1 / 2

Arc Tracking Test 18 from NASA-STD-6001

Arc Tracking Test 18 from NASA-STD-6001. Purpose: Determine ability of wire insulation materials or constructions to resist arc tracking and access damage caused by initial arcing and restrike events

coby
Télécharger la présentation

Arc Tracking Test 18 from NASA-STD-6001

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Arc TrackingTest 18 from NASA-STD-6001 • Purpose: Determine ability of wire insulation materials or constructions to resist arc tracking and access damage caused by initial arcing and restrike events • Phenomena whereby an arc between two or more wires, once initiated, will sustain itself through a conductive path provided by degradation of the insulation for a measurable length MAPTIS Presentation

  2. Arc TrackingTest in Progress • Typical Specimen • 7 wire bundle 46 cm in length • Arc Initiation • Short circuit of conductor ends by dry graphite powder • Test Conditions • Worst-case environment • 5 kW, 400 Hz, 3-phase, 200 volt/ 50 amps RMS • Acceptance Criteria • Wire configuration is resistant to arc tracking if it does not exhibit arc propagation on either initial or reapplication of power MAPTIS Presentation

More Related