110 likes | 349 Vues
PULSION Medical Systems SE. PulsioFlex Software V4.0 – New Features. Data Visualization – SpiderVision. SpiderVision SpiderVision screen needs to be activated in the layout settings Shows dynamic changes of continuous parameters graphically Screen display and settings similar to PiCCO 2.
E N D
PULSION Medical Systems SE PulsioFlex Software V4.0 – New Features
Data Visualization – SpiderVision SpiderVision • SpiderVision screen needs to be activated in the layout settings • Shows dynamic changes of continuous parameters graphically • Screen display and settings similar to PiCCO2
Data Visualization – SpiderVision • SpiderVision configuration • To be opened by touching the Spider diagram • Basic: predefined basic settings • Individual: individual configuration (number of arms and parameters)
Data Visualization – Profile Profile • Profile screen needs to be activated in the layout settings • Static display of the values during the last thermodilution measurement • Screen display and configuration similar to PiCCO2
Data Visualization – Profile • Profile configuration • To be opened by toucing the Profile diagram • Left hand side buttons enables switching between the predefined parameter configurations • Individual configuration is not possible
PiCCO Thermodilution Measurement Values with insufficient pressure curve • In case a calibration cannot be performed due to an insufficient pressure signal, a related message appears on the screen • After confirmation the discontinuous thermodilution results are available
DO2 Calculation • Calculation of oxygen delivery (DO2) is now also available without CeVOX module • Input screen is opened by touching the DO2 button in the main menu • After entering the SaO2 and Hb values DO2 is calculated and displayed continuously
Data Acquisition – Start Trend Data Recording • Activation in the Main Menu • Pushing the Start button starts data recording • All parameter values are stored every 12 seconds for later download • File name is created automatically and indicated on the screen
Data Acquisition – Event Input • Events can always be put in by touching the input field next to ‘Add Event’ (max. 25 characters per event) • All entered events will be stored in the event list • Event inputs while data recording is running will also be stored in the export data file
Data Acquisition – Stop & Data Export • Stop button stops the recording and the save file is closed • Transferable files are listed • Plug in USB storage device to one of the USB ports and push Export Data • Observe screen messages on USB device detection and finishing of data export • File format is ‘.csv’ (comma separated values) which can be opened by spread sheet programs (e.g. MS Excel)
Thank you very much For your attention