1 / 13

Li-Chuan Chen, Marian Muste, and Larry Weber

53:071 Principles of Hydraulics Laboratory Experiment #3 Analysis of Open-Channel Flow Transitions Using Specific Energy Diagram. Li-Chuan Chen, Marian Muste, and Larry Weber. Objective. To observe the changes in the behavior of the free surface when subjected to changes in the channel bed.

daniel-dotson
Télécharger la présentation

Li-Chuan Chen, Marian Muste, and Larry Weber

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 53:071 Principles of HydraulicsLaboratory Experiment #3Analysis of Open-Channel Flow Transitions Using Specific Energy Diagram Li-Chuan Chen, Marian Muste, and Larry Weber

  2. Objective • To observe the changes in the behavior of the free surface when subjected to changes in the channel bed.

  3. Principle

  4. Principle

  5. Apparatus — Flume

  6. ybump (ft) 0.24 x (ft) 5 5.87 6.96 7.78 Apparatus — Obstruction For x  5 ybump = 0 For 5 < x  5.87 ybump = 0.276x – 1.38 For 5.87 < x  6.96 ybump = 0.24 For 6.96 < x  7.78 ybump = 2.28 - 0.293x For x > 7.78 ybump = 0

  7. What are we going to do? • We are going to measure the water surface elevation along a open channel.

  8. Procedures • Establish a stabilized discharge in the system. • Measure the water level difference on the differential manometer for computing discharge. • Measure the water surface elevation upstream, above, and downstream of the obstruction. • Change the flow rate and repeat Step 2 and 3 for another flow condition. • Observe the ripples formed at the tip of the point gage.

  9. Flow Situation I Flow Situation II h= (ft); Q = (cfs); yc1= (ft) h= (ft); Q = (cfs); yc1= (ft) Track (ft) Water Surface Elevation (ft) Bump Geometry (ft) Actual depth (ft) Track (ft) Water Surface Elevation (ft) Bump Geometry (ft) Actual depth (ft) Data Sheet

  10. Analysis • Plot the water surface elevation in the vicinity of the channel transition. • Construct the specific energy diagram using the measured data. • Compare theoretical specific energy diagrams with the experimental curves. • Comment on the flow behavior in the two flow situation.

  11. Sample Result — Water Surface Profile

  12. Sample Result — Specific Energy Diagram

  13. Further Considerations • What are the main assumptions associated with the use of the specific energy diagram? • Comment on the differences noticed on the ripples produced by the point gage upstream and downstream the obstruction. • Analyze the water surface behavior for the same unit discharges used in your experiment hypothesizing the flow enters in the obstruction as supercritical flow.

More Related