1 / 14

NCSX Mod Coil R&D/Tooling Activity Update

NCSX. NCSX Mod Coil R&D/Tooling Activity Update. Jim Chrzanowski & NCSX Team January 21, 2004. Modular Coil Winding Activities. NCSX. New conductor “Inch-worm casting Twisted Racetrack coil Keystone tests Epoxy impregnated conductor- mechanical & thermal tests

Télécharger la présentation

NCSX Mod Coil R&D/Tooling Activity Update

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NCSX NCSX Mod Coil R&D/Tooling Activity Update Jim Chrzanowski & NCSX Team January 21, 2004

  2. Modular Coil Winding Activities NCSX • New conductor • “Inch-worm casting • Twisted Racetrack coil • Keystone tests • Epoxy impregnated conductor- mechanical & thermal tests • Modular coil production tooling

  3. Copper Conductor NCSX • New copper conductor has been received from New England Electric Wire Corp. for testing • (10) 200+ foot spools of regular processed w/lubricant compacted copper conductor • (8) 200+ foot spools of clean process conductor • Conductor size 0.350 in. x 0.391 in. +/- 0.010 inch with 0.004 in. nylon serve • Conductor was received with (2) half-lapped layers of 0.004 inch think S-2 glass insulation applied

  4. NCSX RGA Results -Both conductor types were baked out and RGA pressure monitored -The peaks seen are oxygen, nitrogen, water and argon, typical of cleaned parts exposed to room air No significant difference is noted

  5. NCSX “Inch-Worm” Coil Winding Activities • Inch-worm casting has been mounted to a tilt turn table located in the D-site basement for trials • Trials will begin next week • Inch-worm will be used to: -Develop tooling & measurement devices; train personnel and develop a better understanding in conductor handling and tolerance control

  6. NCSX Twisted Racetrack Coil Winding Activities • Casting contract was awarded to EIO with an expected delivery of March 31, 2004 • Winding will begin in April 2004 in the D-site Test Cell using the turning fixture and autoclave equipment • Need details of copper cladding as well as clamps to initiate component fabrication Casting pattern

  7. Keystone Tests NCSX • Keystone tests will begin next week. Tests will be similar to those performed on earlier conductors • New insulated conductor will be wound in both directions • Preliminary results should be available by the end of next week.

  8. Mechanical/Thermal Properties Tests NCSX • Preparations are under way to begin fabrication of additional specimens for testing the new impregnated conductor • New straight single specimen mold will be ready this week for 1st. VPI next week. (compression and flexural tests) • Undetermined number of 4-turn coils will be fabricated and used for testing tensile and fatigue properties- • Dimensions of winding forms required to proceed • All testing will be completed in-house at PPPL Matrix/spec is required to outline testing program

  9. Straight Tee-Specimen NCSX • Modifications have been made to the original straight tee section for reuse with the new conductor and insulation scheme • “Bag mold” grooves as well as additional clamp mounting holes have been added • Specimen will be produced following completion of the first VPI of specimens sometime next week. “Bag mold” grooves

  10. NCSX Modular Coil Fabrication- Turning Fixtures • All steel has been received for (4) frames and (3) support rings- additional (3) rings are being rolled at vendor • Majority of frame parts have been fabricated • First turning fixture will be operational by the end of February

  11. NCSX Modular Coil Fabrication -Autoclave Fabrication Upper dome flange is being machined on “Sellers” horizontal mill

  12. NCSX Modular Coil Fabrication -Autoclave Fabrication- continued Electrical panels being manufactured and assembled Salvaged vacuum pumps from PBX being used to provide vacuum

  13. NCSX Modular Coil Fabrication -Autoclave Fabrication- continued Ports being added to lower dome and chamber

  14. NCSX Additional Tasks • Completing layout of coil winding facility- with (2) winding stations • Begin generating a “MIT” plan for manufacturing Modular Coils • Complete Procurement plan for modular coil production • Begun identification by name of coil manufacturing team (17 technicians will be required at peak coil production mode)

More Related