1 / 14

Position Detection and Identification of Products using RFID Technology

Position Detection and Identification of Products using RFID Technology. Master Thesis Christian Decker Supervisor: Michael Beigl This thesis representation was held at TecO on September 20 th 2002 http://www.teco.edu/~cdecker/pub/publications.html. Structure. Problem + Today‘s Situation

duvall
Télécharger la présentation

Position Detection and Identification of Products using RFID Technology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Position Detection and Identification of Products using RFID Technology Master Thesis Christian Decker Supervisor: Michael Beigl This thesis representation was held at TecO on September 20th 2002 http://www.teco.edu/~cdecker/pub/publications.html

  2. Structure • Problem + Today‘s Situation • Goal • SmartShelf Technology • Prototypes • Conclusion

  3. quantity+type of products (purchase) quantity+type of products (sale) Problem Scenario: traditional retail business ??? • Quantity of products on shelfes (Out-of-Stock problem) • History of products • Success of product placement

  4. Today‘s Situation • Refill of shelfes happens at fixed points in time – not driven by necessity • Product placement • rearrangement of products in stores to stimulate the consumer‘s buying behavior (Surprise-Effect) • test of sales combinations of similiar products (trial-and-error) There is no quantitative proposition about the interactions of the consumer!

  5. Goal: Interaction Detection System • Consumer buying behavior • remove, add, move (basic interaction patterns) • Improvement of existing systems • automatic re-order systems • statistics • Provide new services • recommender-, broker-, help desk-systems • electronic pricing

  6. SmartShelf – ID Technology • Identification and position detection of products using RFID • insensitive to dirt, wetness etc., tiny, contactless, no internal power supply • products equipped with transponders (price!) • H400x EM Marin • 125kHz • not collision aware • 130ms read cycle • 40bit ID,read-only

  7. SmartShelf – Design • Identification • every transponder has its own unique ID • Position detection – 3 reading units in parallel • big detection surface divided into smaller RFID detection spots (here: only 1 transponder per spot)

  8. SmartShelf – Antennas • Requirements • local detection through “limited” reading field • homogenous reading field • big detection surface with only a few antennas

  9. SmartShelf – Function • Detection – Gathering – Communication

  10. SmartShelf – Sychronisation • Synchronisation of communication • serial communication, TTL, fixed length of data • among the reading units: start of communication is determined via signals (READY,Request(RQ) ) • to external systems: CTS signal and Command/Response • Sychronisation of antenna activation • fixed schema for activation of antennas • avoids reading collisions of adjacent detection spots • avoids simultaneous activation of two antennas on the same reading unit

  11. SmartShelf – Synchronisation 2 • Timing synchronisation • max. time for activation+reading of an antenna is taken to determine the start of the next step in the program’s execution • Address sychronisation • central unit addresses an antenna for reading, sets up the time pattern for all • Barrier synchronisation • all reading units work independently until a sync point – program blocks there! • global signal to continue the program’s execution

  12. SmartShelf – Software • Memory function • problem: assignment of transponders is not stable • assumption: detected transponders do not disappear suddenly • if apparently disappeared, then several read trials • increases stability, but needs time • Fast Update • transmission of data starts even if not all antennas were checked again for transponders • disadvantage: part of the informationen is out of date

  13. SmartShelf – Prototypes • 1st Prototype: • built completely by hand • address sychronisation • error-prone hardware, instable software, slow • 2nd Prototype: • PCB, optimization of antenna’s characteristic • barrier synchronisation, memory function, fast update • hardware reliable, fast, 99.7% detection reliability • 3rd Prototype: • spike filter • tweaking of parameters without reprogramming • fast, automatic tweak control

  14. Conclusion • Identification+position detection (99.7% reliable) • Basic interaction patterns (remove, add und move) can be detected – consumer behavior can be acquired quantitativly • Detection speed too low – Goal: realtime detection of interaction patterns • Standard interface allows integration in existing systems and development of new applications (recommender and broker systems)

More Related