1 / 23

Optimizing Converged Cisco Networks (ONT)

Optimizing Converged Cisco Networks (ONT). Module 3: Introduction to IP QoS. Lesson 3.5: Implementing QoS with Cisco AutoQoS. Objectives. Describe LAN and WAN features of Cisco AutoQoS. Identify the guidelines when using Cisco AutoQoS to implement QoS policies.

cutter
Télécharger la présentation

Optimizing Converged Cisco Networks (ONT)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Optimizing Converged Cisco Networks (ONT) Module 3: Introduction to IP QoS

  2. Lesson 3.5: Implementing QoS with Cisco AutoQoS

  3. Objectives • Describe LAN and WAN features of Cisco AutoQoS. • Identify the guidelines when using Cisco AutoQoS to implement QoS policies. • Describe the features of the Cisco Security Device Manager (SDM). • Explain how SDM can be used to implement QoS on Cisco devices. • Compare and contrast four methods for configuring QoS on a network.

  4. Cisco AutoQoS

  5. Cisco AutoQoS Features in a WAN

  6. Cisco AutoQoS Features in a LAN

  7. Cisco AutoQoS Use Guidelines • Make sure that: • Any QoS configurations on the WAN interface are removed. • CEF is enabled. • NBAR is enabled. • Correct bandwidth statement is configured on the interface. • Cisco AutoQoS is enabled on the interface.

  8. Cisco AutoQoS Example • Enable Cisco AutoQoS on relevant devices (such as LAN switches and WAN routers) that need to perform QoS.

  9. Cisco AutoQoS Example (Cont.) • interface Serial1/3 • ip cef • bandwidth 1540 • ip address 10.10.100.1 255.255.255.0 • auto qos voip IP CEF and Bandwidth AutoQoS for VoIP Traffic Recognized by NBAR

  10. Cisco Security Device Manager (SDM)

  11. Steps 1 to 4: Creating a QoS Policy 1. 3. 2. 4.

  12. Step 5: Launching the QoS Wizard

  13. Step 6: Selecting the Interface

  14. Step 7: Generating a QoS Policy

  15. Reviewing the QoS Configuration

  16. Completing the Configuration: Command Delivery Status

  17. Monitoring QoS Status 1. A B 2.

  18. Comparing QoS Implementation Methods

  19. Summary • Cisco AutoQoS simplifies and shortens the QoS deployment cycle. Cisco AutoQoS helps in all of the five major aspects of successful QoS deployments. • Cisco AutoQoS simplifies deployment and speeds provisioning of Quality of Service technology over a Cisco network infrastructure. It reduces human error and lowers training costs. • Cisco Security Device Manager (SDM) is an intuitive, web-based device management tool that was created for easy and reliable deployment and management of Cisco IOS routers.

  20. Self Check • What are the requirements that must be met in order to run AutoQoS? • What command is used to enable AutoQoS on an interface? • What traffic classes are supported by SDM? • Which method of configuring QoS is the hardest to implement, requires the most time and offers the least modularity?

  21. Q and A

  22. Resources • Cisco AutoQoS Q&A • http://www.cisco.com/en/US/partner/tech/tk543/tk759/tk879/technologies_q_and_a_item0900aecd8020a589.shtml • SDM Demo Lab (Live Demo) • http://www.cisco.com/en/US/partner/products/sw/secursw/ps5318/prod_presentation0900aecd802adc65.html • Cisco SDM Multimedia Demo • http://www.cisco.com/cdc_content_elements/flash/sdm/sdm.exe • SDM Presentations (VoDs) • http://www.cisco.com/en/US/partner/products/sw/secursw/ps5318/prod_presentation_list.html • SDM Homepage • http://www.cisco.com/en/US/products/sw/secursw/ps5318/

More Related