1 / 37

CHAPTER

13. CHAPTER. Gas-Vapor Mixtures and Air-Conditioning. (fig. 13-1). 13-1. The C p of Air. © The McGraw-Hill Companies, Inc.,1998. (Fig. 13-2). 13-2. Heat and Temperature Behavior in Superheated Vapor Region of Water.

danae
Télécharger la présentation

CHAPTER

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 13 CHAPTER Gas-VaporMixtures andAir-Conditioning

  2. (fig. 13-1) 13-1 The Cp of Air © The McGraw-Hill Companies, Inc.,1998

  3. (Fig. 13-2) 13-2 Heat and Temperature Behavior in Superheated Vapor Region of Water At temperatures below 50•C, the h= constant lines coincide with the T= constant lines in the superheated region of water

  4. (Fig. 13-3) 13-3 Determining the hg of Water

  5. (Fig. 13-4) 13-4 For Saturated Air, Vapor Pressure is Equal to the Saturated Pressure of Water

  6. 13-5 Expressing the Enthalpy of Moist Air The enthalpy of moist (atmospheric) air is expressed per unit mass of dry air, not per unit mass of moist air

  7. (Fig. 13-8) 13-6 Moist Air Constant-Pressure Cooling and Dew-Point Temperature on T-s Diagram of Water

  8. Liquid water (Fig. 13-11) 13-7 Adiabatic Saturation Process and its Representation on a T-s Diagram

  9. (Fig. 13-13) 13-8 Sling Psychrometer

  10. (Fig. 13-14) 13-9 Schematic for Psychrometric Chart

  11. (Fig. 13-15) 13-10 Dry-Bulb, Wet-Bulb, and Dew-Point Temperatures Identical for Saturated Air Quality is related to the horizontal differences of P-V and T-v diagrams

  12. (Fig. 13-20) 13-11 Various Air-Conditioning Processes

  13. (Fig. 13-27) 13-12 Evaporative Cooling At a given P and T, a pure substance will exist as a compressed liquid if T<Tsat @ P

  14. (Fig. 13-29) 13-13 Mixing Airstreams Adiabatically When two airstreams at states 1 and 2 are mixed adiabatically, the state of the mixture lies on the straight line connecting the two states

  15. (Fig. 13-31) 13-14 Schematic and Psychrometric Chart for Example 13-8

  16. (fig. 13-32) 13-15 A Natural-Draft Cooling Tower

  17. 13-16 A Spray Pond

  18. In this chapter we discussed the air-water-vapor mixture, which is the most commonly encountered gas-vapor mixture in practice. The air in the atmosphere normally contains some water vapor, and it is referred to as atmospheric air. By contrast, air that contains no water vapor is called dry air. 13-17 Chapter Summary

  19. In the temperature range encountered in air-conditioning applications, both the dry air and the water vapor can be treated as ideal gases. 13-18 Chapter Summary

  20. The enthalpy change of dry air during a process can be determined from 13-19 Chapter Summary

  21. The atmospheric air can be treated as an ideal-gas mixture whose pressure is the sum of the partial pressure of dry air Pa and that of the water vapor Pv,P = Pa + Pv 13-20 Chapter Summary

  22. The enthalpy of water vapor in the air can be taken to be equal to the enthalpy of the saturated vapor at the same temperature:in the temperature range - 10 to 50oC (15 to 120oF). 13-21 Chapter Summary

  23. The mass of water vapor present in 1 unit mass of dry air is called the specific or absolute humidity ,where P is the total pressure of air and Pv is the vapor pressure. 13-22 Chapter Summary

  24. There is a limit on the amount of vapor the air can hold at a given temperature. Air that is holding as much moisture as it can is called saturated air. 13-23 Chapter Summary

  25. The ratio of the amount of moisture air holds (mv) to the maximum amount of moisture air can hold at the same temperature (mg) is called the relative humidity ,wherePg = Psat @ t 13-24 Chapter Summary

  26. The relative and specific humidities can also be expressed asRelative humidity ranges from o for dry air to 1 for saturated air. 13-25 Chapter Summary

  27. The enthalpy of atmospheric air is expressed per unit mass of dry air, instead of per unit mass of the air-water-vapor mixture, as 13-26 Chapter Summary

  28. The ordinary temperature of atmospheric air is referred to as the dry-bulb temperature to differentiate it from other forms of temperatures 13-27 Chapter Summary

  29. The temperature at which condensation begins if the air is cooled at constant pressure is called the dew-point temperature TdP:Tdp = Tsat @ Pv 13-28 Chapter Summary

  30. Relative humidity and specific humidity of air can be determined by measuring the adiabatic saturation temperature of air, which is the temperature the air attains after flowing over water in a long channel until it is saturated,and T2 is the adiabatic saturation temperature. 13-29 Chapter Summary

  31. A more practical approach to determining the properties of air in air-conditioning applications is to use a thermometer whose bulb is covered with a cotton wick saturated with water and to blow air over the wick. The temperature measured in this manner is called the wet-bulb temperature Twb, and it is used in place of the adiabatic saturation temperature. 13-30 Chapter Summary

  32. The properties of atmospheric air at a specified total pressure are presented in the form of easily readable charts, called psychrometric charts. The lines of constant enthalpy and the lines of constant wet-bulb temperature are very nearly parallel on these charts. 13-31 Chapter Summary

  33. The needs of the human body and the conditions of the environment are not quite compatible. Therefore, it often becomes necessary to change the conditions of a living space to make it more comfortable. Maintaining a living space or an industrial facility at the desired temperature and humidity may require simple heating (raising the temperature), simple cooling (lowering the temperature), humidifying (adding moisture), or dehumidifying (removing moisture). Sometimes two or more of these processes are needed to bring the air to the desired temperature and humidity level. 13-32 Chapter Summary

  34. Most air-conditioning processes can be modeled as steady-flow processes, and therefore they can be analyzed by applying the steady-flow mass (for both dry air and water) and energy balances,Dry air mass:Water mass: Energy:where subscripts i and e denote inlet and exit states, respectively. The changes in kinetic and potential energies are assumed to be negligible. 13-33 Chapter Summary

  35. During a simple heating or cooling process (T2 >Tdp,1), the specific humidity remains constant, but the temperature and the relative humidity change. 13-34 Chapter Summary

  36. Sometimes air is humidified after it is heated, and some cooling processes include dehumidification (T2 <Tdp,1). In dry climates, the air can be cooled via evaporative cooling by passing it through a section where it is sprayed with water. 13-35 Chapter Summary

  37. In locations with limited water supply, large amounts of waste heat can be rejected to the atmosphere with minimum water loss through the use of cooling towers. 13-36 Chapter Summary

More Related