1 / 32

Data Communication Networks

Data Communication Networks. Lec 10. Multilevel Schemes. Goal is to increase the number of bits per baud. m data elements encoded into a pattern of n signal elements.

cynara
Télécharger la présentation

Data Communication Networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Data Communication Networks Lec10

  2. Multilevel Schemes • Goal is to increase the number of bits per baud. • m data elements encoded into a pattern of n signal elements. • Design are in coding of mBnL, m is the length of binary pattern, B means binary data, n is the length of signal pattern, L is the number of levels in the signaling. • A letter is often used in the place of L: B(binary) for L=2, T (ternary) for L=3 and Q(quaternary)for L=4. • First two letters define the data pattern and second two define signal pattern.

  3. Note In mBnL schemes, a pattern of m data elements is encoded as a pattern of n signal elements in which 2m ≤ Ln.

  4. 2B1Q(two binary, one quaternary) • In this encoding, m=2, n=1 and L=4. • Have four different signal level, receiver has to discern four different thresholds. • Used in DSL , to provide high speed connection by using telephone lines.

  5. Figure 4.10 Multilevel: 2B1Q scheme

  6. 8B6T(eight binary, six ternary) • Used for 100BASE-4T cable. • Idea is to encode a pattern of 8 bits as a pattern of 6 signal elements. • Each pattern has a weight of 0 or +1.

  7. Figure 4.11 Multilevel: 8B6T scheme

  8. 4D-PAM5(four dimensional five-level pulse amplitude modulation ) • 4D means data is send over four wires at a time.

  9. Multiline Transmission(MLT-3) • Three levels(+V,0, and -V)and three transition rules to move between levels. • If next bit is 0, no transition. • If next bit is 1, and current level is not 0, the next level is 0. • If next bit is 1, the current level is 0, the next level is opposite of the last nonzero level.

  10. Multiline Transmission(MLT-3) • One wonder, the signal rate is same as that for NRZ-I, but greater complexity. • Look at the worst –case. • A non-periodic signal as changed to periodic signal.

  11. Figure 4.13 Multitransition: MLT-3 scheme

  12. Table 4.1 Summary of line coding schemes

  13. Block Encoding • Need redundancy , to ensure synchronization and to provide some kind of inherent error detecting. • Block encoding changes a block of m bits into a block of n bits,where n is larger than m. • Division • Substitution • Combination

  14. Block Encoding • In division step, a sequence of bits is divided into group of m bits, e.g. 4B/5B , the original sequence is divided into 4-bit groups. • In substitution , m-bit group for n-bit group, e.g. 4-bit code to 5-bit group. • Finally , combine to form a stream.

  15. Note Block coding is normally referred to as mB/nB coding; it replaces each m-bit group with an n-bit group.

  16. Figure 4.14 Block coding concept

  17. 4B/5B(four binary/five binary) • Designed to use in combination with NRZ-I. • NRZ-I is synchronization problem(long sequence of 0s). • One solution is to change the bit stream , to having no sequence of 0s. • 4B/5B achieve this goal. • A block encoded scheme does not have more than three consecutive 0s.

  18. Figure 4.15 Using block coding 4B/5B with NRZ-I line coding scheme

  19. Table 4.2 4B/5B mapping codes

  20. Figure 4.16 Substitution in 4B/5B block coding

  21. Example 4.5 We need to send data at a 1-Mbps rate. What is the minimum required bandwidth, using a combination of 4B/5B and NRZ-I or Manchester coding? Solution First 4B/5B block coding increases the bit rate to 1.25 Mbps. The minimum bandwidth using NRZ-I is N/2 or 625 kHz. The Manchester scheme needs a minimum bandwidth of 1 MHz. The first choice needs a lower bandwidth, but has a DC component problem; the second choice needs a higher bandwidth, but does not have a DC component problem.

  22. Figure 4.17 8B/10B block encoding

  23. Disparity Controller • To prevent a long run of consecutive Os or Is, the code uses a disparity controller which keeps track of excess Os over Is (or Is over Os). • If the bits in the current block create a disparity that contributes to the previous disparity (either direction), then each bit in the code is complemented (a 0 is changed to a 1 and a 1 is changed to a 0).

  24. 4-3 TRANSMISSION MODES The transmission of binary data across a link can be accomplished in either parallel or serial mode. In parallel mode, multiple bits are sent with each clock tick. In serial mode, 1 bit is sent with each clock tick. While there is only one way to send parallel data, there are three subclasses of serial transmission: asynchronous, synchronous, and isochronous. Topics discussed in this section: Parallel TransmissionSerial Transmission

  25. Figure 4.31 Data transmission and modes

  26. Figure 4.32 Parallel transmission

  27. Figure 4.33 Serial transmission

  28. Note In asynchronous transmission, we send 1 start bit (0) at the beginning and 1 or more stop bits (1s) at the end of each byte. There may be a gap between each byte.

  29. Note Asynchronous here means “asynchronous at the byte level,” but the bits are still synchronized; their durations are the same.

  30. Figure 4.34 Asynchronous transmission

  31. Note In synchronous transmission, we send bits one after another without start or stop bits or gaps. It is the responsibility of the receiver to group the bits.

  32. Figure 4.35 Synchronous transmission

More Related