufacturing system capable of producing a variety of products automatically. Conventional manufacturing systems have been marked by one of two distinct features: • The capability of producing a variety of different product types, but at a high cost (e.g., job shops). • The capability of producing large volumes of a product at a lower cost, but very inflexible in terms of the product types which can be produced (e.g., transfer lines). • An FMS is designed to provide both of these features.

  3. FMS Components • Numerical Control (NC) machine tools • Automated material handling system (AMHS) • Automated guided vehicles (AGV) • Conveyors • Automated storage and retrieval systems (AS/RS) • Industrial Robots • Control Software

  4. Flexible Manufacturing System Computer control room Tools Conveyor Machine Machine Pallet Load Unload Parts Finished goods Terminal

  5. Classification of FMS-related Problems • Strategic analysis and economic justification, which provides long-range, strategic business plans. • Facility design, in which strategic business plans are integrated into a specific facility design to accomplish long-term managerial objectives. • Intermediate-range planning, which encompasses decisions related to master production scheduling and deals with a planning horizon from several days to several months in duration. • Dynamic operations planning, which is concerned with the dynamic, minute-to-minute operations of FMS.

  6. FMS Problems • Part type selection (Askin) - selecting parts that will be produced in the FMS over some relatively long planning horizon. • Part selection (Stecke) - from the set of parts that have current production requirements and have been selected for processing in the FMS, select a subset for immediate and simultaneous processing. • Machine grouping (Stecke) - partition machines into groups where each machine in a group can perform the same set of operations. • Loading (Stecke) - allocate the operations and required tools of the selected part types among the machine groups. • Control - provide instructions for, and monitor the equipment in the FMS so that the production goals identified by the above problems are met.

  7. Information Technology • Management information system (MIS) • move large amounts of data • Decision support system (DSS) • add decision making support • Expert system • recommend decision based on expert knowledge

  8. Personnel Accounting Information: Computer Production reports system: Data model results Decisions data what if? processing Marketing analysis Distribution Other areas Quantitative techniques Decision Support System Management Decision Support System Management Information System What -if? analysis

  9. Artificial Intelligence • Neural networks • emulate interconnections in brain • Genetic algorithms • based on adaptive capabilities in nature • Fuzzy logic • simulate human ability to deal with ambiguity

  10. Advanced Communications • Electronic data interchange (EDI) • Internet • Wireless communications • Teleconferencing & telecommuting • Bar coding • Virtual reality

  11. Manufacturing Technology • Numerically controlled (NC) machines • controlled by punched tape • Computer numerical controlled (CNC) • controlled by attached computer • Direct numerical control (DNC) • several NC machines controlled by single computer

  12. Automated Material Handling • Conveyors • Automated guided vehicle (AGV) • Automated storage & retrieval system (ASRS)

  13. Flexible Manufacturing Systems (FMS) • Programmable machine tools • Controlled by common computer network • Combines flexibility with efficiency • Reduces setup & queue times

  14. Robotics • Programmable manipulators • Follow specified path • Better than humans with respect to • hostile environments • long hours • consistency

  15. Robot Parts • Controller • hardware, software, power source • Manipulator • robot arm • End-effector • “hand”

  16. Computer Integrated Manufacturing (CIM) • Integration of design, manufacture & delivery via computer technology • CAD - uses software to create & modify designs • CAM - uses programmable automation in manufacturing • CAE - links functional design to CAD form design • CAPP - creates processing instructions for CAM • GT- classifies designs to benefit from prior experience

  17. CAD CAE GT DFM IGES, PDES, DMIS TQM Product design CAD/CAM Bar codes, EDI CAPP MRP CIM Systems management Process planning JIT/ kanban Cellular manufacturing DSS/ES/ AI MAP, STEP Manufacture LAN, TOP, satellites NC/CNC/ DNC FMS Robotics AGV, ASRS Automated inspection Cells and centers Components Of CIM

  18. Adoption Of Technology • Technology Readiness • Need well-designed products & efficient processes • Technology Design • Know what to automate • Technology Selection • Choose the right level • Technology Integration • Have a strategy for incremental automation

More Related