1 / 14

Review of Liquid Resin Molding Specifications

Review of Liquid Resin Molding Specifications. FAA Workshop September 2003 Scott Reeve National Composite Center. Areas of Comment. Use of Guidelines Format General Comments Resin Fiber Material/Part Acceptance Process. Use of Guidelines. Applaud drive towards industry standards

demetria-richmond
Télécharger la présentation

Review of Liquid Resin Molding Specifications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Review of Liquid Resin Molding Specifications FAA Workshop September 2003 Scott Reeve National Composite Center

  2. Areas of Comment • Use of Guidelines • Format • General Comments • Resin • Fiber • Material/Part Acceptance • Process NCC / Reeve Review of LRM Specifications

  3. Use of Guidelines • Applaud drive towards industry standards • Guidelines will help set the standards • Make sure UNIQUE features of LRM are addressed • Guidelines start to become de facto spec, policy • Deviations will face uphill battle • Want to minimize deviations so that near-term producer specs can eventually be superceded by industry specs NCC / Reeve Review of LRM Specifications

  4. Format • Educational information followed by examples and details is fine • Make the two documents consistent • Prefer the Material Spec format • Guidelines and example don’t always match • Material spec Section 3.1 • Process spec Section 2 NCC / Reeve Review of LRM Specifications

  5. General Comments • Provides good guidelines for specification structure, but does not go beyond autoclave prepreg enough • Needs to address more of the unique features of LRM • Preform and binder, not fabric • Resin formulations • Processing • Part variations NCC / Reeve Review of LRM Specifications

  6. Material Spec Guidelines • Good basic info on LRM (sections 1, 2) • Need more details on where the variabilities come from during LRM especially Vacuum Infusion • Will put reviewers, producers and customers on a similar information plane • Less focus on Receiving Inspection, more on Process Control NCC / Reeve Review of LRM Specifications

  7. Qualification • Assumes too much will be done by the resin supplier (Section 3.4) • Relies too heavily on what prepreggers did • More variables in LRM • Part producer is now controlling more of those variables • This is what gives him the design and manufacturing flexibility • Not all resin suppliers have the resources of traditional prepreg suppliers NCC / Reeve Review of LRM Specifications

  8. Resin Specification • Resin and mixing process must account / allow for variabilities needed to successfully fabricate parts • Viscosity, temperature, part size interactions • Bias towards one-part epoxies makes it difficult for less traditional resins to be used • Reaction driven cures must have mix varied for part size and desired properties • Reviewers, customers must be aware of this • Producers need to address this NCC / Reeve Review of LRM Specifications

  9. Fabric, Then Preform, Specification • Fabric spec is straightforward • Need to have a PREFORM spec • Preform spec can be for purchasing or accepting internally fabricated preforms • Recognize other preform constructions • Braid, 3D, Z-reinforced, discontinuous fibers • Have to address binder issues • Quantity, compatibility, tack, out time NCC / Reeve Review of LRM Specifications

  10. Cured Material Acceptance Spec • Need to address unique LRM issues • Resin-binder compatibility, binder movement • More complex shapes may not mirror physical or mechanical properties of flat panels • Cannot run full test matrices on all combinations • Use correlation factors, acceptable ranges and equivalency testing NCC / Reeve Review of LRM Specifications

  11. Vacuum Infusion / VARTM • There is interaction between fiber volume, thickness, loft, binder, shape that affect final part characteristics • Reviewers and customers must understand and accept • Producer must control parameters for parts • Identify key process parameters • Allowables • Translate from flat panels or else test elements • Affects downstream operations (NDI, assembly) NCC / Reeve Review of LRM Specifications

  12. Mechanical Properties & Testing • Section 3.4 (page 60) • Represents high end (prepreg for wings) • Add guidance reflecting part criticality • LRM will have to work its way up the structural hierarchy • Set some reasonable requirements for less demanding parts • Give LRM a chance to grow NCC / Reeve Review of LRM Specifications

  13. Process Spec • Good, basic tutorial with some LRM details • Degassing, non-supplier resin formulation • Need to include more on • The key attributes in Section 1.3 (discuss details in the later sections) • Tooling for RTM, VARTM, VI • Equipment • Facility (Section 2.5) may be more restrictive than necessary NCC / Reeve Review of LRM Specifications

  14. Summary • Guidelines and industry standards are a necessity • Coming at right time • Encouraging to see key guidelines • We will use it • Must include UNIQUE aspects of preforms and LRM • Technical and business sides • Don’t box new technology into the prepreg world • Need to allow for benefits and growth of new technology • Shared database will be have new set of issues NCC / Reeve Review of LRM Specifications

More Related