1 / 5

How to Setup a Router?

Connect your modem to the internet port of the NETGEAR router and your computer to any of the four LAN ports. Switch the computer, router, and broadband/cable modem, off and on again. Wait for them all to finish booting up. If you still face any Issue, you can contact your Brand manufacturer for Netgear Router Technical Support or Netgear Router Customer Support. Visit : http://routerhelpnumber.com/Netgear-Router.php

dm4111635
Télécharger la présentation

How to Setup a Router?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to Setup a Router? • Connect your modem to the internet port of the NETGEAR router and your computer to any of the four LAN ports. • Switch the computer, router, and broadband/cable modem, off and on again. Wait for them all to finish booting up. • Open a web browser and type the router's IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Enter. You are prompted to log into the router. The default username is admin and the default password is password. The username and password are case-sensitive. If the default username and password is not working, you might have changed the password. Please try other passwords that you might have changed to. Otherwise, a factory reset is needed to restore the router to factory defaults. To perform a factory reset, see Restoring a NETGEAR home router to the factory default settings. • Click Setup Wizard.The Setup Wizard screen displays. • Click Next. The router saves the settings. • (Optional) To check if you are connected to the internet, select Router Status under Maintenance. • NOTE: Following same steps you need to setup another router.

  2. Steps to connect to wireless routers? • Check Your Internet Connection • Place the Router • Connect to Power • Connect to Your Internet Source • Access the Router's Web Interface • Connect Wired Devices • Connect Your PC or Device to Wi-Fi Once you are done with setup of both the router, you can proceed to connect the two in same network.

  3. How do I connect 2 routers in same network? Set the Internet Gateway of router 2 to router 1's IP address. Connect the two routers using a wired connection from any of port 1-4 in router 1 to any of port 1-4 in router 2. You can use a Wireless Media Bridge or Powerline Ethernet Kit to create a wired connection. DO NOT use router 2's WAN port.

  4. If you still face any Issue, you can contact your Brand manufacturer for Netgear Router Technical Support or Netgear Router Customer Support. If you can’t resolve your Issues with your Brand manufacturer, you can contact Support For Netgear Router at www.routerhelpnumber.com You can contact using chat support or drop a mail at support@routerhelpnumber.com

  5. Thank you for Watching chat with us now at www.routerhelpnumber.com

More Related