1 / 38

Seismic Evaluation of Prestressed and Reinforced Concrete Pile-Wharf Deck Connections

Seismic Evaluation of Prestressed and Reinforced Concrete Pile-Wharf Deck Connections. Jennifer Soderstrom University of Washington. Introduction. Ports represent a large economic investment for a region Direct damage to the port of Kobe, Japan estimated to exceed U.S.$11 billion

coralie
Télécharger la présentation

Seismic Evaluation of Prestressed and Reinforced Concrete Pile-Wharf Deck Connections

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Seismic Evaluation ofPrestressed and Reinforced ConcretePile-Wharf Deck Connections Jennifer Soderstrom University of Washington

  2. Introduction • Ports represent a large economic investment for a region • Direct damage to the port of Kobe, Japan estimated to exceed U.S.$11 billion • It is worthwhile to evaluate the seismic performance of port facilities

  3. Typical Wharf Section

  4. Pile-Deck Connections • Piles are the sole supports for large gravity loads • Detailing must be sufficient to allow pile forces to develop and hinges to form • Repair and inspection can be difficult, so a connection should remain undamaged in a large seismic event

  5. Prototype Connections • Survey of Wharves in Los Angeles, Oakland and Seattle • Connection types used included: • Precast Pile Connection • Pile Extension Connection • Batter Pile Connection

  6. Precast Pile Connection • Most common connection was a 24 in octagonal prestressed pile • Pile set 2 in into deck • Hooked dowels grouted in pile ducts • Varying development lengths

  7. Pile Extension Connection • Cast prior to deck if length > 6 in • Hooked dowels grouted in pile ducts and passing through extension • Varying development lengths • Extended spiral in some connections

  8. Pile Section • 24 in octagonal prestressed pile most common • Details varied

  9. Test Methodology Connection types investigated in this study: • Pile Extension Connections • No spiral reinforcement in joint region • Moderate spiral reinforcement in joint region • Precast pile connections • No axial load • 222 kip axial load

  10. Specimen 1: Pile Extension

  11. Specimen 2: Pile Extension w/Spiral

  12. Specimens 3&4: Precast Pile

  13. Test Setup

  14. Axial Load System

  15. Testing Procedure • Modified ATC-24 loading sequence • Lateral displacement from 0.05% to 10.6% drift % drift = lateral deflection / pile length

  16. Experimental Results • Test observations • Force-deflection history • Moment-curvature history • Average curvature • Strain curvature • Strain distribution • Incremental strain distribution

  17. Test Observations – pile cracking 1 2 3 4 Cracking at 1.0% drift

  18. Test Observations – deck cracking Specimen 1 Specimen 3 Specimen 2

  19. Test Observations – end of tests 1, 2 Specimen 2 Specimen 1

  20. Test Observations – end of tests 3, 4 Specimen 3 Specimen 4

  21. Force-Deflection History – specimen 1 Peak load = 26.5 kips at 4.5% drift

  22. Force-Deflection History – specimen 3 Peak load = 30.7 kips at 3.0% drift

  23. Force-Deflection History – specimen 4 Peak load = 38.1 kips at 1.5% drift

  24. Moment-Curvature History Average curvatures • Calculated over intervals 0 to ½ diam. and ½ to 1 diam.

  25. Moment-Average Curvature • Specimen 1 • Lower curvature 2-3 times greater than upper curvature ½ to 1 diam. (upper) 0 to ½ diam. (lower)

  26. Moment-Average Curvature ½ to 1 diam. (upper) 0 to ½ diam. (lower) • Specimen 4 • Lower curvature 8-10 times greater than upper curvature

  27. Moment-Curvature History Strain curvatures • Calculated at distances of 8.25, 0 and –5 in from interface

  28. Moment-Strain Curvature • Specimen 2 • Strain curvatures highest in pile section 8.25 in interface -5 in

  29. Moment-Strain Curvature 8.25 in interface -5 in • Specimen 4 • Strain curvatures highest in deck

  30. Strain Distribution Specimens 1, 2 • Peak strains between interface and ½ diameter • Yield at 1.0% drift

  31. Strain Distribution Specimen 3 • Peak strains in deck, 5 in below interface • Yield at 0.75% drift • High strains in lower bar

  32. Strain Distribution Specimen 4 • Peak strains in deck, 5 in below interface • Yield at 1.0% drift

  33. Incremental Strain Distribution • D Strains at 1000 kip-in moment, first cycles • Exponential distribution indicates good bond Specimen 2 Good bond within deck

  34. Incremental Strain Distribution • D Strains at 1000 kip-in moment, specimen 3 • D Strains at 1500 kip-in moment, specimen 4 Specimen 3 Slip in top 5 in of deck Good bond in pile section

  35. Conclusions • All connections had large rotational capacities • Precast pile connections were initially stiffer • and stronger, but experienced greater • deterioration than pile extensions • A moderate axial load increased strength by • 25%, but caused greater deterioration at drift • levels above 2.0%

  36. Conclusions • Pile extensions dissipated more energy at high drift levels through continued flexural cracking, while damage in the precast connection was concentrated in large cracks near the interface • Precast pile connections experienced bond • slip and rocking in early load cycles

  37. Conclusions • The addition of spiral reinforcement in the • joint region did not appear to have a • significant effect on pile extension • performance

  38. Seismic Evaluation ofPrestressed and Reinforced ConcretePile-Wharf Deck Connections Jennifer Soderstrom University of Washington

More Related