1 / 30

Assessing Chip-Level Impact of Double Patterning Lithography

Assessing Chip-Level Impact of Double Patterning Lithography. Kwangok Jeong * , Andrew B. Kahng *,** , and Rasit O. Topaloglu *** http://vlsicad.ucsd.edu/ * ECE Dept., UC San Diego ** CSE Dept., UC San Diego *** GlobalFoundries, Inc. Outline. Double Patterning Lithography (DPL)

dixiem
Télécharger la présentation

Assessing Chip-Level Impact of Double Patterning Lithography

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Assessing Chip-Level Impact of Double Patterning Lithography Kwangok Jeong*, Andrew B. Kahng*,**, and Rasit O. Topaloglu*** http://vlsicad.ucsd.edu/ * ECE Dept., UC San Diego ** CSE Dept., UC San Diego *** GlobalFoundries, Inc.

  2. Outline • Double Patterning Lithography (DPL) • Traditional Interconnect Analysis • Additional Variability in DPL • Misalignment in Double Patterning • Analysis in Different DPL Options • Experiments • Conclusion

  3. Outline • Double Patterning Lithography (DPL) • Traditional Interconnect Analysis • Additional Variability in DPL • Misalignment in Double Patterning • Analysis in Different DPL Options • Experiments • Conclusion

  4. Double Patterning Lithography (DPL) • Pattern-doubling: • ‘2X-resolution’ lithography with ‘1X-resolution’ equipment • Taxonomy • Resist type: positive /negative • Methods: double exposure (DE) / double patterning (DP) / spacer double patterning (SDP) • Printed feature: line / space Resist Target layer Mask1 Resist 1X 1st Exposure Target layer Mask Mask2 1X 2nd Exposure 1X-resolution 2X-resolution

  5. Traditional Interconnect Analysis • Designers use capacitance tables from foundries • 2D/3D field solver with variations  Capacitance tables • Major sources of variation: • Metal/dielectric density-dependent systematic variation • Random process variation • Results of variation • Width (W) variation • Metal height (H) variation • Dielectric thickness (D) variation, etc. • Traditional interconnect variation analysis M+1 • 1. for (i = -3 ; i  3 ; i=i+1) { • for (j = -3 ; j  3 ; j=j+1) { • for (k = -3 ; k  3 ; k=k+1) { • W=Wnom + iW • H= Hnom + jH • D= Dnom + kD • run field solver over • parameterized structure}}} • Find nominal and worst-case capacitance H M W D M-1

  6. Additional Variability in DPL • Overlay error • Causes: • mask misalignment • material stress-impacted deformations • litho-/etch-impacted topography • lens aberration, etc. • Impacts on DPL • Width variation • Space (or pitch) variation  Capacitance variation • Alignment metric • Indirect: • Two DPL masks aligned to a reference layer • Error: • Direct: • Second DPL mask aligned to the first DPL mask • Error: Direct Alignment (DA) Indirect Alignment (IA) S S S S Cc Cg

  7. Outline • Double Patterning Lithography (DPL) • Traditional Interconnect Analysis • Additional Variability in DPL • Misalignment in Double Patterning • Analysis in Different DPL Options • Experiments • Conclusion

  8. S Misalignment in Positive DE/DP mask1 (misaligned to left) mask2 Positive photoresist Dielectric After exposure + etch Cu filling Space on one side increases Space on the other side decreases Required design of experiments foreach S (-3 ~ 3) mask1  shift by +S/2 mask2  shift by –S/2 end S 1 2 1 2 1 W W

  9. S S Misalignment in Negative DE/DP mask1 mask2 (misaligned to left) Negative photoresist Dielectric After exposure + etch After filling Cu Width of one increases Width of the other decreases Required design of experiments foreach S  (-3 ~ 3) mask1  change Wby +S  shift by S/2 mask2  change W by –S  shift by S/2 end 1 2 1 2 1 W’’ W’ P P S/2

  10. S S Spacer Thickness Variation in Positive SDP Primary patterns Spacers (act as if masks) (kind of) Positive photoresist Dielectric After exposure + etch After filling Cu Cu 1 2 1 2 1 Width and space change Required design of experiments foreach S  (-3 ~ 3) mask1  change W by 0 mask2  change W by +S end W’’ W P P

  11. S S Spacer Thickness Variation in Negative SDP Primary patterns Spacers (act as if masks) (kind of ) Negative photoresist Dielectric After exposure + etch After filling Cu Cu Width and space change Required design of experiments foreach S  (-3 ~ 3) mask1  change W by +S/2  shift by +S/4 mask2  change W by +S/2  shift by –S/4 end 1 2 1 2 1 W’ W’ P’’ P’

  12. Outline • Double Patterning Lithography (DPL) • Traditional Interconnect Analysis • Misalignment in Double Patterning • Analysis in Different DPL Options • Experiments • Conclusion

  13. Experiments: Scenarios • We examine impact of misalignment and linewidth variation across various DPL options Alignment Photoresist Process DE Parallel 5-Interconnect Structure (TCAD tool) Positive Indirect Positive DP Negative Negative Direct SDP DE Direct Interconnects in a full-chip (Signoff RCX) DP SDP

  14. TCAD-Based BEOL Analysis Results • Capacitance variation due to misalignment in DE/DP • IA shows larger variation than DA • Negative resist processes have larger variation • Capacitance variation in different DPL options • SDP has larger variation • Negative resist processes have larger variation Capacitance (aF/um) Capacitance (aF/um)

  15. Design-Level Analysis - Flow • Overlay-aware extraction flow TOP.GDS AES core with NanGate 45nm Tech. 1. Design GDS Initial GDS 2. Split GDS ILP-based min cost coloring (Kahng et al. ICCAD08) Non-DPL layers 3. Pattern Decomposition DPL layers Sub-GDS1 Base GDS Coloring and Splitting Sub-GDS1-1 Sub-GDS2 Sub-GDS1-2 Sub-GDS2-1 4. Shift and Merge (Cadence Virtuoso) Sub-GDS2-2 Shifting and Merging TOP.GDS 5. Resize and Extraction (Synopsys Hercules, Star-RCXT) Resizing

  16. Design-Level Capacitance Variation • Overlay error can cause more than +/- 10% capacitance variation within a die, for all DPL options  Large on-chip variation  Increase of timing optimization difficulty Capacitance Variation (%) M4 M5 M3 M2

  17. Maximum Crosstalk-Induced Delay • A net having maximum crosstalk delay (17um long) • SDP shows more sensitivity  tighten overlay spec • P-DE/DP shows least sensitivity  lessen overlay spec M4 M4 M2 M2 M4 |S| |S|/2 |S|/2 |S|/2 P-DE/DP (Space on one side) N-DE/DP (Width) P-SDP (Spaces on both sides) N-SDP (Space & width) w/o metal fill w/ metal fill

  18. Total Negative Slack Variation • SDP, especially for lower layer (smaller feature), shows more sensitivity  tighter overlay spec TNS Variation (%)

  19. Outline • Double Patterning Lithography (DPL) • Traditional Interconnect Analysis • Misalignment in Double Patterning • Analysis in Different DPL Options • Experiments • Conclusion

  20. Summary of Observations • Overlay error with indirect alignment (IA) results in higher capacitance variations compared to direct alignment (DA) • Capacitance can vary > 10% due to misalignment  Large OCV  increase timing optimization difficulty • Timing can be degraded significantly, e.g., > 10% worse TNS • P-DE/DP may be the most favorable option for BEOL DPL • With the same 3 overlay control, the variation in P-DE/DP is 50% of N-DE/DP or P-SDP, and 25% of N-SDP   Overlay control spec for P-DE/DP can be relaxed by 2X compared to others

  21. Conclusion and Ongoing Work • We provide a variational interconnect analysis framework for double patterning lithography • We analyze mechanisms of interconnect variations due to misalignment and spacer thickness variation in DPL • We provide both interconnect and design-level RC-extraction framework reflecting interconnect variation in a 45nm DPL process • We compare the impact of overlay error in different DPL options • Ongoing work • Development of timing analysis and optimization methodology considering interconnect variation in DPL • Incorporation of statistical techniques to target pessimism reduction

  22. Thank You!

  23. Impact of Misalignment on FEOL • Standard cell decomposition • Experimental setup • 10nm 3 misalignment is assumed between layers • Design of experiments (all permutation: 3*3*3*3 = 81 cases) • P1: -10nm (L) / 0nm (C) / +10nm (R) • P2: -10nm (L) / 0nm (C) / +10nm (R) • M: -10nm (L) / 0nm (C) / +10nm (R) • C: -10nm (L) / 0nm (C) / +0nm (R) Original P1 P2 M C BASE

  24. Experimental Results on FEOL • Flow • Impact of misalignment on cell delay is negligibly small (< 2%) • Capacitance variation due to misalignment << gate capacitance • Measured Delay Variation (%) Tr-level RC-Extraction STAR-RCXT Circuit Simulation HSPICE

  25. DPL Options • Spacer-DP • Double Exposure • Double Patterning Mask Resist Resist Resist Hardmask Hardmask Target layer Buffer oxide Target layer Hardmask Target layer Mask1 Mask1 Target layer 1st Litho-etch mask 1st Exposure 1st Litho-etch positive resist Mask2 negative resist Mask2 Spacer formation Oxide depo. CMP 2nd Litho-etch 2nd Exposure Dielectric After exposure & etch 2nd etch Cu interconnect Spacer removal • Printed Feature • Photoresist After Cu filling mask (a) Positive-tone (b) Negative-tone positive resist Dielectric Poly After exposure & etch Cu interconnect Poly (a) Spaces (Trench-First) (b) Lines

  26. Mask Coloring and Layout Examples in DPL • Mechanism of misalignment-induced variation 2 2 4 4 2 4 4 2 S S 6 6 6 6 1 1 1 1 3 5 3 3 5 5 3 5 Original patterns Coloring Patterns 1 Patterns 2 (a) DE and DP Process Dummy for pattern 6 Spacer (gray) a Narrow space b 2 4 W 1 6 3 5 W” Original patterns Coloring Trim & repair (dark gray) Spacer formation (Large spacer) (b) SDP Process

  27. Design-Level Analysis - DOE • Design of Experiments for DE/DP with DA • foreachlayer { M2, M3, M4, M5 } • decompose layer into layermask1 and layermask2 • foreachS { -3/2, -2/2, -/2, 0, /2, 2/2, 3/2} • shift layermask1 by S • shift layermask2 by –S • end • layer layermask1 + layermask2 • foreachW { -3/2, -2/2, -/2, 0, /2, 2/2, 3/2} • resize layer by W • end • merge with other layers • RC-Extraction and Timing Analysis • end

  28. Impact on Capacitance Variation • Total interconnect capacitance: maximum C(%) • Among top 20% high capacitance nets • Impact of overlay < impact of width • Sum of capacitance in the most critical path • Critical path has short interconnects  impact of BEOL variation significantly reduces • Impact of overlay < impact of width

  29. Impact on Crosstalk-Induced Delay • Maximum coupling induced delay change • PrimeTime-SI (Synopsys) is used to find a net that is mostly affected due to crosstalk • Temporal/functional filtering is performed • Selected net structure • A net with relatively small length (~17um) can have >10% delay changes due to overlay error M4 segment: 14.788um M2 segment: 1.604um M3 segment: 0.78um Capacitance when Delay is maximum Capacitance when Delay is minimum

  30. Impact on Timing • Longest path and total negative slack (TNS) • Impact of overlay << impact of width • Longest path delay changes negligibly • However, overall timing (TNS) can change significantly Total Negative Slack (ns)

More Related