1 / 8

PHASE TEST CNC

PHASE TEST CNC. See board The essential difference is the FEEDBACK Loop for comparing the desired output with the actual output. If a discrepancy occurs, an error signal will be generated to correct the output.

dawn-mack
Télécharger la présentation

PHASE TEST CNC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PHASE TEST CNC • See board • The essential difference is the FEEDBACK Loop for comparing the desired output with the actual output. If a discrepancy occurs, an error signal will be generated to correct the output

  2. Post-processing: Because of cost considerations, CAPP & CAM software produces generic CNC output. This output has to be converted (Post processed) into a format suitable for the particular CNC controller being used.

  3. The part of the software that converts all the cutter path coordinates data to a specific CNC machine control.

  4. i) Saves duplicating co-ordinates. • ii) Shortens the length of the program. • iii) Saves computer memory. Reduce program length • Able to edit only one line if required

  5. Direct Numerical Control Computer Aided manufacture Computer Aided Design

  6. Dry run, tool-path graphics, machine 'soft" material and any other suitable method • See board

  7. The start up procedure must include – • Turn the main isolator on. • Turn the screen on. Machine co-ordinates are visible. • Using the jog mode, jog all axes away from machine datum position. • Press the home button, press the axis buttons. • Check the machine co-ordinates are showing zero on all axes.

  8. Drum • Egg Box • Carousal • Turret • A continuous movement allows co-ordinated simultaneous motion in two or more axes

More Related