1 / 12

Air Racer Design and Layout

Air Racer Design and Layout. Step 1 : Measure up 4” on each edge of the paper and make a mark. Connect the two marks with a line. Step 2 : Measure 11” along the bottom edge of the paper and along the line you just made and put a mark. Connect these with a line.

davin
Télécharger la présentation

Air Racer Design and Layout

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Air Racer Design and Layout

  2. Step 1: Measure up 4” on each edge of the paper and make a mark. Connect the two marks with a line.

  3. Step 2: Measure 11” along the bottom edge of the paper and along the line you just made and put a mark. Connect these with a line

  4. Step 3: Measure up 3” on each edge of the paper from the line you made earlier and make a mark. Connect the two marks with a line. Main Body Panel

  5. Step 4: Make two boxes by measuring from the left edge of the paper 3” and 6” along the middle line and top line. These will become the fins.

  6. Step 5: Make a mark ½” in from the edge of each box in the location shown Step 6: Make a mark ½” up on the line between the boxes as shown.

  7. Fin Fin Step 7: Connect the marks with a line to complete the fins.

  8. Fin Fin Step 8: Draw a line 3 ¾” to the right of the second fin as shown. Be sure to measure along both the top and bottom lines.

  9. Fin Fin Step 9: Measure in 3/8” from each side of the box and draw a dotted line. Be sure to put a mark at the top and bottom of each line.

  10. Step 10: Measure out 1/8” from each dotted line at the top of the box and put a mark as shown. Fin Fin Main Body Panel

  11. Step 11: Connect a line from these marks to the bottom corner of the box as shown. Air Scoop Fin Fin Main Body Panel

  12. Step 12: Have Mr. Merithew check all of your measurements before you cut out your parts. Cut only solid lines. Air Scoop Fin Fin Main Body Panel

More Related