1 / 24

Regulators’ use of standards

This presentation analyzes the use of standards by national regulators in their regulatory documents, with a focus on the offshore petroleum industry. It provides an overview of the regulators covered, types of regulatory documents, and the standards referenced. The report aims to provide a benchmark for regulators' use of standards and support OGP's interactions with regulators.

dkathryn
Télécharger la présentation

Regulators’ use of standards

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Regulators’ use of standards Neftegazstandart conference, 9-11 September 2009, Kazan Alf Reidar Johansen OGP Standards Manager

  2. Introduction • This presentation reflects the current situation of national regulators' reference and use of standards in their regulatory documents. • Particular focus on offshore petroleum industry and standards for materials, equipment, systems and structures. • This presentation is based on a draft OGP report* that analyzes the documents prepared by the regulators themselves. *) Assumed to be published fall 2009 and freely available at www.ogp.org.uk.

  3. Standards’ place in the package

  4. Regulators covered • Canada, represented by: • Canadian Nova Scotia Offshore Petroleum Board (CNSOPB) • Canadian Newfoundland Offshore Petroleum Board (CNOPB) • Danish Energy Agency (DEA); Denmark • Department of Labour (DoL), New Zealand • Ministero dello Sviluppo Economico (MES), Italy • National Agency of Petroleum, Natural Gas and Biofuels (ANP), Brazil • National Offshore Petroleum Safety Authority (NOPSA), Australia • Oil Industry Safety Directorate (OISD), India • Petroleum Safety Authority (PSA), Norway • State Supervision of Mines (SODM), The Netherlands • UK Health and Safety Executive (HSE), UK • United States represented by: • US Coast Guard (USCG) • US Minerals Management Service (US MMS).

  5. Areas examined

  6. Purpose of OGP Report • Provide for better understanding of use of national, regional, international and industry standards in the regulatory documents • provide a good basis for OGP interactions with the relevant regulators and in particular the IRF • provide relevant background material for the prioritization of international standards work • provide a better basis for the evaluation of OGP’s position on development and use of international standards. Ref. OGP Report No. 381, April 2007 • provide a benchmark on regulators' use of standards.

  7. Numerous types of regulatory documents Guidelines Management practices Standards Rules Guidance Notes Code of Practices Memoranda Interpretations. • Acts • Law • Decree • Regulations • Executive orders • Directives • Amendments to Acts and Regulations

  8. Regulators references to standards 1.348 references in total

  9. Summary of references by Standards Development Organisations NORSOK

  10. Summary of references by regulators analyzed • 1.348 references to standards in total • 1.142 of these references are to different, individual standard titles. • From more than 60 different standards development organisations around the globe. • Of the 1.142 different standards, as many as 989 or 87% are referenced by one regulator only. • Only 13% of the standards to be referenced by two or more regulators. Note: Russia not included and China has no specific references to standards in their regulatory documents.

  11. Number of standards referenced by individual regulator

  12. Category of standards referenced by individual regulator

  13. Standards mostly referenced • API Spec 6A* Wellhead and Christmas Tree Equipment • IMO Mobile Offshore Drilling Units (MODU) Code • API RP 14B* Subsurface Safety Valve Systems • API Spec 17J* Unbonded Flexible Pipe • IEC 60331-11 Fire resisting characteristics of electric cables • API RP 14C* Basic Surface Safety Systems • API RP 521* Pressure-Relieving and Depressuring Systems • API Spec 14A* Subsurface safety valves • NFPA 13 Installation of sprinkler systems. • ANSI/ASME VIII-1 Pressure Vessels • NACE MR 01-75* Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments *) also available as ISO/TC 67 standard By 5 By 4 regulators

  14. Duplicating standards for pipelines transportation systems • ANSI/ASME B31.4 Liquid Transportation Systems for Hydrocarbons • ANSI/ASME B31.8 Gas Transmission and Distribution Piping Systems • API RP 1102 Pipelines Crossing Railroads and Highways • API RP 1111 Offshore Hydrocarbon Pipelines • CAN/CSA-Z184-92, Gas Pipeline Systems • CAN/CSA-Z187-M87 Offshore Pipelines (replaced by Z662-07) • DNV OS-F101 Submarine Pipeline Systems • EN 14161 Pipeline Transportation Systems (Adoption of ISO 13623) • ISO 13623 Pipeline transportation systems • NEN 3650 Requirements for pipeline systems • NZS 5223 High Pressure Gas and Petroleum Liquids Pipelines • PD 8010-2 Code of practice for pipelines: Subsea pipelines

  15. Country of origin of standards referenced

  16. Region of origin of referenced standards

  17. Oil & gas industry can influence

  18. Summary so far • References to industry standards (44%) dominates, then to national standards (35%) and finally international standards (21%). • Regional origin of standards is 40% from SDOs in N&S America, 24% from Europe, 21% are international standards and 15% emanates from SDOs in India and Australasia. • API standards are dominating with 225 references, including 49 API MPMS standards. • ISO has delivered 152 of the standards, including 59 from the work of ISO/TC 67.

  19. Sharing and single references: Canada and US regulators

  20. Sharing and single references: Denmark, Norway and UK regulators

  21. Other observations • Many standards referenced cover the same subject and duplicate each other. • E.g. offshore structures and pipelines. • Mix of references to dated (e.g. Norway, US) and undated revisions. • Referenced standards appear to be voluntary in most of the regulatory regimes. • Other technical solutions can be opted for provided proof of compliance can be documented.

  22. Conclusions • Standards play an important role in the regulators definition of the desired safety level of oil and gas installations they regulate. • The diversity of references provides a challenge for international operators. • Duplication of standards should be looked into for harmonization. • The oil and gas industry is able to directly influence the content of 380 of the standards listed in this report and therefore is largely responsible for their development and maintenance.

  23. Conclusions cont. • There is a significant increase in the reference to international standards and a sharp decrease in references to national standards compared with PETROL96. • However, with the figure of only 21% references to international standards by the regulators, it is evident there is still a lot of work to be done. Global Standards Used Locally Worldwide

  24. Questions? Alf Reidar Johansen OGP Standards Manager Email: arj@ogp.org.uk Mobile: +47 95 029 079

More Related